The clang compiler will optimise these functions down to three AMD64
instructions if the bit argument is a constant during compilation.
MFC after: 1 week
Sponsored by: Mellanox Technologies
When allocating unmapped pages, take advantage of the direct map on
AMD64 to get the virtual address corresponding to a page. Else all
pages allocated must be mapped because sometimes the virtual address
of a page is requested.
Move all page allocation and deallocation code into an own C-file.
Add support for GFP_DMA32, GFP_KERNEL, GFP_ATOMIC and __GFP_ZERO
allocation flags.
Make a clear separation between mapped and unmapped allocations.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
The i915kms driver in Linux 4.9 reimplement parts of the scatter list
functions with regards to performance. In other words there is not so
much room for changing structure layouts and functionality if the
i915kms should be built AS-IS. This patch aligns the scatter list
support to what is expected by the i915kms driver. Remove some
comments not needed while at it.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
1) Add better spinlock debug names when WITNESS_ALL is defined.
2) Make sure that the calling thread gets bound to the current CPU
while a spinlock is locked. Some Linux kernel code depends on that the
CPU ID doesn't change while a spinlock is locked.
3) Add support for using LinuxKPI spinlocks during a panic().
MFC after: 1 week
Sponsored by: Mellanox Technologies
Tasklets are implemented using a taskqueue and a small statemachine on
top. The additional statemachine is required to ensure all LinuxKPI
tasklets get serialized. FreeBSD taskqueues do not guarantee
serialisation of its tasks, except when there is only one worker
thread configured.
MFC after: 1 week
Sponsored by: Mellanox Technologies
A set of helper functions have been added to manage the life of the
LinuxKPI task struct. When an external system call or task is invoked,
a check is made to create the task struct by demand. A thread
destructor callback is registered to free the task struct when a
thread exits to avoid memory leaks.
This change lays the ground for emulating the Linux kernel more
closely which is a dependency by the code using the LinuxKPI APIs.
Add new dedicated td_lkpi_task field has been added to struct thread
instead of abusing td_retval[1].
Fix some header file inclusions to make LINT kernel build properly
after this change.
Bump the __FreeBSD_version to force a rebuild of all kernel modules.
MFC after: 1 week
Sponsored by: Mellanox Technologies
The intended use is to annotate frequently used globals which either rarely
change (and thus can be grouped in the same cacheline) or are an atomic counter
(which means it may benefit from being the only variable in the cacheline).
Linker script support is provided only for amd64. Architectures without it risk
having other variables put in, i.e. as if they were not annotated. This is
harmless from correctness point of view.
Reviewed by: bde (previous version)
MFC after: 1 month
the ones obtained through devclass_get_device(). Some minor code
cleanups while at it.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
Linux list_for_each_entry() does not neccessarily end with the iterator
NULL (it may be an offset from NULL if the list member is not the first
element of the member struct).
Reported by: Coverity
CID: 1366940
Reviewed by: hselasky@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8780
My plan is to change this function's prototype at some point in the
future to add a new label argument, which can be used to export all of
sysctl as metrics that can be scraped by Prometheus. Switch over this
caller to use the macro wrapper counterpart.
conflict with the opensolaris kernel module.
This patch solves a problem where the kernel linker will incorrectly
resolve opensolaris kmem_xxx() functions as linuxkpi ones, which leads
to a panic when these functions are used.
Submitted by: gallatin @
Sponsored by: Mellanox Technologies
MFC after: 1 week
FreeBSD supports lazy allocation of PCI BAR, that is, when a device
driver's attach method is invoked, even if the device's PCI BAR
address wasn't initialized, the invocation of bus_alloc_resource_any()
(the call chain: pci_alloc_resource() -> pci_alloc_multi_resource() ->
pci_reserve_map() -> pci_write_bar()) would allocate a proper address
for the PCI BAR and write this 'lazy allocated' address into the PCI
BAR.
This model works fine for native FreeBSD device drivers, but _not_ for
device drivers shared with Linux (e.g. dev/mlx5/mlx5_core/mlx5_main.c
and ofed/drivers/net/mlx4/main.c. Both of them use
pci_request_regions(), which doesn't work properly with the PCI BAR
lazy allocation, because pci_resource_type() -> _pci_get_rle() always
returns NULL, so pci_request_regions() doesn't have the opportunity to
invoke bus_alloc_resource_any(). We now use pci_find_bar() in
pci_resource_type(), which is able to locate all available PCI BARs
even if some of them will be lazy allocated.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: hps
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8071
Linux module parameters have a permissions value. If any write bits
are set we are allowed to modify the module parameter runtime. Reflect
this when creating the static SYSCTL nodes.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Bool module parameters are no longer supported, because there is no
equivalent in FreeBSD.
There are two macros available which control the behaviour of the
LinuxKPI module parameters:
- LINUXKPI_PARAM_PARENT allows the consumer to set the SYSCTL parent
where the modules parameters will be created.
- LINUXKPI_PARAM_PREFIX defines a parameter name prefix, which is
added to all created module parameters.
Sponsored by: Mellanox Technologies
MFC after: 1 week
run after a panic(). This for example allows a LinuxKPI based graphics
stack to receive prints during a panic.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
at it use NULL for some pointer checks.
Bump the FreeBSD version to force recompilation of all kernel modules
due to a structure size change.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
streamline the rest of the xxx_to_jiffies() functions to have a
constant 64-bit argument and use identical range checks for the
result.
Specifically preserve msecs_to_jiffies(0) returning 0. See r282743 for
further details.
MFC after: 1 week
Sponsored by: Mellanox Technologies
error code checks might fail. ERESTART is in the BSD world defined as
-1. While at it add more Linux error codes.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
Linux requires that all IOCTL data resides in userspace. FreeBSD
always moves the main IOCTL structure into a kernel buffer before
invoking the IOCTL handler and then copies it back into userspace,
before returning. Hide this difference in the "linux_copyin()" and
"linux_copyout()" functions by remapping userspace addresses in the
range from 0x10000 to 0x20000, to the kernel IOCTL data buffer.
It is assumed that the userspace code, data and stack segments starts
no lower than memory address 0x400000, which is also stated by "man 1
ld", which means any valid userspace pointer can be passed to regular
LinuxKPI handled IOCTLs.
Bump the FreeBSD version to force recompilation of all kernel modules.
Discussed with: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
"current" inside all LinuxKPI file operation callbacks. The "current"
is frequently used for various debug prints, printing the thread name
and thread ID for example.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
This is kinda critical to the performance when the CPU is slow and
network bandwidth is high, e.g. in the hypervisor.
Reviewed by: rrs, gallatin, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5765
- Add some new hlist macros.
- Update existing hlist macros removing the need for a temporary
iteration variable.
- Properly define the RCU hlist macros to be SMP safe with regard
to RCU.
- Safe list macro arguments by adding a pair of parentheses.
- Prefix the _list_add() and _list_splice() functions with "linux"
to reflect they are LinuxKPI internal functions.
Obtained from: Linux
MFC after: 1 week
Sponsored by: Mellanox Technologies
idr_alloc_cyclic() in the LinuxKPI. Bump the FreeBSD version to
force recompilation of all KLDs due to IDR structure size change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
LinuxKPI. Fix a few spaces to tabs. Bump the FreeBSD version to force
recompilation of existing KMODs.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Properly prefix internal functions with "linux_" instead of only a
single underscore to avoid future namespace collisions.
- Make some functions global instead of inline to ease debugging and
to avoid unnecessary code duplication.
- Remove no longer existing kthread_create() function's prototype.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Declare some static functions in linux_compat.c instead if inside
various header files.
- Prefix FreeBSD local functions in the LinuxKPI with "linux_" to
avoid symbol name conflicts in the future and to make debugging
easier.
- Make the "struct kobj_ktype" declaractions constant to shave off a
few bytes from the data segment.
MFC after: 1 week
Sponsored by: Mellanox Technologies
LinuxKPI. Compute string length before allocating memory instead of
using fixed size allocations. Make kobject_set_name_vargs() global
instead of inline to save some bytes when compiling.
MFC after: 1 week
Sponsored by: Mellanox Technologies
from taskqueue_enqueue() instead of reading "ta_pending" unlocked and
also ensure the callout is stopped before proceeding.
MFC after: 1 week
Sponsored by: Mellanox Technologies
