Commit Graph

19 Commits

Author SHA1 Message Date
Marius Strobl
848e30ff51 s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention
of kobj(9) from device drivers.
2011-11-22 21:55:40 +00:00
Marius Strobl
bda8e754a1 Make sparc64 compatible with NEW_PCIB and enable it:
- Implement bus_adjust_resource() methods as far as necessary and in non-PCI
  bridge drivers as far as feasible without rototilling them.
- As NEW_PCIB does a layering violation by activating resources at layers
  above pci(4) without previously bubbling up their allocation there, move
  the assignment of bus tags and handles from the bus_alloc_resource() to
  the bus_activate_resource() methods like at least the other NEW_PCIB
  enabled architectures do. This is somewhat unfortunate as previously
  sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY
  resources should be mapped into KVA, which is only necessary if their
  going to be accessed via the pointer returned from rman_get_virtual() but
  not for bus_space(9) as the later always uses physical access on sparc64.
  Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver
  also may deliberately not map them in if the firmware already has done so,
  possibly in a special way. So in order to still allow a driver to decide
  whether a SYS_RES_MEMORY resource should be mapped into KVA we let it
  indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as
  actually documented in the bus_space(9) page. This is implemented by
  allocating a separate bus tag per SYS_RES_MEMORY resource and passing the
  resource via the previously unused bus tag cookie so we later on can call
  rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now
  also allows to actually indicate that a SYS_RES_MEMORY resource should be
  mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and
  BUS_SPACE_MAP_READONLY respectively.
- Do some minor cleanup like taking advantage of rman_init_from_resource(),
  factor out the common part of bus tag allocation into a newly added
  sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace
  some homegrown versions with the generic counterparts etc.
- While at it, let apb_attach() (which can't use the generic NEW_PCIB code
  as APB bridges just don't have the base and limit registers implemented)
  regarding the config space registers cached in pcib_softc and the SYSCTL
  reporting nodes set up.
2011-10-02 23:22:38 +00:00
Marius Strobl
1bba41a506 Enroll these drivers in multipass probing. The motivation behind this
is that the JBus to EBus bridges share the interrupt controller of a
sibling JBus to PCIe bridge (at least as far as the OFW device tree
is concerned, in reality they are part of the same chip) so we have to
probe and attach the latter first. That happens to be also the case
due to the fact that the JBus to PCIe bridges appear first in the OFW
device tree but it doesn't hurt to ensure the right order.
2009-12-22 21:02:46 +00:00
Marius Strobl
75b02cac5a Provide and consume missing module dependency information. 2009-12-21 21:29:16 +00:00
Marius Strobl
f449699d53 Hook up the generic OFW pnpinfo string method. 2009-03-19 21:14:45 +00:00
Marius Strobl
b66196f2e9 - Sort device methods.
- Take advantage of KOBJMETHOD_END.
2009-03-19 20:31:55 +00:00
Marius Strobl
47c657e929 - Provide and consume module dependency information.
- Fix whitespace bugs.

MFC after:	3 days
2008-08-23 16:07:20 +00:00
Marius Strobl
33368e9fe8 Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
  respective device drivers don't need to figure them out of OFW
  themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
  using IVARs for supplying the OFW node and the subset of standard
  properties of its children. Together with the previous change this
  also allows to fully take advantage of newbus in that drivers like
  fhc(4), which attach on multiple parent busses, no longer require
  different bus front-ends as obtaining the OFW node and properties
  as well as resource allocation works the same for all supported
  busses. As such this change also is part 4/4 of allowing creator(4)
  to work in USIII-based machines as it allows this driver to attach
  on both nexus(4) and upa(4). On the other hand removing these IVARs
  breaks API compatibility with the powerpc nexus(4) but which isn't
  that bad as a) sparc64 currently doesn't share any device driver
  hanging off of nexus(4) with powerpc and b) they were no longer
  compatible regarding OFW-related extensions at the pci(4) level
  since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
  order to handle DMA tags in a hierarchical way and get rid of the
  sparc64_root_dma_tag kludge. Together with the previous two items
  this changes also allows to completely get rid of the nexus(4)
  IVAR interface. It also includes:
  - pushing the constraints previously specified by the nexus_dmatag
    down into the DMA tags of psycho(4) and sbus(4) as it's their
    IOMMUs which induce these restrictions (and nothing at the
    nexus(4) or anything that would warrant specifying them there),
  - fixing some obviously wrong constraints of the psycho(4) and
    sbus(4) DMA tags, which happened to not actually be used with
    the sparc64_root_dma_tag kludge in place and therefore didn't
    cause problems so far,
  - replacing magic constants for constraints with macros as far
    as it is obvious as to where they come from.
  This doesn't include taking advantage of the newbus way to get
  the parent DMA tags implemented by this change in order to divorce
  the IOTSBs of the PCI and SBus IOMMUs or for implementing the
  workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
  yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
  by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
  from ofw_upa.h) and renaming its content, which actually applies to
  all of Fireplane/Safari, JBus and UPA (in the host bus case), as
  appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
  allocating the device info for the children of nexus(4). This is
  done in order to not need to export M_NEXUS when deriving drivers
  for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
  we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
  as add 'associations' and 'rsc', which are pseudo-devices without
  resources and therefore of no real interest for nexus(4), to the
  former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
  space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
  Fireplane/Safari- and JBus-based machines use multiple ranges,
  which can't be as easily divided as in the case of UPA (limiting
  the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
  for children of nexus(4) in order to give one less opportunity
  for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
  change them to take advantage of rman_get_rid() instead of caching
  the RIDs assigned to allocated resources, now that the RIDs of
  resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
  actually became outdated in several places, in panic strings and
  status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
  sbus(4) as I changed considerable amounts of these drivers as well
  as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.

Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.

PR:		76052 [1]
Approved by:	re (kensmith)
2007-03-07 21:13:51 +00:00
Marius Strobl
aa3ee926a9 - Register the generic implementations for the device shutdown, suspend
and resume methods so these events propagate through the device driver
  hierarchy.
- In dma(4) enable the chaining of the DMA engine interrupt handler for
  the LANCE devices via a dma_setup_intr(). This was commented out before
  as I was unsure whether I'd use it but this is probably cleaner than
  fiddling with the DMA engine interrupt in the LANCE driver directly.
- In ebus_setup_dinfo() free 'intrs' instead of 'reg' twice in case
  setting up a child fails due to routing one of its interrupts fails. [1]

Found by:	Coverity Prevent [1]
MFC after:	3 days
2006-01-26 21:14:32 +00:00
Marius Strobl
2c5bc54014 Remove unused sc_node from softc. 2005-12-03 18:14:47 +00:00
Marius Strobl
a1a074b6b3 - Convert these bus drivers to make use of the newly introduced set of
ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order
  to reduce code duplication.
- While here sync the various sparc64 bus drivers a bit (handle failure
  to attach a child gracefully instead of panicing, move the printing
  of child resources common to bus_print_child() and bus_probe_nomatch()
  implementations of a bus into a <bus>_print_res() function, ...) and
  fix some minor bugs and nits (plug memory leaks present when attaching
  a bus or child device fails, remove unused struct members, ...).

Additional testing by:	kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
Marius Strobl
6283ced1e2 - Add suport for the bus_get_resource() device interface method to
central(4) and fhc(4) by using bus_generic_rl_get_resource().
- Remove some superfluous breaks in central.c
2005-05-19 15:09:56 +00:00
Marius Strobl
7e51ba980a - Add a device interface method for bus_get_resource_list() and use
bus_generic_rl_release_resource() for the bus_release_resource() method
  instead of a local copy.
- Correctly handle pass-through allocations in central_alloc_resource().
2005-03-19 00:47:02 +00:00
Marius Strobl
98c4649792 Let central(4) manage the resources of its children so they don't need
to fiddle with OFW themselves.

Thanks to:	joerg for providing access to an E3500
2005-03-04 22:21:11 +00:00
Marius Strobl
30e5ca5340 Minor changes:
- Use FBSDID.
- Remove an unused include.
- Use auto-generated typedefs for the prototypes of the device interface
  functions.
- Terminate the output of device_printf(9) with a newline char.
- Honour the return value of malloc(3).

MFC after:	1 month
2005-03-04 15:17:05 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Poul-Henning Kamp
fd360128ff Add missing <sys/module.h> instances which were shadowed by the nested
include in <sys/kernel.h>
2004-06-03 05:58:30 +00:00
Jake Burkholder
a5902eaf0c Use M_WAITOK. 2003-02-19 17:25:58 +00:00
Jake Burkholder
012d9539bf Add drivers for the central and fhc busses found in enterprise class
UltraSPARCs, and an eeprom attachment for fhc, which allows the date
to be set properly on these machines.  Central is a wierd bus which
seems to only ever have 1 fhc attached to it.   FHC (FireHose Controller)
is another wierd bus with various things on it depending where its attached.
The fhc attached to central has eeprom and zs, and the fhcs which attach
directly to nexus have simm-status, environment and other nodes, none of
which I'll probably ever have documentation for.

Thanks to Ade Lovett for providing access to an 8 cpu e4500.
2003-02-18 09:01:01 +00:00