that the driver clock is identical to the processor or bus clock.
This is the case for the PowerQUICC processor. When the clock is
high enough, overflows happen in the calculation of the time it
takes to send 1/10 of a character, used in delay loops. Fix the
overflows so as to fix bugs in the delay loops that can cause either
insufficient delays or excessive delays.
system devices (i.e. console, debug port or keyboard), don't stop
after the first match. Find them all and keep track of the last.
The reason for this change is that the low-level console is always
added to the list of system devices first, with other devices added
later. Since new devices are added to the list at the head, we have
the console always at the end. When a debug port is using the same
UART as the console, we would previously mark the "newbus" UART as
a debug port instead of as a console. This would later result in a
panic because no "newbus" device was associated with the console.
By matching all possible system devices we would mark the "newbus"
UART as a console and not as a debug port.
While it is arguably better to be able to mark a "newbus" UART as
both console and debug port, this fix is lightweight and allows
a single UART to be used as the console as well as a debug port
with only the aesthetic bug of not telling the user about it also
being a debug port.
Now that we match all possible system devices, update the rclk of
the system devices with the rclk that was obtained through the
bus attachment. It is generally true that clock information is
more reliable when obtained from the parent bus than by means of
some hardcoded or assumed value used early in the boot. This by
virtue of having more context information.
MFC after: 1 month
by driver backends to mark individual channels as enabled or not.
The default implementation of this method always mark channels as
enabled.
This method is currently not used, but is added with the PowerQUICC
in mind where the 2nd SCC channel can be disabled.
watchdog might hide the succesful arming of an earlier one. Accept that on
failing to arm any watchdog (because of non-supported timeouts) EOPNOTSUPP is
returned instead of the more appropriate EINVAL.
MFC after: 3 days
When submitting rx buffers and not using WC fifo, always replace the
invalid DMA address with the real one, otherwise allocation failures
could lead to the invalid DMA address being given to the NIC, and
that would cause the receive side to lockup.
it via pci_get_vpd_*() rather than always reading it for each device during
boot. I've left the tunable so that it can still be turned off if a device
driver causes a lockup via a query to a broken device, but devices whose
drivers do not use VPD (the vast majority) should no longer result in
lockups during boot, and most folks should not need to tweak the tunable
now.
Tested on: bge(4)
Silence from: jmg
one (hardware & global lock). This should address witness complaints that
a duplicate mutex is being acquired. Be sure to free the mutex to fix a
potential memory leak.
MFC after: 3 days
some devices (and not others). To get instances onto the iicbus, one
now needs hints or an identify routine. We also do not probe the bus
for devices because many iic devices cannot be safely probed (and when
they can, the probe order turns out to be somewhat difficult to get
right).
# I'm not 100% sure that the iicsmb removal is right. Please contact me if
# this causes difficulty.
- Change exca_activate_resource() to call BUS_ACTIVATE_RESOURCE() before
calling exca_(io|mem)_map() since the latter use rman_get_bus(tag|handle)
and the recent changes to nexus(4) mean that you need to activate a
resource before reading the bus tag and handle. This was true before,
but now the nexus(4) drivers on x86 and ia64 are more forceful about it.
Reviewed by: imp
DMA memory for a firmware load if it was the exact size needed, thus in the
common case the driver was constantly free'ing and reallocating the DMA
buffer and it would eventually begin to fail. With this fix, iwi0 reuses
the same buffer the entire time and no longer fails to load the firmware
after the machine has been up for a while.
MFC after: 1 week
simpler. It now can just use rman_is_region_manager() during
acpi_release_resource() to see if the the resource is suballocated from
a system resource. Also, the driver no longer needs MD knowledge about
how to setup bus space tags and handles when doing a suballocation, but
can simply rely on bus_activate_resource() in the parent setting all that
up.
o make all crypto drivers have a device_t; pseudo drivers like the s/w
crypto driver synthesize one
o change the api between the crypto subsystem and drivers to use kobj;
cryptodev_if.m defines this api
o use the fact that all crypto drivers now have a device_t to add support
for specifying which of several potential devices to use when doing
crypto operations
o add new ioctls that allow user apps to select a specific crypto device
to use (previous ioctls maintained for compatibility)
o overhaul crypto subsystem code to eliminate lots of cruft and hide
implementation details from drivers
o bring in numerous fixes from Michale Richardson/hifn; mostly for
795x parts
o add an optional mechanism for mmap'ing the hifn 795x public key h/w
to user space for use by openssl (not enabled by default)
o update crypto test tools to use new ioctl's and add cmd line options
to specify a device to use for tests
These changes will also enable much future work on improving the core
crypto subsystem; including proper load balancing and interposing code
between the core and drivers to dispatch small operations to the s/w
driver as appropriate.
These changes were instigated by the work of Michael Richardson.
Reviewed by: pjd
Approved by: re
(with the notable exception of improvements for using multiple TX queues)
This adds support for the T3B2 ASIC rev
Obtained from: Chelsio
MFC after: 3 days
on amd64 and i386) until we gain proper BUS_DMA_NOCACHE support.
(in progress).
Tested by: rafan, infofarmer, Nguyen Tam Chinh <unixvn@gmail.com>
Tested on: amd64, i386
- don't acquire port lock, already held in ioctl
- rename to cxgb_stop_locked
- switch callout_drain to callout_stop to avoid a hang from having the port lock held
cause the EC to stop handling future events because the GPE stayed masked.
Set a flag when queueing a GPE handler since it will ultimately re-enable
the GPE. In all other cases, re-enable it ourselves. I reworked the
patch from the submitter.
Submitted by: Rong-en Fan <grafan@gmail.com>
is okay for most of the chipsets but BCM5701 PHY does not seem to like it.
Set media to IFM_NONE if link is not up instead of the previous value.
Reported by: Goran Lowkrantz (goran dot lowkrantz at ismobile dot com)
