when -fstack-protector-strong is not available, like it was implicitly before
r288669
As noted by antoine@, devel/gcc (which is 4.8.5) lacks -fstack-protector-strong
support, whereas 4.8.4i (devel/gcc48) has the support.
Until a version is available which has -fstack-protector-strong support, be
conservative and only enable support with 4.9+.
Reviewed by: pfg
X-MFC with: r288669, r289465
Differential Revision: https://reviews.freebsd.org/D3924
This includes clang 3.5.0+, gcc 4.2.1, gcc 4.8.4+
This allows me to do subdirectory makes again after setting
MAKESYSPATH on 10.2-RELEASE as it comes with clang 3.4.1.
As a sidenote: this isn't technically correct for all vintages
of gcc 4.2.1, but will be correct when gcc is rebuilt/reinstalled
after r286074, so this version check should be good enough.
X-MFC with: r288669
Differential Revision: https://reviews.freebsd.org/D3924
Reviewed by: emaste, pfg
Bmake has a documented feature of '-N' to skip executing commands which is
specifically intended for debugging top-level builds and not recursing into
sub-directories. This matches the older 'make -n' behavior we added which made
'-n -n' the recursing target and '-n' a non-recursing target.
Removing the '-n -n' feature allows the build to work as documented in
the bmake manpage with '-n' and '-N'. The older '-n -n' feature was also
not documented anywhere that I could see.
Note that the ${_+_} var is still needed as currently bmake incorrectly
executes '+' commands when '-N' is specified.
The '-n' and '-n -n' features were broken for several reasons prior to this.
r251748 made '_+_' never expand with '-n -n' which resulted in many
sub-directories not being visited until fixed 2 years later in r288391, and
many targets were given .MAKE over the past few years which resulted in
non-sub-make commands, such as rm and ln and mtree, to be executed.
This should also allow removing some indirection hacks in bsd.subdir.mk and
other cases of .USE that have a .MAKE by using '+'.
Sponsored by: EMC / Isilon Storage Division
Discussed on: arch@ (mostly silence)
Before this, if a file was installed to DESTDIR/some/dir and that directory
was missing due to not having ran 'make distrib-dirs' yet, the file would
be installed as 'some/dir'. For something like bsd.incs.mk with INCLUDEDIR
being a sub-directory of /usr/include, this could result in all of the headers
being installed to a file rather than getting a directory of them.
Now it will error that the file/directory does not exist rather than hide
the issue.
Another option being discussed is to implement GNU's install -D flag which
would auto create any missing directories.
This is a mitigation of the problem. The proper order to the build is to
run 'make distrib-dirs' first, but that can be forgotten if building from
a sub-directory after updating the source code to the latest revision.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The 'config' target isn't really needed right now so just remove it to avoid
any clashes with config(8) building. It's also likely misspelled and should
be 'configs' if we decide to add it back. This was just a convenience
target recently added.
Sponsored by: EMC / Isilon Storage Division
For example in lib/atf/libatf-c++/tests/detail it is now possible to
run 'make application_test'. This was intended to worked for PROGS,
but lacked support for PROGS_CXX.
Also fix redefining the main PROG target to recurse. This isn't needed
since the main process is setting PROG/PROG_CXX to handle it directly
via bsd.prog.mk.
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Some example where this is a problem:
lib/atf/libatf-c++/tests/Makefile:SRCS.${_T}= ${_T}.cpp test_helpers.cpp
lib/atf/libatf-c++/tests/detail/Makefile:SRCS.${_T}= ${_T}.cpp test_helpers.cpp
lib/atf/libatf-c/tests/Makefile:SRCS.${_T}= ${_T}.c test_helpers.c
lib/atf/libatf-c/tests/detail/Makefile:SRCS.${_T}= ${_T}.c test_helpers.c
lib/libpam/libpam/tests/Makefile:SRCS.${test} = ${test}.c ${COMMONSRC}
A similar change may be needed for FILES, SCRIPTS, or INCS, but for now stay
with just SRCS.
Reported by: rodrigc
MFC after: 3 weeks
X-MFC-With: r288218
Sponsored by: EMC / Isilon Storage Division
more typical ALL_SUBDIR_TARGETS entries and target hooks in bsd.incs.mk,
bsd.files.mk and bsd.confs.mk.
This allows the targets to be NOPs if unneeded and still work with the
shortcut 'make includes' to build and then install in a parallel-safe manner.
Sort and re-indent the ALL_SUBDIR_TARGETS with the new entries.
Sponsored by: EMC / Isilon Storage Division
Also improve documentation.
The SUBDIR_TARGETS variable should really be named LOCAL_SUBDIR_TARGETS, but
renaming it may be a surprise for downstream vendors who use this variable.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Before this, the target was unknown. Now it will recurse on subdirs and run
the target in the current directory. It is required to recurse as there
may be subdirs that have objs in their directory or in the object directory,
so it is not enough to just delete the objdir of the subdir parent.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
When run from bin/ls/tests, for example, the value of TESTSDIR would be
${TESTSBASE}/${RELDIR:H} -> /usr/tests/bin/ls/tests/.. ->
/usr/tests/bin/ls
Document the new behavior in bsd.README.
While here, also document TESTSBASE
Relnotes: yes
Differential Revision: D1022
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- projects/bmake and subsequent commits provide SRCTOP; there's no need to
manually specify it now.
- Compute a sane default for OBJTOP based on .OBJDIR and RELDIR. Manually
specifying this is probably no longer needed, but it persists just in case
(supporting commits will need to be made to move it out of some of the meta
.mk files).
- Compute a sane default for TESTSRC. Error out if the path cannot be found.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
stage_* targets.
In non-jobs mode we can achieve the same result by simply introducing
the targets in the correct order.
Thus in bsd*.mk we simply add targets to STAGE_TARGETS which we
realize in meta.stage.mk
Reviewed by: bdrewery
only when _WITHOUT_SRCCONF wasn't defined. Restore this
behavior because bsd.ports.mk depends on this in subtle
ways. The compat include of bsd.compiler.mk should
be removed in 12 anyway.
PR: 203540
The general stack protector is known to be weak and has pretty small
coverage. While setting stack-protector-all would give better protection
it would come with a performance cost: for this reason Google's Chrome OS
team developed a new stack-protector-strong variant.
In addition to the protections offered by -fstack-protector, the new option
will guard any function that declares any type or length of local array,
even those in structs or unions. It will also protect functions that use a
local variable's address in a function argument or on the right-hand side
of an assignment.
The option was introduced in GCC-4.9, but support for it has been
back-ported to our base GCC (r286074) and is also available in clang.
The change was tested with dbench and doesn't introduce performance
regressions. An exp-run over the ports tree revealed no failures when
using the stricter stack-protector-all. Thanks to all testers involved.
Reference:
https://outflux.net/blog/archives/2014/01/27/fstack-protector-strong/
Tested by: pho, portmgr (antoine)
Discussed with: secteam (delphij)
Differential Revision: https://reviews.freebsd.org/D3463
PR: 203394 (exp-run)
Relnotes: yes
MFC: no (not supported in older clang)
This fixes staging errors for non-parallel builds that have LINKS.
Creating hardlinks must always happen after the actual files are installed.
The staging code was protected by an .ORDER statement that only affected
parallel -j builds but not non-parallel builds. Fix this by making the
real stage_links.SET (stage_links.links, stage_links.mlinks, etc) targets
depend on the main targets for all of the other possible staging needs. For
example, stage_links.links will depend on stage_as and stage_files, which have
their own dependencies to stage_as.prog or stage_files.prog or stage_files.SET,
which is enough to satistfy the ordering.
Also remove the requirement that symlinks be created last, as they can
safely be made without the source being present unlike hardlinks. This also
fixes symlinks to come before hardlinks as it is possible, in theory, to
hardlink a symlink. This is not actually supported here though.
Sponsored by: EMC / Isilon Storage Division
This is converting the path usr/share/tmac.*stage to something else, but
nothing ever installs or reads from such a path. They might look in
stage.*usr/share/tmac, but that's not what this is matching. Additionally
the .dirdeps match all of the tmac files back to gnu/usr.bin/groff/tmac
fine.
Sponsored by: EMC / Isilon Storage Division
When bmake was initially imported at r241298 shell commands were no longer
ran with 'set -e' as they were before. This was fixed in r254980 so they
again always use 'set -e'.
Sponsored by: EMC / Isilon Storage Division
This is a NOP as r254419 enabled this by default in bmake. Add it here though
to ensure it is known that we are using this as a default and in case a
bmake import removes the default we have.
This tells bmake to always pass job tokens into sub-commands. Otherwise
it would only do so if the target being built depended on the special
.MAKE target (which causes _all_ commands to be executed with -n as well)
or if the command matches '${MAKE}/${.MAKE}/$(MAKE)/$(.MAKE)/make' (before
expansion, so ${LIB32WMAKE} would not qualify). Using '+' on a command
(which runs the command with -n) would not pass the job token even though it
is a documented way to achieve the .MAKE effect on a command.
Sponsored by: EMC / Isilon Storage Division
This fixes atf-c.h not properly being installed to /usr/include/ (in
the stagedir) via its override of 'INCSDIR_atf-c.h= ${INCLUDEDIR}'.
This fixes building things that depend on atf.
Staging seems to ignore OWN/GRP/MODE settings and needs further exploration.
Sponsored by: EMC / Isilon Storage Division
bsd.obj.mk handles the needs fine. When an objdir exists it will
just rm -Rf the objdir. When it does not exist though it will
call 'clean' and 'cleandepend', which properly recurse in bsd.progs.mk.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This fixes the following errors:
make: don't know how to make bsd.README. Stop
make: don't know how to make auto.obj.mk. Stop
This is easily seen in sys/dev/*.
The new behavior is now the expected output:
make: no target to make.
This would happen as MAKESYSPATH (.../share/mk) is auto added to the -I list.
Any directory where make is ran in the src tree that has no local Makefile
would then try executing the target in share/mk/Makefile, which by default
was to build the first entry in FILES. Of course, because bsd.README and
auto.obj.mk are not in the current directory the error is shown.
This check only works for bmake, but I will still MFC it with an extra
'!defined(.PARSEDIR) ||' guard for stable/10.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This mostly fixes an interaction with bsd.test.mk with PROGS and SCRIPTS.
This was most notable with 'make clean' and 'make install', which r281055
and r272055 attempted to address but were inadequate.
It also addresses similar issues in bsd.progs.mk when not using bsd.test.mk.
This also fixes cases of NOT running commands in the parent when using
bsd.progs.mk:
- 'make clean' was not run for the main process for Makefiles which had both
FILES and SUBDIR but no PROGS or SCRIPTS. This usually was just a
leftover Kyuafile.auto. One such example is usr.bin/bmake/tests/sysmk/t1/2.
- 'make obj' was not running in the current directory with bsd.test.mk due
to early inclusion of bsd.subdir.mk. This was not really a problem due to
the SUBDIRS using 'mkdir -p' for their objdirs.
There were subtle bugs causing this wrong behavior:
1. bsd.progs.mk needs to set SCRIPTS to empty when recursing to avoid
the sub-makes from installing, cleaning or building the SCRIPTS;
only the parent make should be doing this. r281055 effectively did
the same but wasn't enough.
2. CLEANFILES may contain (especially from *.test.mk) files which only
the parent should clean, such as from FILES and SCRIPTS. To resolve
sub-makes also cleaning these, reset CLEANFILES and CLEANDIRS in the
children before including bsd.prog.mk. A tempting alternative would be
to only handle CLEANFILES in the parent but then the child bsd.prog.mk
CLEANFILES of per-PROGS wouldn't be setup.
3. bsd.subdir.mk was included too soon in bsd.test.mk. It needs to be
included after bsd.prog.mk as the SCRIPTS logic is short-circuitted if
'install:' is already defined (which bsd.subdir.mk does). There is
actually no need to include bsd.subdir.mk from bsd.test.mk as bsd.prog.mk
and bsd.obj.mk will do so in the proper order. The description in r257095
covers this for FILES and was fixed differently, though changing the
handling of target(install) in bsd.prog.mk may make sense after more
research.
4. bsd.progs.mk had extra logic to handle recursing SCRIPTS if PROGS was
empty, which isn't its business to be doing. SCRIPTS is handled fine
by bsd.prog.mk. This mostly reverts and reworks the fix in r259209 and
partially reverts r272055.
5. bsd.progs.mk has no need to depend 'all:' on SCRIPTS and FILES. These
are handled by bsd.prog.mk/bsd.files.mk fine. This also partially reverts
r272055.
6. bsd.progs.mk was not drop-in safe for bsd.prog.mk. Move the PROGS
check from r273186 to allow it to be used safely.
Specific tested cases:
SCRIPTS:no PROGS:no FILES:yes SUBDIR:yes
usr.bin/bmake/tests/sysmk/t1/2
SCRIPTS:yes PROGS:no FILES:yes SUBDIR:no
usr.bin/bmake/tests/sysmk/t1/2/1
SCRIPTS:yes PROGS:yes FILES:yes SUBDIR:yes
lib/libthr/tests
SCRIPTS:yes PROGS:no FILES:yes SUBDIR:no
usr.bin/yacc/tests
libexec/atf/atf-sh/tests
A full buildworld/installworld/clean comparison with mtree was also done.
The only relevant difference was the new fixed behavior of removing
Kyuafile.auto from the objdir in 'clean'.
Converting SCRIPTS to be a special case FILES group will make this less
fragile and is being explored.
One known remaining issue is 'cleandepend' removing the tags files for
every recursive call.
Note that the 'make clean' command runs for the CURDIR last, which can make
it appear to run multiple times when cleaning in tests/, but each command is
for a SUBDIR returning up the chain. This is purely bsd.subdir.mk behavior.
PR: 191055
PR: 191955
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
In the first build the TOOLSDIR does not exit yet which causes CC to default
to the sys.mk version. Once a TOOLSDIR is created during the build though,
this logic was changing CC to ${TOOLSDIR}/usr/bin/cc even though that file
did not exist. Thus CC went from 'cc' to '/usr/bin/cc' which forced a
rebuild of everything while using the same compiler. Check that TOOLSDIR is
not empty to avoid this. If there is actually a TOOLSDIR cc then it will be
used and properly rebuild.
Sponsored by: EMC / Isilon Storage Division
Filemon(4) will record paths as they are seen, not as fully resolved. make(1)
will take the .MAKE.META.IGNORE_PATHS values and resolve them. This creates
a discrepancy if CCACHE_DIR is a symlink. Fix this by ensuring it is
resolved for its actual usage.
Submitted by: sjg
When inspecting this value it is more expected to have it show the
automatically-created directory value rather than CURDIR.
Sponsored by: EMC / Isilon Storage Division
This limits CLEANFILES removal to just bsd.obj.mk now and removes the need
for NOPATH_FILES.
This reverts r96529 which was done due to the command line being too long
for libc. Since then all architectures now use 256k for ARG_MAX (r170102).
Regardless of that, the libc CLEANFILES is only 72k now. Others
may be larger but not likely to hit the limit. If needed, we can improve
the bsd.obj.mk clean: target to split up the list via bmake features.
This also removes some workarounds that are no longer needed.
- a.out removal
- OBJS.tmp, which has not been needed since r117080.
- *.so, which has not been needed since a .so->.So rename in r42450.
This also fixes STATICOBJS and SHLIB_LINK not being in the .NOPATH list.
Sponsored by: EMC / Isilon Storage Division
r284708 addressed this slightly but seems to have put the make(showconfig)
guard in the wrong place. Rather than guard setting the default obj directory,
guard inclusion of auto.obj.mk. This avoids creating SRCTOP/obj and
SRCTOP/release/obj when running makeman.
Sponsored by: EMC / Isilon Storage Division
This avoids easily colliding multiple src trees with the same objects. Having
multiple checkouts in dir/ dir2/ dir3/ would all use obj/ without any unique
identifier inside of obj/. This pattern is more likely to be used due
to the non-META_MODE behavior working with it fine.
In environments where ../obj/ is wanted as the obj directory the value of
OBJROOT can be set to ${SRCTOP:H}/obj/ instead via src-env.conf (set by
SRC_ENV_CONF) or environment. For environment it must be single quoted or
escaped. This will be more likely for vendors who are building images or using
NFS for builds. In those cases MAKEOBJDIRPREFIX may already be utilized and
is supported.
Discussed with: imp
Sponsored by: EMC / Isilon Storage Division
The preferred way to modify the object directory root is to use OBJROOT.
However, setting OBJROOT to ${MAKEOBJDIRPREFIX}/${SRCTOP}/ effectively behaves
as expected.
The problem with this before was that setting OBJROOT to contain SRCTOP
resulted in a recursive replacement (/usr/obj/usr/obj/usr/src/). Anchoring to
the start of the path for replacing SRCCTOP in CURDIR resolves this by
avoiding replacing SRCTOP when CURDIR is within the OBJDIR.
Sponsored by: EMC / Isilon Storage Division
This would lead to the 2nd build (after the first with a missing OBJROOT) to
always rebuild everything as the 'command' would have changed due to the path
changing from having // to only /.
Sponsored by: EMC / Isilon Storage Division
MAKEOBJDIR is based on OBJTOP so cannot be expanded until OBJTOP is set.
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
Sponsored by: EMC / Isilon Storage Division
If MAKEOBJDIRPREFIX is set, use it for default OBJROOT.
If MAKEOBJDIR is empty or not a suitable value (no '/')
set a default that works.
Reviewed by: bdrewery
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.
Differential Revision: https://reviews.freebsd.org/D3496
remove duplicates. We cannot sort SUBDIR because many Makefiles
have .WAIT in the list which is strongly ordering. Rather than
try to second guess when to sort and when to not sort depending
on .WAIT being in the list, just remove duplicates.
armv6. It's too ambiguous. We do use the softfp ABI for the moment on
armv6, but we allow floating point register use (and the compilers
will generate it). This is too ambiguous to use it as a decider for
which algorithms to use on the platform. Err on the side of caution
and not define it.
Submitted by: ian@
Reviewed by: andrew@
float targets. It is added for booke on powerpc and all arm with hf in
the string. Also add arm to all arm builds and armv6 to armv6 and
newer builds.
PR: 202641
For most cases they are equivalent, but BINUTILS_BOOTSTRAP is a
BROKEN_OPTION on arm64 as the in-tree GNU binutils do not support it,
so we need a separate internal flag for ELF Tool Chain.
Reviewed by: andrew, brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3381
As the name indicates, these are flags to pass to nm(1). The newer
binutils have a plugin mechanism so, to build something with LLVM's
LTO, we need to pass flags to nm(1). This commit also extends
lorder(1) to pass NMFLAGS to nm(1).
Clang emits SSE instructions on amd64 in the common path of
pthread_mutex_unlock. If the thread does not otherwise use SSE,
this usage incurs a context-switch of the FPU/SSE state, which
reduces the performance of multiple real-world applications by a
non-trivial amount (3-5% in one application).
Instead of this change, I experimented with eagerly switching the
FPU state at context-switch time. This did not help. Most of the
cost seems to be in the read/write of memory--as kib@ stated--and
not in the #NM handling. I tested on machines with and without
XSAVEOPT.
One counter-argument to this change is that most applications already
use SIMD, and the number of applications and amount of SIMD usage
are only increasing. This is absolutely true. I agree that--in
general and in principle--this change is in the wrong direction.
However, there are applications that do not use enough SSE to offset
the extra context-switch cost. SSE does not provide a clear benefit
in the current libthr code with the current compiler, but it does
provide a clear loss in some cases. Therefore, disabling SSE in
libthr is a non-loss for most, and a gain for some.
I refrained from disabling SSE in libc--as was suggested--because
I can't make the above argument for libc. It provides a wide variety
of code; each case should be analyzed separately.
https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055193.html
Suggestions from: dim, jmg, rpaulo
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell Inc.
We previously disabled CLANG_FULL on (little-endian) ARM because the
build failed. This is no longer the case and as of Clang 3.5 we cannot
build any part of the in-tree Clang with in-tree GCC, so it's no longer
necessary to disable CLANG_FULL.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2525
ELF Tool Chain elfcopy is nearly a drop-in replacement for GNU objcopy,
but does not currently support PE output which is needed for building
x86 UEFI bits.
Add a src.conf knob to allow installing it as objcopy and set it by
default for aarch64 only, where we don't have a native binutils.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2887
Allow Makefiles to define generic metadata settings that apply to all test
programs defined by a Makefile. The generic TEST_METADATA variable extends
the per-test program settings already supported via TEST_METADATA.<program>.
This feature will be useful to easily apply some settings to all programs
in a directory. In particular, Kyua 0.12 will support parallel execution
of test programs and a bunch of them will need to be tagged as is_exclusive
to indicate that they cannot be run in parallel with anything else due to
their side-effects. It will be reasonable to set this setting on whole
directories.
MFC after: 1 week
This makes sysroot usable for cross building, it also removes the need for
_SHLIBDIRPREFIX (keeps its definition since picobsd uses it and I have no time
to test it)
Differential Revision: https://reviews.freebsd.org/D2920
Submitted by: imp, adrian
Tested by: adrian
This means moving include of local.sys.mk and src.sys.mk too.
Introduce new includes to take the early slot, for the purpose
of being able to influence toolchains and the like.
Differential Revision: D2860
Reviewed by: imp
really need it can find it in the devel/fmake port or pkg install fmake.
Note: This commit is orthogonal to the question 'can we fmake buildworld'.
Differential Revision: https://reviews.freebsd.org/D2840
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
This change among other things improve search capabilities over the manpages
allowing fine grain query.
A new build option WITHOUT_MANDOCDB has been added to keep the ancient version
of the database and the tools. The plan is to entirely remove this option before
11.0-RELEASE.
Differential Revision: https://reviews.freebsd.org/D2603
Also use __DEFAULT_DEPENDENT_OPTIONS for options that
generally depend on META_MODE.
Deal with MK_META_MODE and MK_AUTO_OBJ directly.
Also allow MK_META_FILES if no -B
this is very handy for getting meta files from say buildworld
By moving META_MODE bits from local.sys.mk, they are easier
to skip when MK_META_MODE=no
Update some filters to cope with sync from head.
If buildworld etc or WITHOUT_META_MODE disable all the META_MODE
related options.
Now when a lib is marked as PRIVATELIB it is renamed into libprivate$foo instead
of being installed in /usr/lib/private and playing with rpath.
Also allow to install headers for PRIVATELIBS in that case the headers will be
installed in /usr/include/private/$foo
Keep the headers under a private namespace to prevent third party build system
to easily find them to ensure they are only used on purpose.
This allows for non base applications to statically link against a library in
base which is linked to a privatelib
Treating PRIVATELIBS as regular libraries allows to push them into our current
compatX packages if needed.
While here finish promotion of libevent as PRIVATELIB
Install header for bsdstat and libucl
Differential Revision: https://reviews.freebsd.org/D2365
Reviewed by: brooks, des
Discussed with: imp
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
case
Repro is as follows:
% sudo pkg install -y kyua
% sudo rm -Rf /usr/tests
% sudo make hier
% (cd lib/libthr/tests/; make obj; make depend; make all; sudo make install)
% (cd /usr/tests/lib/libthr; kyua list)
Failure seen in Jenkins build starting here:
https://jenkins.freebsd.org/job/FreeBSD_HEAD-tests2/927/
Pointyhat to: bapt
Consumers should not need to encode fifolog's dependency on libz.
Handle it automatically in src.libnames.mk.
Differential Revision: https://reviews.freebsd.org/D2278
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
While here fix missing link to libbsdxml for libmt
Fix overlinking in mt(1)
Make add an indirect libmt dependency on bsdxml to allow static linking if
needed
to dtrace(1) invocations during a build. This change includes -C in the
default flags, which has dtrace(1) run input scripts through the
preprocessor. While here, sort the definitions of CP and CPP in sys.mk.
Differential Revision: https://reviews.freebsd.org/D2204
Reviewed by: imp, rpaulo (previous revision)
dependent functions have been implemented, but this is enough for world.
Differential Revision: https://reviews.freebsd.org/D2132
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
