Commit Graph

2328 Commits

Author SHA1 Message Date
Jung-uk Kim
08945e887f Move SiS 760 to where it belongs.
PR:		98094
Submitted by:	Mike M < mmcgus at yahoo dot com >
2006-05-30 18:41:26 +00:00
Gleb Smirnoff
16a67f532d Rename device name in the last commit. According to PR, the ID is
more likely to belong to chips of 8168 family.

PR:		kern/96734
Submitted by:	Sven Petai <hadara bsd.ee>
2006-05-24 11:55:25 +00:00
Eric Anholt
b78e627466 Add support for allocating one larger than page-sized contiguous block of memory
with a physical address.  This is used for hardware ARGB cursor support on newer
chipsets.
2006-05-16 16:19:48 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Marius Strobl
8fcd3fd881 Replace references to lnc(4) with references to le(4) (so far the notes
still apply to le(4)) now that lnc(4) is removed and le(4) is going to
replace it.
2006-05-15 20:07:24 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Pyun YongHyeon
288292463f The sk(4) driver has moved to /sys/dev/sk 2006-04-27 00:14:02 +00:00
Gleb Smirnoff
e72f58bbd9 Add support for RTL8111B chip, that can be found on some mainboards,
for example ASUS P5PL2.

Tested by:	Vadim Frolov <vadim uch.net>
2006-03-22 07:33:03 +00:00
Warner Losh
38637d7d9d Remove de driver from old location. 2006-02-26 17:52:51 +00:00
Eric Anholt
14b4fdc4d6 Add support for the Intel E7205 chipset.
PR:		kern/91315
Submitted by:	Joerg Pulz <Joerg.Pulz@frm2.tum.de>
2006-02-17 01:40:46 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
John Baldwin
cb46523df0 Don't add an agp child in vgapci's attach routine if the PCIY_AGP
capability is present as not all devices supported by the agp_i810 driver
(such as i915) have the AGP capability.  Instead, add an identify routine
to the agp_i810 driver that uses the PCI ID to determine if it should
create an agp child device.
2006-02-01 15:45:29 +00:00
Gleb Smirnoff
8d6b240b0d Check ifp before dereferencing it in xl_detach(). xl_detach() can be called
from xl_attach(), when ifp is not defined yet.

Found with:	Coverity Prevent(tm)
2006-01-18 09:42:21 +00:00
John Baldwin
2971d7ab9b Fix a memory leak I introduced with the hostb/vgapci stuff.
Reported by:	Coverity (via dfr's clue-bat)
2006-01-17 17:02:45 +00:00
Pyun YongHyeon
e0078c6436 The number of ticks per usec for YUKON_EC is 125. 2006-01-17 06:58:25 +00:00
Pyun YongHyeon
c57c874824 fix interrupt moderation timer frequencies for Yukon
Obtained from:	OpenBSD
2006-01-17 05:57:44 +00:00
Pyun YongHyeon
878793bc2f remove trailing spaces 2006-01-17 05:41:20 +00:00
Bjoern A. Zeeb
2166476ae9 Remove unused code.
Found with:	Coverity Prevent(tm)
2006-01-15 01:39:01 +00:00
John Baldwin
2a3d3a660b Use the copy of the card's MAC address saved in tulip_enaddr() in the softc
if we need a valid MAC address (for probing the media for example) before
ether_ifattach() has been called since IF_LLADDR() is NULL then.

Tested by:	tisco
2005-12-22 16:18:23 +00:00
Ruslan Ermilov
4d5f30e06e Drivers for AMD-8111 and NVIDIA nForce2/3/4 SMBus 2.0 controllers. 2005-12-21 15:49:51 +00:00
John Baldwin
87f34c405b Use ETHER_ADDR_LEN rather than hardcoding 6. 2005-12-21 15:15:43 +00:00
John Baldwin
33181681c7 - Use PCIR_BAR() macro for the BAR for the aperture.
- Axe macros used for walking PCI capabilities list.  We now ask the PCI
  bus to find caps for us rather than doing it in the drm and agp drivers.
2005-12-20 22:45:24 +00:00
John Baldwin
e9aa66d283 - Bump FreeBSD version for the hostb(4) and vgapci(4) drivers as well as
the addition of pci_find_extcap().
- Change the drm drivers to attach to vgapci.  This is #ifdef'd so the
  code can be shared across branches.
- Use pci_find_extcap() to look for AGP and PCIE capabilities in drm.
- GC all the drmsub stuff for i810/i830/i915.  The agp and drm devices are
  now both children of vgapci.
2005-12-20 22:44:36 +00:00
John Baldwin
c626f1fe9a Change the various AGP drivers that attach to the Host-PCI bridge device to
attach to the hostb driver instead.  This means that agp can now be loaded
at runtime (in theory at least).  Also, the drivers no longer have to
explicity call device_verbose() to cancel out any earlier calls to
device_quiet() by the hostb(4) driver (this shows a limitation in new-bus,
drivers really shouldn't be doing device_quiet() until they know they are
going to drive that device, i.e. in attach).
2005-12-20 21:12:26 +00:00
John Baldwin
c8d81a41f4 Change the agp_find_device() to return the first agp device that has been
attached to a driver rather than always returning agp0.
2005-12-20 21:06:43 +00:00
John Baldwin
5bcf484019 Don't map the AGP aperture into contiguous KVA. The various graphics
drivers already map sections into KVA as needed anyway.  Note that this
will probably break the nvidia driver, but I will coordinate to get that
fixed.

MFC after:	2 weeks
2005-12-20 20:05:21 +00:00
John Baldwin
4c2546c1a9 Destroy the /dev device before destroying the mutex or releasing resources
rather than afterwards.

MFC after:	1 week
2005-12-20 20:03:16 +00:00
John Baldwin
04d6a912e4 Use pci_find_extcap() to search for AGP capabilities (PCIY_AGP). 2005-12-20 19:58:28 +00:00
Ruslan Ermilov
aa4f8911d7 Backout pseudo nForce2/3/4 support. These devices (as well as
AMD-8111 SMBus 2.0 controller) are all SMBus 2.0 controllers,
and need another implementation of SMBus access methods, while
this driver supports AMD-756 SMBus 1.0 controller and clones,
including AMD-8111 SMBus 1.0 controller.

Tested by:	Vladimir Timofeev (0x006410de),
		mezz (0x008410de),
		ru (0x00d410de)

All of us got the same(!) nonsense when running ``mbmon -S'',
repeated every four rows.
2005-12-16 22:58:51 +00:00
Ruslan Ermilov
1a40739a00 Fix PCI ID of the AMD-8111 System Management controller so it matches
SMBus 1.0 and not SMBus 2.0.

AMD-8111 hub (datasheet is publically available) implements both SMBus
2.0 (a separate PCI device) and SMBus 1.0 (a subfunction of the System
Management Controller device with the base I/O address is accessible
through the CSR 0x58).  This driver only supports AMD-756 SMBus 1.0
compatible devices.

With the patched sysutils/xmbmon port (to also fix PCI ID and to enable
smb(4) support), I now get:

pciconf:
none0@pci0:7:2: class=0x0c0500 card=0x746a1022 chip=0x746a1022 rev=0x02 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8111 SMBus 2.0 Controller'
    class    = serial bus
    subclass = SMBus
amdpm0@pci0:7:3:        class=0x068000 card=0x746b1022 chip=0x746b1022 rev=0x05 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8111 ACPI System Management Controller'
    class    = bridge

dmesg:
amdpm0: <AMD 756/766/768/8111 Power Management Controller> port 0x10e0-0x10ff at device 7.3 on pci0
smbus0: <System Management Bus> on amdpm0

# mbmon -A -d
Summary of Detection:
 * SMB monitor(s)[ioctl:AMD8111]:
  ** Winbond Chip W83627HF/THF/THF-A found at slave address: 0x50.
  ** Analog Dev. Chip ADM1027 found at slave address: 0x5C.
 * ISA monitor(s):
  ** Winbond Chip W83627HF/THF/THF-A found.

I think the confusion comes from the fact that nobody really tried
SMBus with xmbmon :-), since sysutils/xmbmon port doesn't come with
SMBus support enabled, neither in FreeBSD 4, nor in later versions,
so mbmon(1) was just showing the values from the Winbond sensors
accessible through the ISA I/O method (mbmon -I), for me anyway.

On my test machine, the amdpm(4) didn't even attach due to I/O port
allocation failure (who knows what the hell it read from CSR 0x58
of the SMBus 2.0 device :-), which isn't in the CSR space).

I've also checked that lm_sensors.org uses correct PCI ID for SMBus
1.0 of AMD-8111:

i2c-amd756.c:   {PCI_VENDOR_ID_AMD, 0x746B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111 },

This driver is analogous to our amdpm.c which supports SMBus 1.0
AMD-756 and compatible devices, including SMBus 1.0 on AMD-8111.

i2c-amd8111.c:  { 0x1022, 0x746a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },

This driver is analogous to nForce-2/3/4, i2c-nforce2.c, which
supports SMBus 2.0, and which our amdpm.c does NOT support
(SMBus 2.0 uses a different, ACPI-unified, API to talk to SMBus).
At least I know for sure it doesn't work with my nForce3.  :-)

(The xmbmon port will be fixed to correct the PCI ID too and to
enable the smb(4) support.)
2005-12-16 15:03:16 +00:00
John Baldwin
23de16f9a7 Add support for the nForce2/3/4 SMBus controllers which all contain two
SMBus busses.  Because of limitations in smbus_if.m, the second smbus is
attached to an amdpm1 device that is a child of amdpm0.

Submitted by:	Artemiev Igor ai (at) bmc dot brk dot ru
2005-12-14 17:49:45 +00:00
Scott Long
73c8420784 The if_ti Tigon I/II driver has moved to /sys/dev/ti 2005-12-10 00:38:33 +00:00
Ruslan Ermilov
3238c6bd33 Fix -Wundef from compiling the amd64 LINT. 2005-12-04 10:06:06 +00:00
Eric Anholt
8ec9a6c5a6 Add support for i915 GMCH AGP. This diff is a combination of work by myself
and some fixes from Motomichi Matsuzaki.  Testing involved many people, but the
final, successful testing was from rwatson who endured several rounds of "it
crashes at XYZ stage" "oh, please correct this typo and try again."  The Linux
driver, and to a small extent the limited specs, were both used as a reference
for how to program the chipset.

PR:		kern/80396
Submitted by:	Martin Mersberger
2005-12-02 23:51:36 +00:00
Ruslan Ermilov
6a4cb6fd25 Fix the type of "eaddr" to guarantee the required alignment.
Suggested by:	marcel
2005-12-01 21:18:04 +00:00
Ruslan Ermilov
3faffd5dae Byte copy IF_LLADDR() on stack to align it to be safe for typecasts.
Tested by:	jhb
2005-11-30 17:48:23 +00:00
Eric Anholt
f0fc8e98b3 Add support for the i855GM, tested by an r300 user. 2005-11-29 04:53:22 +00:00
John Baldwin
f5e19c7342 Various fixes to make de(4) not panic after ru@'s IF_LLADDR() changes:
- Don't call tulip_addr_filter() to reset the RX address filter in
  tulip_reset() since that gets called before ether_ifattach().  Just
  call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
  the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
  thing with the added bonus that we leaked the driver lock if the MTU
  was > ETHERMTU in the homerolled version.  This part will be MFC'd.

Clue from:	wpaul (1)
Stolen from:	marcel (2 via patch for dc(4))
MFC after:	1 week
2005-11-21 21:50:07 +00:00
Jung-uk Kim
5c0619a7f0 0xb1881106 seems to be an AGP bridge and some BIOSes incorrectly handle
the bridge.  Therefore, we give the same treatment as we did for nForce3-250
and ULi chipsets.  VIA AGPv3 code was copied from agp_via.c.
2005-11-14 21:54:20 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Ruslan Ermilov
f5071cacb1 Catch up with IFP2ENADDR() type change (array -> pointer). 2005-11-11 12:17:31 +00:00
John Baldwin
13df733045 - Use callout_*() to manage the callout and make it MPSAFE.
- Fix locking in detach(), we only need to lock across vr_stop().

Tested by:	Mike Tancsa mike at sentex dot net
MFC after:	1 week
2005-10-31 21:37:27 +00:00
John Baldwin
aa14e8f4b4 Add the device ID for the VIA VT8235 south bridge.
PR:		kern/62438
Submitted by:	FUJIMOTO Kou fujimoto at j dot dendai dot ac dot jp
Tested by:	Oliver Fromme olli at secnetix dot de
MFC after:	1 week
2005-10-31 18:43:28 +00:00
John Baldwin
6647585e2d Some of the VIA pm and propm devices are actually the same device as the
PCI-ISA bridge.  Thus, when viapm0 or viapropm0 attaches, isab0 dosen't
attach so there is no isa0 bus hung off of that bridge.  In the non-ACPI
case, legacy0 will add an isa0 anyway as a fail-safe, but ACPI assumes that
any ISA bus will be enumerated via a bridge.  To fix this, call
isab_attach() to attach an isa0 ISA child bus device if the pm or propm
device we are probing is a PCI-ISA bridge.  Both drivers now have to
implement the bus_if interface via the generic methods for resource
allocation, etc. to work.  Also, we now add 2 new ISA bus drivers that
attach to viapm and viapropm devices.

PR:		kern/87363
Reported by:	Oliver Fromme olli at secnetix dot de
Tested by:	glebius
MFC after:	1 week
2005-10-31 18:31:16 +00:00
Bill Paul
bcb02fd532 Remove forgotten, no longer needed WB_UNLOCK() from the end wb_ioctl().
With this change, the driver tests good (at least on i386):

wb0: <Winbond W89C840F 10/100BaseTX> port 0xb800-0xb87f mem 0xe6800000-0xe680007f irq 12 at device 10.0 on pci0
miibus1: <MII bus> on wb0
amphy0: <Am79C873 10/100 media interface> on miibus1
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wb0: Ethernet address: 00:00:e8:18:2a:02
wb0: link state changed to DOWN
wb0: link state changed to UP
2005-10-28 02:17:40 +00:00
John Baldwin
80e963994a Fixup locking and mark MPSAFE.
- Add locked variants of init() and start().
- Use callout_*() to manage callout.
- Test IFF_DRV_RUNNING rather than IFF_UP in wb_intr() to see if we are
  still active when an interrupt comes in.

I couldn't find any of these cards anywhere to test on myself, and google
turns up references to FreeBSD and OpenBSD manpages for this driver when
trying to locate a card that way.  I'm not sure anyone actually uses these
cards with FreeBSD.

Tested by:	NO ONE (despite repeated requests)
2005-10-27 21:22:58 +00:00
John Baldwin
4cc88f8f33 - Use if_printf() and device_printf() and remove vr_unit from the softc.
I had to initialize the ifnet a bit earlier in attach so that the
  if_printf()'s in vr_reset() didn't explode with a page fault.
- Use M_ZERO with contigmalloc() rather than an explicit bzero.
2005-10-27 21:18:37 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
Warner Losh
349920b201 Remove dc after repo copy. 2005-10-18 06:10:03 +00:00
John Baldwin
26390635de Only allow the sk(4) driver to attach to revision 2 of the LinkSys EG1032
cards and teach the re(4) driver to attach to revision 3 cards.

Submitted by:	Fredrik Lindberg fli+freebsd-current at shapeshifter dot se
MFC after:	2 weeks
Reviewed by:	imp, mdodd
2005-10-14 18:51:30 +00:00