[Since the change to strict refcounting for in_multi objects, this test
began to fail; formerly the refcount was a count of the number of requests
for a given address, NOT a count of pointers to the object.]
- Close the new file objects created during socketpair() if the copyout of
the new file descriptors fails.
- Add a test to the socketpair regression test for this edge case.
and had no chance to match it by the 2nd address precisely.
Otherwise the unclosed range would bogusly extend to the end
of stream.
Add a basic regression test for the bug fixed. (This change
also fixes the more complex case 5.3 from `multitest.t'.)
Compared with: SUN and GNU seds
Tested by: regression tests
MFC after: 1 week
in a more reasonable way than BSD sed does: they properly
close the range even if we branched over its end. No doubt,
the range `1,5' should not match lines from 9 through 14.
them are related to the `c' function's need to know if we are at
the actual end of the address range. (It must print the text not
earlier than the whole pattern space was deleted.) It appears the
only sed function with this requirement.
There is `lastaddr' set by applies(), which is to notify the `c'
function, but it can't always help because it's false when we are
hitting the end of file early. There is also a bug in applies()
due to which `lastaddr' isn't set to true on degenerate ranges such
as `$,$' or `N,$' if N appears the last line number.
Handling early EOF condition in applies() could look more logical,
but it would effectively revert sed to the unreasonable behaviour
rev. 1.26 of main.c fought against, as it would require lastline()
be called for each line within each address range. So it's better
to call lastline() only if needed by the `c' function.
Together with this change to sed go regression tests for the bugs
fixed (c1-c3). A basic test of `c' (c0) is also added as it helped
me to spot my own error.
Discussed with: dds
Tested by: the regression tests
MFC after: 1 week
I have verified these with GNU sed 4.1.5 (and in some cases with Solaris
sed) and they are identical, with the following exceptions:
5.3: The result is unspecified and BSD sed behaves differently.
6.3: GNU sed gets it wrong
7.1: GNU sed gets it wrong
7.8: BSD sed gets it wrong
According to IEEE Std 1003.1, 2004 "Whenever the pattern space is
written to standard output or a named file, sed shall immediately
follow it with a <newline>."
An attempt at the same correction might have been made with r1.3,
which is however identical with r1.2.
effective group ID or to group ID of its parent directory.
- Add some comments from POSIX.
- Verify that after successful O_TRUNC open, size is equal to 0.
he is the file's owner, he can't set set-gid bit.
POSIX requires to return 0 and clear the bit, but FreeBSD returns
EPERM for UFS in such case. For now do the same in ZFS.
Almost all regression tests are based on very flexible fstest tool.
They verify correctness (POSIX conformance) of almost all file
system-related system calls.
The motivation behind this work is my ZFS port and POSIX, who doesn't
provide free test suites.
Runs on: FreeBSD/UFS, FreeBSD/ZFS, Solaris/UFS, Solaris/ZFS
To try it out:
# cd fstest
# make
# find tests/* -type d | xargs prove
various types, as well as pipes and fifos for good measure. RELENG_6
currently passes all of these tests, but 7-CURRENT fails 0-byte writes
and sends on all stream socket types (and fifos, as they are based on
stream sockets).
Bumped into by: peter
Diagnosed by: jhb
Problem of: andre
to floating-point, the result is a quiet NaN. The current implementation
may return a signaling NaN, and the vendor has no plans for changing this,
for reasons explained in the comment I added.
mbuf is dropped, to preserve the invariant in the PR_ADDR case.
Add a regression test to detect this condition, but do not hook it
up to the build for now.
PR: kern/38495
Submitted by: James Juran
Reviewed by: sam, rwatson
Obtained from: NetBSD
MFC after: 2 weeks
wildcard specifications. Earlier the only wildcard syntax
was "-j 0" for "any jail". There were at least
two shortcomings in it: First, jail ID 0 was abused; it
meant "no jail" in other utils, e.g., ps(1). Second, it
was impossible to match processed not in jail, which could
be useful to rc.d developers. Therefore a new syntax is
introduced: "-j any" means any jail while "-j none" means
out of jail. The old syntax is preserved for compatibility,
but now it's deprecated because it's limited and confusing.
Update the respective regression tests. While I'm here,
make the tests more complex but sensitive: Start several
processes, some in jail and some out of jail, so we can
detect that only the right processes are killed by pkill
or matched by pgrep.
Reviewed by: gad, pjd
MFC after: 1 week
nature of implied connect via sendto(). Oddly, uipc_usrreq.c implements
this for stream sockets, but doesn't set the flag in its protocol
definition so that it can actually be used. As such, the stream test is
implemented but doesn't run for now.
implemented properly for a number of kernel subsystems. In general, they
try to exercise the privilege first as the root user, then as a test user,
in order to determine when privilege is being checked.
Currently, these tests do not compare inside/outside jail, and probably
should be enhanced to do that.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
It is by no means expected to perform a complete test of the library
for correctness, but is meant to test the API to make sure libmp (or
libcrypto) updates don't totally break the library.
o If something is wrong with options, then output short usage help message.
o Output errstr returned from strtonum(3).
PR: bin/98141
Submitted by: Andrey Simonenko
subject: ranges of uid, ranges of gid, jail id
objects: ranges of uid, ranges of gid, filesystem,
object is suid, object is sgid, object matches subject uid/gid
object type
We can also negate individual conditions. The ruleset language is
a superset of the previous language, so old rules should continue
to work.
These changes require a change to the API between libugidfw and the
mac_bsdextended module. Add a version number, so we can tell if
we're running mismatched versions.
Update man pages to reflect changes, add extra test cases to
test_ugidfw.c and add a shell script that checks that the the
module seems to do what we expect.
Suggestions from: rwatson, trhodes
Reviewed by: trhodes
MFC after: 2 months
o Add mount and umount actions so that partitions can be in use.
o Extend the testing of the add verb to include overlapping
partitions.
o Add tests for the remove verb. this includes tests to remove
a partition when in use (i.e. is mounted).
o Add a MD5 checksum to the output of the conf action so that
it can be tested. Make sure the MD5 doesn't vary based on
certain dynamic behaviour that is irrelevant to the output.
o Add MD5 checksums to the expected result of conf actions.
Add support for read-write parameters. Allow an optional initializer
for read-write parameters. Print the value of those parameters on
success following the PASS.
the first part before starting, or the TCP port we want to bind may be in
use still. Sleep for a short period between tests.
Use SIGTERM instead of SIGKILL.
pru_abort() by closing a listen socket while completed connections are
presenting in its listen queue. Unfortunately, it's difficult to
trigger the other two pru_abort() cases using user APIs, so they are
not covered by this test.
mode. Support both connection via connect() and sendto(), but don't
compile in sendto() for now, since netipx doesn't appear to actually
implement that (doh).
times, with variable length sleeps between socket() and close(). This
will help to ensure that IPX/SPX timers fire while the sockets are
open, and hence have PCB's on the IPX pcb list, so that if timers are
going to stumble over PCB types they don't expect, it will happen as
part of this test.
o Change the result of gctl(001) now that a bogus verb still requires
a valid geom,
o Insert gctl(024) to test for an appropriate error when a bogus verb
is given that does have a proper geom parameter.
whole name. This does not unnecessarily close the door that in some
future we want to test on something other than md(4) devices.
Also add a "conf" action so that we can check whether a gctl actually
did the right thing or not. It's one thing to check that the result
strings are as expected, but it doesn't tell us if the end result is
correct. This needs a bit more fleshing out, but for now a visual
(i.e. manual) check suffices.
mdconfig(8), because we need a disk to work on.
o Extend the number of tests now that we have a disk.
o Simplify the driver. All parameters are ASCII strings now.
The testsuite is based on a simple driver program that builds a
request from the arguments passed to it and issues the request to
Geom. The driver emits FAIL with the error string or PASS depending
on whether the request completed with an error or not. A -v option
has been added to the driver and causes the request to be dumped.
The -v option to prove(1) controls the -v option to the driver.
The testsuite itself contains a hash of which the key constitutes
the arguments and the value is the expected result.
creation and at time of update using an additional call to listen().
This test also exercises SO_LISTENQLIMIT, a forthcoming socket option
that allows the retrieval (but not setting) of the queue limit.
Discussed with: andre
relating to O_RDWR file descriptors, which while not defined in POSIX,
are in fact used:
(1) Revise assumption that we have two file descriptors when testing I/O
operations on a fifo. Provide cleanup routines that handle either
two or three file descriptors (including a kqueue descriptor).
(2) Add an openfifo_rw() routine to supplement openfifo().
(3) kqueue_setup() now configures an existing kqueue to monitor a new
file descriptor, rather than allocating a new kqueue to monitor two
existing file descriptors.
(4) Wrap all direct poll/select/kqueue/FIONREAD interactions in a single
function, assert_status(), which takes a file descriptor, kqueue
descriptor, assertion of read/writable/exception states, and
test description, then tests the assertion. This reduces the bulk
of calls in many of the tests, making them shorter, more readable,
and easier to determine correct.
(5) Add a new test_events_rdwr() function, which performs a basic create/
write/read event test on a O_RDWR fifo file descriptor. This is
currently failed by our fifo code in HEAD due to a bug in FIONREAD
handling. Fix to be merged shortly.
Add test_kqueue(), which registers and unregisters various kqueue filter
types on a fifo in order to make sure that EVFILT_READ, EVFILT_WRITE can
be registered, and that EVFILT_NETDEV can't be registered. For now, we
don't test that EVFILT_VNODE can be registered on fifos, as that has been
broken at some point.
- Teach fifo_io about kqueue monitoring of fifo file descriptor status,
and add test cases for kqueue to match existing case for poll and
select. Add a new cleanup routine, cleanfifokq(), for use in tests that
use kqueues. kqueue_setup() sets up kqueue sessions, and kqueue_status()
returns file descriptor status.
- Correct a bug in select handling relating to the nfds argument, which
was incorrect so resulted in select occuring on the wrong file descriptor,
and possible false positive/negative results.
- Clarify error reporting in one byte write+read tests to distinguish
errors in the after case from the before case.
that don't obviously fit into create, open, and io. For now, add only a
regression test to make sure that lseek() fails with ESPIPE (which it
doesn't).
multicast group using a raw socket, then removing the interface on which
the group is found, and joining a multicast group using a udp socket,
then removing the interface on which the group is found. An if_disc
interface is used as the interface on which to attach.
NB: A panic currently results from running this regression test, so do
so with caution.
PR: 77665
Reported by: Gavin Atkinson <gavin dot atkinson at ury dot york dot ac dot uk>
Reported by: Brooks Davis <brooks at FreeBSD dot org>
- Test that the basic socket options have the right defaults, that we can
change them, read them back, etc.
- Add and remove some multicast addresses.
- Send a loopback multicast address and make sure it arrives intact.
There's more that could be done here, but it's a start.
MFC after: 3 days
using my own script to handle it. I wrote my own partially because
of all the quoting-issues involved with testing what I wanted to test,
and partially because this lets me commit one script and one data file,
instead of one-file-per-regression-test.
This suite was good enough for my initial testing (and it did help me
find a few bugs that would have otherwise been missed). I'm not sure
how well it will work in general use, but I figured I might as well
commit it. It won't *hurt* to have it available. At the worst, people
can just ignore it.
Approved by: re (blanket `env')
o getsockopt(SO_ACCEPTFILTER) always returns success on listen socket
even we didn't install accept filter on the socket.
o Fix these bugs and add regression tests for them.
Submitted by: Igor Sysoev [1]
Reviewed by: alfred
MFC after: 2 weeks
so that make(1) will run in an almost clean environment and enhance the
description of the test infrastructure.
Add the ability to have multiple tests carried out per test script.
Give some tests more meaningful names.
Fix the usage message from the test scripts.
Make it possible to pass several commands to the test scripts like:
'sh test.t setup run compare clean'.
shell meta characters it is not passed to the shell, but the command
is executed directly (given that the line is not a shell builtin) and
that the line with a meta character is passed to the shell.
