This header can be easily updated using the new "gen-drm_pciids" script,
available in tools/tools/drm. The script uses the Linux' drm_pciids.h
header for new IDs, the FreeBSD's one because we add the name of the
device to each IDs, and the PCI IDs database (misc/pciids port) to fill
this name automatically for new IDS.
To call the script:
tools/tools/drm/gen-drm_pciids \
/path/to/linux/drm_pciids.h \
/path/to/freebsd/drm_pciids.h \
/path/to/pciids/pci.ids
external mbuf buffer management capabilities in the future.
For now only EXT_FREE_OK is defined with current legacy behavior.
Sponsored by: The FreeBSD Foundation
Author: Shirish S <s.shirish@samsung.com>
Date: Thu Aug 30 07:04:06 2012 +0000
drm: edid: add support for E-DDC
The current logic for probing ddc is limited to
2 blocks (256 bytes), this patch adds support
for the 4 block (512) data.
To do this, a single 8-bit segment index is
passed to the display via the I2C address 30h.
Data from the selected segment is then immediately
read via the regular DDC2 address using a repeated
I2C 'START' signal.
Signed-off-by: Shirish S <s.shirish@samsung.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
bridge Xeon.
Summary: These are PEBS events but they're also available as normal
counter/sample events. The source table (Table 19-2) lists the
base versions (LOAD, STLB_MISS, SPLIT, ALL) but it says they must
be qualified with other values. This particular commit fleshes
out those umask values.
Source:
* Linux; SDM June 2013, Volume 3B, Table 19-2 and 18-21.
Tested:
* Sandy Bridge (non-Xeon)
The iic_dp_aux_detach callback is therefore useless: it's replaced by
bus_generic_detach. This fixes a "General protection fault" panic during
second (incorrect) deletion of the child.
Tested by: kwm@
Reviewed by: ray@
kld_unload event handler which gets invoked after a linker file has been
successfully unloaded. The kld_unload and kld_load event handlers are now
invoked with the shared linker lock held, while kld_unload_try is invoked
with the lock exclusively held.
Convert hwpmc(4) to use these event handlers instead of having
kern_kldload() and kern_kldunload() invoke hwpmc(4) hooks whenever files are
loaded or unloaded. This has no functional effect, but simplifes the linker
code somewhat.
Reviewed by: jhb
breaks the "2step" feature of the driver, e.g. in order to read 360
KiB media on a 1200 KiB drive.
As the only potential advantage of implied (vs. explicit) seeks is to
minimize the software effort, yet our driver always contained the
logic needed for explicit seeks, simply dropping implied seeks is the
best solution without introducing risks for new bugs. There is no
performance penalty, reading a 1440 KiB medium takes exactly the same
time with both, implied or explicit seeks.
MFC after: 1 week
features. The changes in particular are:
o Remove rarely used "header" pointer and replace it with a 64bit protocol/
layer specific union PH_loc for local use. Protocols can flexibly overlay
their own 8 to 64 bit fields to store information while the packet is
worked on.
o Mechanically convert IP reassembly, IGMP/MLD and ATM to use pkthdr.PH_loc
instead of pkthdr.header.
o Extend csum_flags to 64bits to allow for additional future offload
information to be carried (e.g. iSCSI, IPsec offload, and others).
o Move the RSS hash type enumerator from abusing m_flags to its own 8bit
rsstype field. Adjust accessor macros.
o Add cosqos field to store Class of Service / Quality of Service information
with the packet. It is not yet supported in any drivers but allows us to
get on par with Cisco/Juniper in routing applications (plus MPLS QoS) with
a modernized ALTQ.
o Add four 8 bit fields l[2-5]hlen to store the relative header offsets
from the start of the packet. This is important for various offload
capabilities and to relieve the drivers from having to parse the packet
and protocol headers to find out location of checksums and other
information. Header parsing in drivers is a lot of copy-paste and
unhandled corner cases which we want to avoid.
o Add another flexible 64bit union to map various additional persistent
packet information, like ether_vtag, tso_segsz and csum fields.
Depending on the csum_flags settings some fields may have different usage
making it very flexible and adaptable to future capabilities.
o Restructure the CSUM flags to better signify their outbound (down the
stack) and inbound (up the stack) use. The CSUM flags used to be a bit
chaotic and rather poorly documented leading to incorrect use in many
places. Bring clarity into their use through better naming.
Compatibility mappings are provided to preserve the API. The drivers
can be corrected one by one and MFC'd without issue.
o The size of pkthdr stays the same at 48/56bytes (32/64bit architectures).
Sponsored by: The FreeBSD Foundation
free function access to the mbuf the external memory was attached
to.
Mechanically adjust all users to include the mbuf parameter.
This fixes a long standing annoyance for external free functions.
Before one had to sacrifice one of the argument pointers for this.
Sponsored by: The FreeBSD Foundation
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jun 4 18:39:20 2012 +0200
drm/i915: adjusted_mode->clock in the dp mode_fixup
... instead of changing mode->clock, which we should leave as-is.
After the previous patch we only touch that if it's a panel, and then
adjusted mode->clock equals adjusted_mode->clock. Outside of
intel_dp.c we only use ajusted_mode->clock in the mode_set functions.
Within intel_dp.c we only use it to calculate the dp dithering
and link bw parameters, so that's the only thing we need to fix
up.
As a temporary ugliness (until the cleanup in the next patch) we
pass the adjusted_mode into dp_dither for both parameters (because
that one still looks at mode->clock).
Note that we do overwrite adjusted_mode->clock with the selected dp
link clock, but that only happens after we've calculated everything we
need based on the dotclock of the adjusted output configuration.
Outside of intel_dp.c only intel_display.c uses adjusted_mode->clock,
and that stays the same after this patch (still equals the selected dp
link clock). intel_display.c also needs the actual dotclock (as
target_clock), but that has been fixed up in the previous patch.
v2: Adjust the debug message to also use adjusted_mode->clock.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
xpt_rescan() expects the SIM lock to be held, and we trip a mtx_assert if
the driver initiates multiple rescans in quick succession.
Reported by: sbruno
Tested by: sbruno
MFC after: 1 week
mode. We don't know why it failed, so we can't know that a retry will
also fail (the low-level driver might have reset the controller state
machine or something similar that would allow a retry to work).
(sys/dev/iscsi_initiator/ instead of sys/dev/iscsi/initiator/), to make
room for the new one. This is also more logical location (kernel module
being named iscsi_initiator.ko, for example). There is no ongoing work
on this I know of, so it shouldn't make life harder for anyone.
There are no functional changes, apart from "svn mv" and adjusting paths.
The flag was mandatory since r209792, where vm_page_grab(9) was
changed to only support the alloc retry semantic.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
manifested itself in out of chain frame conditions.
When the driver ran out of chain frames, the request in question
would get completed early, and go through mpssas_scsiio_complete().
In mpssas_scsiio_complete(), the negation of the CAM status values
(CAM_STATUS_MASK | CAM_SIM_QUEUED) was ORed in instead of being
ANDed in. This resulted in a bogus CAM CCB status value. This
didn't show up in the non-error case, because the status was reset
to something valid (e.g. CAM_REQ_CMP) later on in the function.
But in the error case, such as when the driver ran out of chain
frames, the CAM_REQUEUE_REQ status was ORed in to the bogus status
value. This led to the CAM transport layer repeatedly releasing
the SIM queue, because it though that the CAM_RELEASE_SIMQ flag had
been set. The symptom was messages like this on the console when
INVARIANTS were enabled:
xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0
mps_sas.c: In mpssas_scsiio_complete(), use &= to take status
bits out. |= adds them in.
In the error case in mpssas_scsiio_complete(), set
the status to CAM_REQUEUE_REQ, don't OR it in.
MFC after: 3 days
Sponsored by: Spectra Logic
The TI uart hardware is ns16550-compatible, except that before it can
be used the clocks and power have to be enabled and a non-standard
mode control register has to be set to put the device in uart mode
(as opposed to irDa or other serial protocols). This adds the extra
code in an extension to the standard ns8250 probe routine, and the
rest of the driver is just the standard ns8250 code.
This makes it easier to implement new drivers which are "mostly ns8250"
but with some small difference such as needing to enable clocks or poke
a non-standard register at probe or attach time.
device compatible with multiple drivers matches the more specific driver
first and doesn't overwrite it later with the more generic. Move the
generic ns16550 to the end of the list.
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.
This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.
This initial incarnation lacks DMA support (coming soon). Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
