This commit has two pieces. One half is the watchdog kernel code which lives
primarily in hardclock() in sys/kern/kern_clock.c. The other half is a userland
daemon which, when run, will keep the watchdog from firing while the userland
is intact and functioning.
Approved by: jeff (mentor)
redundant paths to the same device.
This class reacts to a label in the first sector of the device,
which is created the following way:
# "0123456789abcdef012345..."
# "<----magic-----><-id-...>
echo "GEOM::FOX someid" | dd of=/dev/da0 conv=sync
NB: Since the fact that multiple disk devices are in fact the same
device is not known to GEOM, the geom taste/spoil process cannot
fully catch all corner cases and this module can therefore be
confused if you do the right wrong things.
NB: The disk level drivers need to do the right thing for this to
be useful, and that is not by definition currently the case.
of the infrastructure for the gamma driver which was removed a while back.
The DRM_LINUX option is removed because the handler is now provided by the
linux compat code itself.
to force the allocation of MAC labels for all mbufs regardless of
whether a configured policy requires labeling when the mbuf is
allocated. This can be useful it you anticipate loading a fully
labeled policy after boot and don't want mbufs to exist without
label storage, for performance measurement purposes, etc. It also
slightly lowers the overhead of m_tag labeling due to removing the
decision logic.
While here, improve commenting of other MAC options.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
in a debugging feature causing M_NOWAIT allocations to fail at
a specified rate. This can be useful for detecting poor
handling of M_NOWAIT: the most frequent problems I've bumped
into are unconditional deference of the pointer even though
it's NULL, and hangs as a result of a lost event where memory
for the event couldn't be allocated. Two sysctls are added:
debug.malloc.failure_rate
How often to generate a failure: if set to 0 (default), this
feature is disabled. Otherwise, the frequency of failures --
I've been using 10 (one in ten mallocs fails), but other
popular settings might be much lower or much higher.
debug.malloc.failure_count
Number of times a coerced malloc failure has occurred as a
result of this feature. Useful for tracking what might have
happened and whether failures are being generated.
Useful possible additions: tying failure rate to malloc type,
printfs indicating the thread that experienced the coerced
failure.
Reviewed by: jeffr, jhb
allows you to tell ip_output to fragment all outgoing packets
into mbuf fragments of size net.inet.ip.mbuf_frag_size bytes.
This is an excellent way to test if network drivers can properly
handle long mbuf chains being passed to them.
net.inet.ip.mbuf_frag_size defaults to 0 (no fragmentation)
so that you can at least boot before your network driver dies. :)
conditional in each driver on foo_RNDTEST being defined_
o bring HIFN_DEBUG and UBSEC_DEBUG out to be visible options; they control
the debugging printfs that are set with hw.foo.debug (e.g. hw.hifn.debug)
permit users and groups to bind ports for TCP or UDP, and is intended
to be combined with the recently committed support for
net.inet.ip.portrange.reservedhigh. The policy is twiddled using
sysctl(8). To use this module, you will need to compile in MAC
support, and probably set reservedhigh to 0, then twiddle
security.mac.portacl.rules to set things as desired. This policy
module only restricts ports explicitly bound using bind(), not
implicitly bound ports where the port number is selected by the
IP stack. It appears to work properly in my local configuration,
but needs more broad testing.
A sample policy might be:
# sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79"
This permits uid 425 to bind TCP sockets to ports 79 and 80. Currently
no distinction is made for incoming vs. outgoing ports with TCP,
although that would probably be easy to add.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
time and there's no indication that it will improve anytime soon.
By removing support for SimOS it is possible to build LINT on
Alpha, which is considered more important at the moment.
Not objected to on: alpha@
packets coming out of a GIF tunnel are re-processed by ipfw, et. al.
By default they are not reprocessed. With the option they are.
This reverts 1.214. Prior to that change packets were not re-processed.
After they were which caused problems because packets do not have
distinguishing characteristics (like a special network if) that allows
them to be filtered specially.
This is really a stopgap measure designed for immediate MFC so that
4.8 has consistent handling to what was in 4.7.
PR: 48159
Reviewed by: Guido van Rooij <guido@gvr.org>
MFC after: 1 day
similar patch has been in 4.x for a while, but is more hacky there.)
For this to work, vinum has to be loaded early (e. g. from
boot/loader), for obvious reasons. If the kernel env variable
(aka. loader variable) "vinum.autostart" is set, vinum then asks the
sysctl kern.disks for all available disks in the system, and scans
them for possible vinum headers.
For statically compiled kernels, this behaviour can be obtained even
without boot/loader by using "options VINUM_AUTOSTART" (though this is
not the recommended way).
Alternatively, the 4.x way to specify "vinum.drives" is also supported.
No further hacks (like the 4.x "vinum.root" variable) are needed,
since in 5.x, mountroot() asks back at the drivers to have them
resolve the name of the root FS into a dev_t (using the dev_clone
eventhandler).
(The MFC reminder below is for a partial MFC for vinum.autostart, the
rest is already there in 4.x.)
Timed out on: grog
MFC after: 2 weeks
This allows me to mark code which they control with #ifdef without
polluting files with #includes of opt_devfs.h and opt_geom.h.
Once these two options are removed, this will allow mechanical removal
of the bits their removal makes obsolete.
handling clean and functional as 5.x evolves. This allows some of the
nasty bandaids in the 5.x codepaths to be unwound.
Encapsulate 4.x signal handling under COMPAT_FREEBSD4 (there is an
anti-foot-shooting measure in place, 5.x folks need this for a while) and
finish encapsulating the older stuff under COMPAT_43. Since the ancient
stuff is required on alpha (longjmp(3) passes a 'struct osigcontext *'
to the current sigreturn(2), instead of the 'ucontext_t *' that sigreturn
is supposed to take), add a compile time check to prevent foot shooting
there too. Add uniform COMPAT_43 stubs for ia64/sparc64/powerpc.
Tested on: i386, alpha, ia64. Compiled on sparc64 (a few days ago).
Approved by: re
they may be statically linked into the kernel. Note that statically
linked modules, unlike dynamically linked modules, get INVARIANTS,
so if there are INVARIANTS failures, you'll bump into them rather
than not. Add the options to NOTES.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
This is an encryption module designed for to secure denial of access
to the contents of "cold disks" with or without destruction activation.
Major features:
* Based on AES, MD5 and ARC4 algorithms.
* Four cryptographic barriers:
1) Pass-phrase encrypts the master key.
2) Pass-phrase + Lock data locates master key.
3) 128 bit key derived from 2048 bit master key protects sector key.
3) 128 bit random single-use sector keys protect data payload.
* Up to four different changeable pass-phrases.
* Blackening feature for provable destruction of master key material.
* Isotropic disk contents offers no information about sector contents.
* Configurable destination sector range allows steganographic deployment.
This commit adds the kernel part, separate commits will follow for the
userland utility and documentation.
This software was developed for the FreeBSD Project by Poul-Henning Kamp and
NAI Labs, the Security Research Division of Network Associates, Inc. under
DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS
research program.
Many thanks to Robert Watson, CBOSS Principal Investigator for making this
possible.
Sponsored by: DARPA & NAI Labs.
configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).
As noted previously, don't use FAST_IPSEC with INET6 at the moment.
Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks
NB: But it will enable it in all kernels not having options "NO_GEOM"
Put the GEOM related options into the intended order.
Add "options NO_GEOM" to all kernel configs apart from NOTES.
In some order of controlled fashion, the NO_GEOM options will be
removed, architecture by architecture in the coming days.
There are currently three known issues which may force people to
need the NO_GEOM option:
boot0cfg/fdisk:
Tries to update the MBR while it is being used to control
slices. GEOM does not allow this as a direct operation.
SCSI floppy drives:
Appearantly the scsi-da driver return "EBUSY" if no media
is inserted. This is wrong, it should return ENXIO.
PC98:
It is unclear if GEOM correctly recognizes all variants of
PC98 disklabels. (Help Wanted! I have neither docs nor HW)
These issues are all being worked.
Sponsored by: DARPA & NAI Labs.
doesn't give them enough stack to do much before blowing away the pcb.
This adds MI and MD code to allow the allocation of an alternate kstack
who's size can be speficied when calling kthread_create. Passing the
value 0 prevents the alternate kstack from being created. Note that the
ia64 MD code is missing for now, and PowerPC was only partially written
due to the pmap.c being incomplete there.
Though this patch does not modify anything to make use of the alternate
kstack, acpi and usb are good candidates.
Reviewed by: jake, peter, jhb
aac driver dependent on the linux emulation module. This was
especially bad for the release engineers who tried to move the
aac driver from the kernel onto the drivers floppy. The linux
compat bits for this driver are now in their own driver, aac_linux.
It can be loaded as a module or compiled into the kernel. For
the latter case, the AAC_COMPAT_LINUX option is needed, along with
the COMPAT_LINUX option.
I've tested this in every configuration I can think of. This is an
MFC candidate for 4.7.
Idea from: rwatson
MFC after: 3 days
support this, we do have MI code that references it and is otherwise
unaware of an override. The alternative is to put knowledge in these
MI files about which platforms have the opt_kstack_pages.h option file.
It is more likely that other platforms will gain the ability to tune the
kstack size.
This feature can be disabled via the AHD/AHC_REG_PRETTY_PRINT kernel
option.
The ahc driver now uses the same debug options mechanism as ahd:
AHC_DEBUG - Compile in debugging code
AHC_DEBUG_OPTS - String of debug options as listed in aic7xxx.h
can avoid the cost of a large number of atomic operations if we're not
interested in the object count statistics.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
The CAM<>ATAPI layer was submitted by "Thomas Quinot <thomas@cuivre.fr.eu.org>"
changes form the version on the net by me (formatting, ability to be used
alone without the ATAPI native device driver, proper speed reporting...)
See /sys/conf/NOTES for usage.
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
cards. Since the firmware is hard coded into the kernel, I've made it
a kernel option (WI_SYMBOL_FIRMWARE).
Note: This only downloads into the RAM of these cards. It doesn't
download into FLASH, and is somewhat limited. There needs to be a
better way to deal, but this works for now. My Symbol LA4132 CF card
works now.
Obtained from: NetBSD
MAC support will be merged into the main tree over the next week in
reasonable size chunks; much more to follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
pci support. This really needs to be fixed properly some day, but judging
by the fact that the nopci case hasn't compiled for quite a while, there
does not seem to be much urgency.
Reviewed by: sos
NOTES. Add some comments about the potential problems associated with NIC
driver modules and changing these options.
Fix sorting problems in sys/conf/options with the MSIZE and MCLSHIFT
options.
Reviewed by: bde
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
This facilitates the use in circumstances where you are using a serial
console as well. GDB doesn't support anything higher than 9600 baud (19k2
if you are lucky), but the console does.
options do. Comments should be in NOTES and having the comments in two
places usually means that one place will just bitrot. Thus, remove the
comment for KTRACE_REQUEST_POOL from the previous revision.
Requested by: bde
operations to dump a ktrace event out to an output file are now handled
asychronously by a ktrace worker thread. This enables most ktrace events
to not need Giant once p_tracep and p_traceflag are suitably protected by
the new ktrace_lock.
There is a single todo list of pending ktrace requests. The various
ktrace tracepoints allocate a ktrace request object and tack it onto the
end of the queue. The ktrace kernel thread grabs requests off the head of
the queue and processes them using the trace vnode and credentials of the
thread triggering the event.
Since we cannot assume that the user memory referenced when doing a
ktrgenio() will be valid and since we can't access it from the ktrace
worker thread without a bit of hassle anyways, ktrgenio() requests are
still handled synchronously. However, in order to ensure that the requests
from a given thread still maintain relative order to one another, when a
synchronous ktrace event (such as a genio event) is triggered, we still put
the request object on the todo list to synchronize with the worker thread.
The original thread blocks atomically with putting the item on the queue.
When the worker thread comes across an asynchronous request, it wakes up
the original thread and then blocks to ensure it doesn't manage to write a
later event before the original thread has a chance to write out the
synchronous event. When the original thread wakes up, it writes out the
synchronous using its own context and then finally wakes the worker thread
back up. Yuck. The sychronous events aren't pretty but they do work.
Since ktrace events can be triggered in fairly low-level areas (msleep()
and cv_wait() for example) the ktrace code is designed to use very few
locks when posting an event (currently just the ktrace_mtx lock and the
vnode interlock to bump the refcoun on the trace vnode). This also means
that we can't allocate a ktrace request object when an event is triggered.
Instead, ktrace request objects are allocated from a pre-allocated pool
and returned to the pool after a request is serviced.
The size of this pool defaults to 100 objects, which is about 13k on an
i386 kernel. The size of the pool can be adjusted at compile time via the
KTRACE_REQUEST_POOL kernel option, at boot time via the
kern.ktrace_request_pool loader tunable, or at runtime via the
kern.ktrace_request_pool sysctl.
If the pool of request objects is exhausted, then a warning message is
printed to the console. The message is rate-limited in that it is only
printed once until the size of the pool is adjusted via the sysctl.
I have tested all kernel traces but have not tested user traces submitted
by utrace(2), though they should work fine in theory.
Since a ktrace request has several properties (content of event, trace
vnode, details of originating process, credentials for I/O, etc.), I chose
to drop the first argument to the various ktrfoo() functions. Currently
the functions just assume the event is posted from curthread. If there is
a great desire to do so, I suppose I could instead put back the first
argument but this time make it a thread pointer instead of a vnode pointer.
Also, KTRPOINT() now takes a thread as its first argument instead of a
process. This is because the check for a recursive ktrace event is now
per-thread instead of process-wide.
Tested on: i386
Compiles on: sparc64, alpha
is currently conditional on both the GEOM and GEOM_GPT options to
avoid getting GPT by default and having the MBR and GPT classes
clash.
The correct behaviour of the MBR class would be to back-off (reject)
a MBR if it's a Protective MBR (a MBR with a single partition of type
0xEE that spans the whole disk (as far as the MBR is concerned).
The correct behaviour if the GPT class would be to back-off (reject)
a GPT if there's a MBR that's not a Protective MBR.
At this stage it's inconvenient to destroy a good MBR when working
with GPTs that it's more convenient to have the MBR class back-off
when it detects the GPT signature on disk and have the GPT class
ignore the MBR.
In sys/gpt.h UUIDs (GUIDs) for the following FreeBSD partitions
have been defined:
GPT_ENT_TYPE_FREEBSD
FreeBSD slice with disklabel. This is the equivalent of
the well-known FreeBSD MBR partition type.
GPT_ENT_TYPE_FREEBSD_{SWAP|UFS|UFS2|VINUM}
FreeBSD partitions in the context of disklabel. This is
speculating on the idea to use the GPT to hold partitions
instead if slices and removing the fixed (and low) limits
we have on the number of partitions.
This commit lacks a GPT image for the regression suite.
option is used (not on by default).
- In the case of trying to lock a mutex, if the MTX_CONTESTED flag is set,
then we can safely read the thread pointer from the mtx_lock member while
holding sched_lock. We then examine the thread to see if it is currently
executing on another CPU. If it is, then we keep looping instead of
blocking.
- In the case of trying to unlock a mutex, it is now possible for a mutex
to have MTX_CONTESTED set in mtx_lock but to not have any threads
actually blocked on it, so we need to handle that case. In that case,
we just release the lock as if MTX_CONTESTED was not set and return.
- We do not adaptively spin on Giant as Giant is held for long times and
it slows SMP systems down to a crawl (it was taking several minutes,
like 5-10 or so for my test alpha and sparc64 SMP boxes to boot up when
they adaptively spinned on Giant).
- We only compile in the code to do this for SMP kernels, it doesn't make
sense for UP kernels.
Tested on: i386, alpha, sparc64
IFS had its fingers deep in the belly of the UFS/FFS split. IFS
will be reimplemented by the maintainer at a later date.
Requested by: adrian (maintainer)
behavior by default. Also, change the options line to reflect this.
If there are no problems reported this will become the only behavior and the
knob will be removed in a month or so.
Demanded by: obrien
following sysctl variables:
debug.mutex.prof.enable enable / disable profiling
debug.mutex.prof.acquisitions number of mutex acquisitions recorded
debug.mutex.prof.records number of acquisition points recorded
debug.mutex.prof.maxrecords max number of acquisition points
debug.mutex.prof.rejected number of rejections (due to full table)
debug.mutex.prof.hashsize hash size
debug.mutex.prof.collisions number of hash collisions
debug.mutex.prof.stats profiling statistics
The code records four numbers for each acquisition point (identified by
source file name and line number): longest time held, total time held,
number of non-recursive acquisitions, average time held. The measurements
are in clock cycles (as returned by get_cyclecount(9)); this may cause
measurements on some SMP systems to be unreliable. This can probably be
worked around by replacing get_cyclecount(9) by some incarnation of
nanotime(9).
This work was derived from initial patches by eivind.
dump the trace buffer feasible.
- Remove KTR_EXTEND. This changes the format of the trace entries when
activated, making writing a userland tool which is not tied to a specific
kernel configuration difficult.
- Use get_cyclecount() for timestamps. nanotime() is much too heavy weight
and requires recursion protection due to ktr traces occuring as a result
of ktr traces. KTR_VERBOSE may still require recursion protection, which
is now conditional on it.
- Allow KTR_CPU to be overridden by MD code. This is so that it is possible
to trace early in startup before pcpu and/or curthread are setup.
- Add a version number for the ktr interface. A userland tool can check this
to detect mismatches.
- Use an array for the parameters to make decoding in userland easier.
- Add file and line recording to the non-extended traces now that the extended
version is no more.
These changes will break gdb macros to decode the extended version of the
trace buffer which are floating around. Users of these macros should either
use the show ktr command in ddb, or use the userland utility which can be run
on a core dump.
Approved by: jhb
Tested on: i386, sparc64
The stat() and open() calls have been changed to make use of this new functionality. Using shared locks in
these cases is sufficient and can significantly reduce their latency if IO is pending to these vnodes. Also,
this reduces the number of exclusive locks that are floating around in the system, which helps reduce the
number of deadlocks that occur.
A new kernel option "LOOKUP_SHARED" has been added. It defaults to off so this patch can be turned on for
testing, and should eventually go away once it is proven to be stable. I have personally been running this
patch for over a year now, so it is believed to be fully stable.
Reviewed by: jake, obrien
Approved by: jake
