Commit Graph

557 Commits

Author SHA1 Message Date
Poul-Henning Kamp
bc8c3c3e37 Fix a 3 year old oversight: Remove the #ifdef/#endif pair now that there
is nothing between them anymore.

Spotted by:	peter.
2002-09-21 07:59:06 +00:00
Mitsuru IWASAKI
076ef4620b Restore status register A of RTC at resume time.
This should fix the 'too many RTC interrupts and statclock seems
broken after resume' problem.

MFC after:	1 week
2002-09-18 07:34:04 +00:00
Jonathan Mini
30abe507c0 Add kernel support needed for the KSE-aware libpthread:
- Maintain fpu state across signals.
	- Save and restore FPU state properly in ucontext_t's.

Reviewed by:	bde, deischen, julian
Approved by:	-arch
2002-09-16 19:25:59 +00:00
Peter Wemm
f7749f924c Automatically enable CPU_ENABLE_SSE (detect and enable SSE instructions)
if compiling with I686_CPU as a target.  CPU_DISABLE_SSE will prevent
this from happening and will guarantee the code is not compiled in.

I am still not happy with this, but gcc is now generating code that uses
these instructions if you set CPUTYPE to p3/p4 or athlon-4/mp/xp or higher.
2002-09-07 07:02:12 +00:00
Peter Wemm
f1b665c8fe Revive backed out pmap related changes from Feb 2002. The highlights are:
- It actually works this time, honest!
- Fine grained TLB shootdowns for SMP on i386.  IPI's are very expensive,
  so try and optimize things where possible.
- Introduce ranged shootdowns that can be done as a single IPI.
- PG_G support for i386
- Specific-cpu targeted shootdowns.  For example, there is no sense in
  globally purging the TLB cache for where we are stealing a page from
  the local unshared process on the local cpu.  Use pm_active to track
  this.
- Add some instrumentation for the tlb shootdown code.
- Rip out SMP code from <machine/cpufunc.h>
- Try and fix some very bogus PG_G and PG_PS interactions that were bad
  enough to cause vm86 bios calls to break.  vm86 depended on our existing
  bugs and this was the cause of the VESA panics last time.
- Fix the silly one-line error that caused the 'panic: bad pte' last time.
- Fix a couple of other silly one-line errors that should have caused more
  pain than they did.

Some more work is needed:
- pmap_{zero,copy}_page[_idle].  These can be done without IPI's if we
  have a hook in cpu_switch.
- The IPI handlers need some cleanup.  I have a bogus %ds load that can
  be avoided.
- APTD handling is rather bogus and appears to be a large source of
  global TLB IPI shootdowns for no really good reason.

I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop.
I expect to see a bigger difference when there is significant pageout
activity or the system otherwise has memory shortages.

I have backed out a few optimizations that I had been using over the last
few days in order to be a little more conservative.  I'll revisit these
again over the next few days as the dust settles.

New option:  DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
Peter Wemm
9ecb46bf87 The clock is already allocated as 'fast' - no need to try and intercept a
'slow' interrupt registration and convert it into 'fast'.
2002-07-08 09:12:22 +00:00
Peter Wemm
160554fbf4 Remove a couple of __P() stragglers. 2002-06-29 02:32:34 +00:00
Mark Peek
5e3939b59b Clock frequencies reported by sysctl should be unsigned values. Discovered
when machdep.tsc_freq returned a negative number on a 2.2GHz Xeon.

Submitted by:	Brian Harrison <bharrison@ironport.com>
Reviewed by:	phk
MFC after:	1 week
2002-06-22 16:30:18 +00:00
Poul-Henning Kamp
2266fe776e Don't export timecounter structures under debug. with sysctl, they
contain no truly interesting data anymore.
2002-04-30 19:34:31 +00:00
Peter Wemm
db17c6fc07 Tidy up some loose ends.
i386/ia64/alpha - catch up to sparc64/ppc:
- replace pmap_kernel() with refs to kernel_pmap
- change kernel_pmap pointer to (&kernel_pmap_store)
  (this is a speedup since ld can set these at compile/link time)
all platforms (as suggested by jake):
- gc unused pmap_reference
- gc unused pmap_destroy
- gc unused struct pmap.pm_count
(we never used pm_count - we track address space sharing at the vmspace)
2002-04-29 07:43:16 +00:00
Poul-Henning Kamp
7e2d76ff05 Remove the tc_update() function. Any frequency change to the
timecounter will be used starting at the next second, which is
good enough for sysctl purposes.  If better adjustment is needed
the NTP PLL should be used.
2002-04-26 10:06:26 +00:00
Yoshihiro Takahashi
181593adec Move ICU_* defines into icu.h. 2002-04-06 08:25:05 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Matthew Dillon
182da8209d Stage-2 commit of the critical*() code. This re-inlines cpu_critical_enter()
and cpu_critical_exit() and moves associated critical prototypes into their
own header file, <arch>/<arch>/critical.h, which is only included by the
three MI source files that need it.

Backout and re-apply improperly comitted syntactical cleanups made to files
that were still under active development.  Backout improperly comitted program
structure changes that moved localized declarations to the top of two
procedures.  Partially re-apply one of the program structure changes to
move 'mask' into an intermediate block rather then in three separate
sub-blocks to make the code more readable.  Re-integrate bug fixes that Jake
made to the sparc64 code.

Note: In general, developers should not gratuitously move declarations out
of sub-blocks.  They are where they are for reasons of structure, grouping,
readability, compiler-localizability, and to avoid developer-introduced bugs
similar to several found in recent years in the VFS and VM code.

Reviewed by:	jake
2002-04-01 23:51:23 +00:00
Matthew Dillon
93e70a5f37 Tab-out the backslashes in icu_vector.s to make it more readable and to
match it up with apic_vector.s.
2002-03-27 05:43:11 +00:00
Matthew Dillon
d74ac6819b Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit().  Cleanup the td_savecrit field by moving it
from MI to MD.  Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).

Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections.  This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.

This is the stage-1 commit.  Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways.  This should
be temporary.

Reviewed by:	core
Approved by:	core
2002-03-27 05:39:23 +00:00
Bruce Evans
ea1499bf8f Fixed some style bugs in the removal of __P(()). The main ones were
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses.  Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
2002-03-23 16:01:49 +00:00
Warner Losh
ba74981e71 Fix abuses of cpu_critical_{enter,exit} by converting to
intr_{disable,restore} as well as providing an implemenation of
intr_{disable,restore}.

Reviewed by: jake, rwatson, jhb
2002-03-21 06:19:08 +00:00
Alfred Perlstein
89c9a48352 Remove __P. 2002-03-20 07:51:46 +00:00
Peter Wemm
d1693e1701 Back out all the pmap related stuff I've touched over the last few days.
There is some unresolved badness that has been eluding me, particularly
affecting uniprocessor kernels.  Turning off PG_G helped (which is a bad
sign) but didn't solve it entirely.  Userland programs still crashed.
2002-02-27 09:51:33 +00:00
Matthew Dillon
181df8c9d4 revert last commit temporarily due to whining on the lists. 2002-02-26 20:33:41 +00:00
Matthew Dillon
f96ad4c223 STAGE-1 of 3 commit - allow (but do not require) interrupts to remain
enabled in critical sections and streamline critical_enter() and
critical_exit().

This commit allows an architecture to leave interrupts enabled inside
critical sections if it so wishes.  Architectures that do not wish to do
this are not effected by this change.

This commit implements the feature for the I386 architecture and provides
a sysctl, debug.critical_mode, which defaults to 1 (use the feature).  For
now you can turn the sysctl on and off at any time in order to test the
architectural changes or track down bugs.

This commit is just the first stage.  Some areas of the code, specifically
the MACHINE_CRITICAL_ENTER #ifdef'd code, is strictly temporary and will
be cleaned up in the STAGE-2 commit when the critical_*() functions are
moved entirely into MD files.

The following changes have been made:

	* critical_enter() and critical_exit() for I386 now simply increment
	  and decrement curthread->td_critnest.  They no longer disable
	  hard interrupts.  When critical_exit() decrements the counter to
	  0 it effectively calls a routine to deal with whatever interrupts
	  were deferred during the time the code was operating in a critical
	  section.

	  Other architectures are unaffected.

	* fork_exit() has been conditionalized to remove MD assumptions for
	  the new code.  Old code will still use the old MD assumptions
	  in regards to hard interrupt disablement.  In STAGE-2 this will
	  be turned into a subroutine call into MD code rather then hardcoded
	  in MI code.

	  The new code places the burden of entering the critical section
	  in the trampoline code where it belongs.

	* I386: interrupts are now enabled while we are in a critical section.
	  The interrupt vector code has been adjusted to deal with the fact.
	  If it detects that we are in a critical section it currently defers
	  the interrupt by adding the appropriate bit to an interrupt mask.

	* In order to accomplish the deferral, icu_lock is required.  This
	  is i386-specific.  Thus icu_lock can only be obtained by mainline
	  i386 code while interrupts are hard disabled.  This change has been
	  made.

	* Because interrupts may or may not be hard disabled during a
	  context switch, cpu_switch() can no longer simply assume that
	  PSL_I will be in a consistent state.  Therefore, it now saves and
	  restores eflags.

	* FAST INTERRUPT PROVISION.  Fast interrupts are currently deferred.
	  The intention is to eventually allow them to operate either while
	  we are in a critical section or, if we are able to restrict the
	  use of sched_lock, while we are not holding the sched_lock.

	* ICU and APIC vector assembly for I386 cleaned up.  The ICU code
	  has been cleaned up to match the APIC code in regards to format
	  and macro availability.  Additionally, the code has been adjusted
	  to deal with deferred interrupts.

	* Deferred interrupts use a per-cpu boolean int_pending, and
	  masks ipending, spending, and fpending.  Being per-cpu variables
	  it is not currently necessary to lock; bus cycles modifying them.

	  Note that the same mechanism will enable preemption to be
	  incorporated as a true software interrupt without having to
	  further hack up the critical nesting code.

	* Note: the old critical_enter() code in kern/kern_switch.c is
	  currently #ifdef to be compatible with both the old and new
	  methodology.  In STAGE-2 it will be moved entirely to MD code.

Performance issues:

	One of the purposes of this commit is to enhance critical section
	performance, specifically to greatly reduce bus overhead to allow
	the critical section code to be used to protect per-cpu caches.
	These caches, such as Jeff's slab allocator work, can potentially
	operate very quickly making the effective savings of the new
	critical section code's performance very significant.

	The second purpose of this commit is to allow architectures to
	enable certain interrupts while in a critical section.  Specifically,
	the intention is to eventually allow certain FAST interrupts to
	operate rather then defer.

	The third purpose of this commit is to begin to clean up the
	critical_enter()/critical_exit()/cpu_critical_enter()/
	cpu_critical_exit() API which currently has serious cross pollution
	in MI code (in fork_exit() and ast() for example).

	The fourth purpose of this commit is to provide a framework that
	allows kernel-preempting software interrupts to be implemented
	cleanly.  This is currently used for two forward interrupts in I386.
	Other architectures will have the choice of using this infrastructure
	or building the functionality directly into critical_enter()/
	critical_exit().

	Finally, this commit is designed to greatly improve the flexibility
	of various architectures to manage critical section handling,
	software interrupts, preemption, and other highly integrated
	architecture-specific details.
2002-02-26 17:06:21 +00:00
Peter Wemm
6bd95d70db Work-in-progress commit syncing up pmap cleanups that I have been working
on for a while:
- fine grained TLB shootdown for SMP on i386
- ranged TLB shootdowns.. eg: specify a range of pages to shoot down with
  a single IPI, since the IPI is very expensive.  Adjust some callers
  that used to trigger this inside tight loops to do a ranged shootdown
  at the end instead.
- PG_G support for SMP on i386 (options ENABLE_PG_G)
- defer PG_G activation till after we decide what we are going to do with
  PSE and the 4MB pages at the start of the kernel.  This should solve
  some rumored strangeness about stale PG_G entries getting stuck
  underneath the 4MB pages.
- add some instrumentation for the fine TLB shootdown
- convert some asm instruction wrappers from functions to inlines.  gcc
  seems to do a fair bit better with this.
- [temporarily!] pessimize the tlb shootdown IPI handlers.  I will fix
  this again shortly.

This has been working fairly well for me for a while, but I have tweaked
it again prior to commit since my last major testing round.  The only
outstanding problem that I know of is PG_G related, which is why there
is an option for it (not on by default for SMP).  I have seen a world
speedups by a few percent (as much as 4 or 5% in one case) but I have
*not* accurately measured this - I am a bit sceptical of these numbers.
2002-02-25 23:49:51 +00:00
Yoshihiro Takahashi
9d139b79d4 - Split the routine to initialize a bus_space_handle into the separate
function.
- Only access a bus_space_handle if the resource type is SYS_RES_MEMORY or
  SYS_RES_IOPORT.
- Add the bus_space_subregion supports.
2002-02-17 09:16:45 +00:00
Yoshihiro Takahashi
65939fef0f Add needed include. 2002-02-10 10:16:22 +00:00
John Baldwin
2deac418f3 Don't grab the ICU lock while reading the current pending interrupts and
current masked interrupts from the AT PIC.

Requested by:	bde
2002-02-08 18:30:36 +00:00
Bruce Evans
586079cc26 Don't include <isa/isavar.h> or compile code depending on it when isa
is not configured.  Including <isa/isavar.h> when it is not used is
harmful as well as bogus, since it includes "isa_if.h" which is not
generated when isa is not configured.

This was fixed in 1999 but was broken by unconditionalizing PNPBIOS.
2002-01-30 12:41:12 +00:00
Bruce Evans
c636c4a872 Removed unused includes. In particular, don't include <isa/isavar.h> since
its only effect is to break the optionality of the isa option.

Sorted includes.
2002-01-30 12:23:49 +00:00
John Baldwin
c86b6ff551 Change the preemption code for software interrupt thread schedules and
mutex releases to not require flags for the cases when preemption is
not allowed:

The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent
switching to a higher priority thread on mutex releease and swi schedule,
respectively when that switch is not safe.  Now that the critical section
API maintains a per-thread nesting count, the kernel can easily check
whether or not it should switch without relying on flags from the
programmer.  This fixes a few bugs in that all current callers of
swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from
fast interrupt handlers and the swi_sched of softclock needed this flag.
Note that to ensure that swi_sched()'s in clock and fast interrupt
handlers do not switch, these handlers have to be explicitly wrapped
in critical_enter/exit pairs.  Presently, just wrapping the handlers is
sufficient, but in the future with the fully preemptive kernel, the
interrupt must be EOI'd before critical_exit() is called.  (critical_exit()
can switch due to a deferred preemption in a fully preemptive kernel.)

I've tested the changes to the interrupt code on i386 and alpha.  I have
not tested ia64, but the interrupt code is almost identical to the alpha
code, so I expect it will work fine.  PowerPC and ARM do not yet have
interrupt code in the tree so they shouldn't be broken.  Sparc64 is
broken, but that's been ok'd by jake and tmm who will be fixing the
interrupt code for sparc64 shortly.

Reviewed by:	peter
Tested on:	i386, alpha
2002-01-05 08:47:13 +00:00
Thomas Moestl
01f1aed259 Use the new resource_list_print_type() function.
Pass the bus device to isa_init() (this is needed for the sparc64
version).
2001-12-21 21:54:56 +00:00
John Baldwin
98f9879242 Introduce a standard name for the lock protecting an interrupt controller
and it's associated state variables: icu_lock with the name "icu".  This
renames the imen_mtx for x86 SMP, but also uses the lock to protect
access to the 8259 PIC on x86 UP.  This also adds an appropriate lock to
the various Alpha chipsets which fixes problems with Alpha SMP machines
dropping interrupts with an SMP kernel.
2001-12-20 23:48:31 +00:00
John Baldwin
7235f2b1e9 Axe stale extern for a non-existent variable. 2001-12-18 22:42:09 +00:00
John Baldwin
7e1f6dfe9d Modify the critical section API as follows:
- The MD functions critical_enter/exit are renamed to start with a cpu_
  prefix.
- MI wrapper functions critical_enter/exit maintain a per-thread nesting
  count and a per-thread critical section saved state set when entering
  a critical section while at nesting level 0 and restored when exiting
  to nesting level 0.  This moves the saved state out of spin mutexes so
  that interlocking spin mutexes works properly.
- Most low-level MD code that used critical_enter/exit now use
  cpu_critical_enter/exit.  MI code such as device drivers and spin
  mutexes use the MI wrappers.  Note that since the MI wrappers store
  the state in the current thread, they do not have any return values or
  arguments.
- mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is
  assigned to curthread->td_savecrit during fork_exit().

Tested on:	i386, alpha
2001-12-18 00:27:18 +00:00
John Baldwin
0bbc882680 Overhaul the per-CPU support a bit:
- The MI portions of struct globaldata have been consolidated into a MI
  struct pcpu.  The MD per-CPU data are specified via a macro defined in
  machine/pcpu.h.  A macro was chosen over a struct mdpcpu so that the
  interface would be cleaner (PCPU_GET(my_md_field) vs.
  PCPU_GET(md.md_my_md_field)).
- All references to globaldata are changed to pcpu instead.  In a UP kernel,
  this data was stored as global variables which is where the original name
  came from.  In an SMP world this data is per-CPU and ideally private to each
  CPU outside of the context of debuggers.  This also included combining
  machine/globaldata.h and machine/globals.h into machine/pcpu.h.
- The pointer to the thread using the FPU on i386 was renamed from
  npxthread to fpcurthread to be identical with other architectures.
- Make the show pcpu ddb command MI with a MD callout to display MD
  fields.
- The globaldata_register() function was renamed to pcpu_init() and now
  init's MI fields of a struct pcpu in addition to registering it with
  the internal array and list.
- A pcpu_destroy() function was added to remove a struct pcpu from the
  internal array and list.

Tested on:	alpha, i386
Reviewed by:	peter, jake
2001-12-11 23:33:44 +00:00
Mitsuru IWASAKI
f9390180fe Some fix for the recent apm module changes.
- Now that apm loadable module can inform its existence to other kernel
   components  (e.g. i386/isa/clock.c:startrtclock()'s TCS hack).
 - Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose.
 - Add simple arbitration mechanism for APM vs. ACPI.  This prevents
   the kernel enables both of them.
 - Remove obsolete `#ifdef DEV_APM' related code.
 - Add abstracted interface for Powermanagement operations.  Public apm(4)
   functions, such as apm_suspend(), should be replaced new interfaces.
   Currently only power_pm_suspend (successor of apm_suspend) is implemented.

Reviewed by:	peter, arch@ and audit@
2001-11-01 16:34:07 +00:00
Luigi Rizzo
c5ca4c7e6e Backout 1.61 -- both intrcnt and intrnames are already exported
via sysctl under "hw".
2001-10-25 01:32:24 +00:00
Bruce Evans
08b00f49c3 MFi386:
- sys/pc98/pc98/npx.c 1.87 (2001/09/15; author: imp)
  I don't think pc98 has acpi at all, so ifdef the acpi attachments for
  now.

This completes merging sys/pc98/pc98/npx.c into sys/i386/isa/npx.c so
that the former can be removed.
2001-10-21 06:05:08 +00:00
Bruce Evans
abfde38316 MFpc98: fundamental differences. The magic numbers for the i/o port
and the irq are different for pc98, and are not very well handled (we
use a historical mess of hard-coded values, values from header files
and values from hints).
2001-10-21 05:56:03 +00:00
Bruce Evans
40d8c8da95 MFpc98: all changes in sys/pc98/pc98/npx.c related to FPU_ERROR_BROKEN.
- 1.58 (2000/09/01; author: kato)
  Fixed FPU_ERROR_BROKEN code.  It had old-isa code.
- 1.33 (1998/03/09; author: kato)
  Make FPU_ERROR_BROKEN a new-style option.
- 1.7 (1996/10/09; author: asami)
  Make sure FPU is recognized for non-Intel CPUs.

The log for rev.1.7 should have said something like:
Added FPU_ERROR_BROKEN option.  This forces a successful probe for
exception 16, so that hardware with a broken FPU error signal can sort
of work.
2001-10-21 05:18:30 +00:00
Bruce Evans
265e95d904 Deleted most of npxprobe(), and merged npxprobe1() back into npxprobe().
Use the normal interrupt handler (npx_intr()) instead of a special
probe-time interrupt handler, although this causes problems due to
the bus_teardown_intr() not actually even tearing down the interrupt
(these problems were avoided by doing interrupt attachment for the
special interrupt handler directly).  Fixed minor bitrot in comments.

The reason for the npxprobe()/npxprobe1() split mostly went away at
about the same time it was made (in 1992 or 1993 just before the
beginning of history).  386BSD ran all probes with interrupts completely
masked, and I didn't want to disturb this when I added an irq probe
to npxprobe().  An irq (not necessarily npx) must be acked for at least
external npx's to take the cpu out of the wait state that it enters
when an npx error occurs, so the probe must be done with a suitable
irq unmasked.  npxprobe() went to great lengths to unmask precisely
the npx irq.

Running probes with all interrupts masked was never really needed in
FreeBSD, since FreeBSD always masked interrupts well enough using
splhigh(), but it wasn't until rev.1.48 (1995/12/12) of autoconf.c
that all probes were run with CPU interrupts enabled.  This permits
npxprobe() to probe its irq using normal interrupt resources.  Note
that most drivers still can't depend on this.  It depends on the
interrupt handler being fast and the irq not being shared.
2001-10-16 14:12:35 +00:00
Bruce Evans
2504f76272 Commit my old fixes for cosmetic bugs in npxprobe() so that they aren't
lost when the buggy code goes away completely:
- don't assume that the npx irq number is >= 8.  Rev.1.73 only reversed
  part of the hard-coding of it to 13 in rev.1.66.
- backed out the part of rev.1.84 that added a highly confused comment
  about an enable_intr() being "highly bogus".  The whole reason for
  existence of npxprobe() (separate from the main probe, npxprobe1())
  is to handle the complications to make this enable_intr() safe.
- backed out the part of rev.1.94 that modified npxprobe().  It mainly
  broke the enable_intr() to restore_intr().  Restoring the interrupt
  state in a nested way is precisely what is not wanted here.  It was
  harmless in practice because npxprobe() is called with interrupts
  enabled, so restoring the interrupt state enables interrupts.  Most
  of npxprobe() is a no-op for the same reason...
2001-10-16 12:55:38 +00:00
Tor Egge
4c8f0aced5 Explicitly initialize the fpu when SSE is enabled since this no
longer happens as a side effect of calling npxsave.

Reviewed by:	peter, bde
2001-10-15 20:18:06 +00:00
John Baldwin
7106ca0d1a Add missing includes of sys/lock.h. 2001-10-11 17:52:20 +00:00
Ian Dowse
3c7bcedd06 Remove the Xresume* labels from the i386 interrupt handlers; the
code in ipl.s and icu_ipl.s that used them was removed when the
interrupt thread system was committed. Debuggers also knew about
Xresume* because these labels hide the real names of the interrupt
handlers (Xintr*), and debuggers need to special-case interrupt
handlers to get the interrupt frame.

Both gdb and ddb will now use the Xintr* and Xfastintr* symbols to
detect interrupt frames. Fast interrupt frames were never identified
correctly before, so this fixes the problem of the running stack
frame getting lost in a ddb or gdb trace generated from a fast
interrupt - e.g. when debugging a simple infinite loop in the kernel
using a serial console, the frame containing the loop would never
appear in a gdb or ddb trace.

Reviewed by:	jhb, bde
2001-10-09 19:54:52 +00:00
Robert Drehmel
1e8ff53804 Remove an unneeded variable declaration and statement.
Approved by:	jake
2001-10-09 16:06:28 +00:00
Luigi Rizzo
7d4b046991 Export interrupt statistics via sysctl.
MFC-after: 3 days
2001-10-07 17:03:56 +00:00
Yoshihiro Takahashi
f2eeb19063 Rewrite the pc98 bus_space stuff.
The type of bus_space_tag_t is now a pointer to bus_space_tag structure,
and the bus_space_tag structure saves pointers to functions for direct
access and relocate access.

Added bsh_bam member to the bus_space_handle structure, it saves access
method either direct access or relocate access which is called by
bus_space_* functions.

Added the mecia device support. If the bs_da and bs_ra in bus tag are set
NEPC_io_space_tag and NEPC_mem_space_tag respectively, new bus_space stuff
changes the register of mecia automatically for 16bit access.

Obtained from:	NetBSD/pc98
2001-10-07 10:04:18 +00:00
John Baldwin
bf2965ed32 Disable the check in icu_setup() to see if a handler was already used as
the current interrupt thread routines will guarantee the condition this is
checking for at a higher level but inthand_add() and inthand_remove() as
they currently exist don't satisfy this condition.  (Which does need to be
fixed but which will take a bit more work.)  This fixes shared interrupts.
2001-09-27 19:03:52 +00:00
Jonathan Lemon
fe16674a74 Return EINVAL if the passed intr is out of bounds.
PR: 30857
Submitted by: David Xu <davidx@viasoft.com.cn>
MFC: 1 week
2001-09-27 02:46:47 +00:00
John Baldwin
659209e636 Whitespace fixes. 2001-09-18 21:05:04 +00:00