Address. Although KAME implementation used FF02:0:0:0:0:2::/96 based on
older versions of draft-ietf-ipngwg-icmp-name-lookup, it has been changed
in RFC 4620.
The kernel always joins the /104-prefixed address, and additionally does
/96-prefixed one only when net.inet6.icmp6.nodeinfo_oldmcprefix=1.
The default value of the sysctl is 1.
ping6(8) -N flag now uses /104-prefixed one. When this flag is specified
twice, it uses /96-prefixed one instead.
Reviewed by: ume
Based on work by: Thomas Scheffler
PR: conf/174957
MFC after: 2 weeks
all interested parties in case if interface flag IFF_UP has changed.
However, not only SIOCSIFFLAGS can raise the flag, but SIOCAIFADDR
and SIOCAIFADDR_IN6 can, too. The actual |= is done not in the protocol
code, but in code of interface drivers. To fix this historical layering
violation, we will check whether ifp->if_ioctl(SIOCSIFADDR) raised the
IFF_UP flag, and if it did, run the if_up() handler.
This fixes configuring an address under CARP control on an interface
that was initially !IFF_UP.
P.S. I intentionally omitted handling the IFF_SMART flag. This flag was
never ever used in any driver since it was introduced, and since it
means another layering violation, it should be garbage collected instead
of pretended to be supported.
For now use 256 buckets and fnv_hash function. Use xor'ed 32-bit
s6_addr32 parts of in6_addr structure as a hash key. Update
in6_localip and in6_is_addr_deprecated to use hash table for fastest
lookup.
Sponsored by: Yandex LLC
Discussed with: dwmalone, glebius, bz
- Deembed scope id in L3 address in in6_lltable_dump().
- Simplify scope id recovery in rtsock routines.
- Remove embedded scope id handling in ndp(8) and route(8) completely.
llentry_free() and arptimer():
o Use callout_init_rw() for lle timeout, this allows us safely
disestablish them.
- This allows us to simplify the arptimer() and make it
race safe.
o Consistently use ifp->if_afdata_lock to lock access to
linked lists in the lle hashes.
o Introduce new lle flag LLE_LINKED, which marks an entry that
is attached to the hash.
- Use LLE_LINKED to avoid double unlinking via consequent
calls to llentry_free().
- Mark lle with LLE_DELETED via |= operation istead of =,
so that other flags won't be lost.
o Make LLE_ADDREF(), LLE_REMREF() and LLE_FREE_LOCKED() more
consistent and provide more informative KASSERTs.
The patch is a collaborative work of all submitters and myself.
PR: kern/165863
Submitted by: Andrey Zonov <andrey zonov.org>
Submitted by: Ryan Stone <rysto32 gmail.com>
Submitted by: Eric van Gyzen <eric_van_gyzen dell.com>
Possibly do some entra work in case we would not get into the
ifa0 != NULL paths later as we already do for the mltaddr before.
XXX We should possibly error in case in6_setscope fails.
Reference: http://lists.freebsd.org/pipermail/freebsd-net/2011-September/029829.html
Submitted by: bz
MFC after: 1 week
at which the lle_tbl pointer points to freed memory and the llt_free pointer is no longer
valid.
Move the free pointer in to the llentry itself and update the initalization sites.
MFC after: 2 weeks
the original IPv4 implementation from r178888:
- Use RT_DEFAULT_FIB in the IPv4 implementation where noticed.
- Use rt*fib() KPI with explicit RT_DEFAULT_FIB where applicable in
the NFS code.
- Use the new in6_rt* KPI in TCP, gif(4), and the IPv6 network stack
where applicable.
- Split in6_rtqtimo() and in6_mtutimo() as done in IPv4 and equally
prevent multiple initializations of callouts in in6_inithead().
- Use wrapper functions where needed to preserve the current KPI to
ease MFCs. Use BURN_BRIDGES to indicate expected future cleanup.
- Fix (related) comments (both technical or style).
- Convert to rtinit() where applicable and only use custom loops where
currently not possible otherwise.
- Multicast group, most neighbor discovery address actions and faith(4)
are locked to the default FIB. Individual IPv6 addresses will only
appear in the default FIB, however redirect information and prefixes
of connected subnets are automatically propagated to all FIBs by
default (mimicking IPv4 behavior as closely as possible).
Sponsored by: Cisco Systems, Inc.
of the SIOC[DG]LIFADDR icotls before dropping the IF_ADDR_LOCK() and
release the reference after using it. This prevents the address from
being potentially freed out from under the ioctl handler.
Reviewed by: bz
MFC after: 1 week
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.
The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.
ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.
To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]
The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.
Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!
PR: kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by: bz
Submitted by: bz [1]
after its installation. This removal may be accidental and can
prevent the default route from being installed in the future if
the associated default router has the best preference. The cause
is the lack of status update in the default router on the state
of its route installation in the kernel FIB. This patch fixes
the described problem.
Reviewed by: hrs, discussed with hrs
MFC after: 5 days
inlined by Qing Li in his big new-ARP commit. I am going to utilize
them in my newcarp work, and also these functions left declared
in in6_var.h for all the time they were absent.
Reviewed by: bz
determine if a loopback route should be installed for an interface
IPv6 address. Another condition is the address must not belong to a
looopback interface.
Reviewed by: hrs
MFC after: 3 days
people think: returning true for an address in any connected subnet, not
necessarily on the local machine.
Sponsored by: Sandvine Incorporated
MFC after: 2 weeks
Approved by: re (kib)
same as the host address. This already works fine for INET6 and ND6.
While here, remove two function pointers from struct lltable which are
only initialized but never used.
MFC after: 3 days
an explicit action for INET6 configuration happens. The changes are:
1. When an ND6 flag is changed via SIOCSIFINFO_FLAGS ioctl,
setting ND6_IFF_ACCEPT_RTADV and/or ND6_IFF_AUTO_LINKLOCAL now triggers
an attempt to clear the ND6_IFF_IFDISABLED flag.
2. When an AF_INET6 address is added successfully to an interface and
it is marked as ND6_IFF_IFDISABLED, an attempt to clear the
ND6_IFF_IFDISABLED happens.
This simplifies ND6_IFF_IFDISABLED flag manipulation by users via ifconfig(8);
in most cases manual configuration is no longer needed.
- When ND6_IFF_AUTO_LINKLOCAL is set and no link-local address is assigned to
an interface, SIOCSIFINFO_FLAGS ioctl now calls in6_ifattach() to configure
a link-local address.
This change ensures link-local address configuration when "ifconfig IF inet6"
command is invoked. For example, "ifconfig IF inet6 auto_linklocal" now
always try to configure an LL addr even if ND6_IFF_AUTO_LINKLOCAL is already
set to 1 (i.e. down/up cycle is no longer needed).
Reviewed by: bz
interface is brought down, even though the interface address is still
valid. This patch maintains the permanent ARP entries as long as the
interface address (having the same prefix as that of the ARP entries)
is valid.
Reviewed by: delphij
MFC after: 5 days
Call the handler function with the lock held, return unlocked as we
might free the entry. Rework functions later in the call graph to be
either called with the lock held or, only if needed, unlocked.
Place asserts to document and tighten assumptions on various lle locking,
which were not always true before.
We call nd6_ns_output() unlocked and the assignment of ip6->ip6_src was
decentralized to minimize possible complexity introduced with the formerly
missing locking there. This also resulted in a push down of local
variable scopes into smaller blocks.
Reported by: many
PR: kern/148857
Submitted by: Dmitrij Tejblum (tejblum yandex-team.ru) (original version)
MFC After: 4 days
We do not respect rules 3 and 4 in the required list:
1. omit leading zeros
2. "::" used to their maximum extent whenever possible
3. "::" used where shortens address the most
4. "::" used in the former part in case of a tie breaker
5. do not shorten one 16 bit 0 field
6. use lower case
http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-04.html
Submitted by: Kalluru Abhiram @ Juniper Networks
Obtained from: Juniper Networks
Reviewed by: hrs, dougb
prevented the link-layer entry from being freed.
In both in.c and in6.c (though that code path seems to be basically dead)
plug a reference leak in case of a pending callout being drained.
In if_ether.c consistently add a reference before resetting the callout
and in case we canceled a pending one remove the reference for that.
In the final case in arptimer, before freeing the expired entry, remove
the reference again and explicitly call callout_stop() to clear the active
flag.
In nd6.c:nd6_free() we are only ever called from the callout function and
thus need to remove the reference there as well before calling into
llentry_free().
In if_llatbl.c when freeing entire tables make sure that in case we cancel
a pending callout to remove the reference as well.
Reviewed by: qingli (earlier version)
MFC after: 10 days
Problem observed, patch tested by: simon on ipv6gw.f.o,
Christian Kratzer (ck cksoft.de),
Evgenii Davidov (dado korolev-net.ru)
PR: kern/144564
Configurations still affected: with options FLOWTABLE
IFF_POINTOPOINT link types. The reason was due to the routing
entry returned from the kernel covering the remote end is of an
interface type that does not support ARP. This patch fixes this
problem by providing a hint to the kernel routing code, which
indicates the prefix route instead of the PPP host route should
be returned to the caller. Since a host route to the local end
point is also added into the routing table, and there could be
multiple such instantiations due to multiple PPP links can be
created with the same local end IP address, this patch also fixes
the loopback route installation failure problem observed prior to
this patch. The reference count of loopback route to local end would
be either incremented or decremented. The first instantiation would
create the entry and the last removal would delete the route entry.
MFC after: 5 days
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.
Reviewed by: bz
MFC after: immediately
automatic link-local address configuration:
- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
global knob. The default value of the sysctl is 0.
- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
sysctl net.inet6.ip6.auto_linklocal to one for its default
value. The default value of the sysctl is 1.
- Make ND6_IFF_IFDISABLED more robust. It can be used to disable
IPv6 functionality of an interface now.
- Receiving RA is allowed if ip6_forwarding==0 *and*
ND6_IFF_ACCEPT_RTADV is set on that interface. The former
condition will be revisited later to support a "host + router" box
like IPv6 CPE router. The current behavior is compatible with
the older releases of FreeBSD.
- The ifconfig(8) now supports these ND6 flags as well as "nud",
"prefer_source", and "disabled" in ndp(8). The ndp(8) now
supports "auto_linklocal".
Discussed with: bz and jinmei
Reviewed by: bz
MFC after: 3 days
- Interface link-local address is not reachable within the
node that owns the interface, this is due to the mismatch
in address scope as the result of the installed interface
address loopback route. Therefore for each interface
address loopback route, the rt_gateway field (of AF_LINK
type) will be used to track which interface a given
address belongs to. This will aid the address source to
use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
only for validation reason. Doing so will eliminate as much
of the special case (loopback addresses) handling code
as possible, however, these empty nd6 entries should not
be returned to the userland applications such as the
"ndp" command.
Since both of the above issues contain common files, these
files are committed together.
Reviewed by: bz
MFC after: immediately
list/index locks, to protect link layer address tables. This avoids
lock order issues during interface teardown, but maintains the bug that
sysctl copy routines may be called while a non-sleepable lock is held.
Reviewed by: bz, kmacy
MFC after: 3 days
