Commit Graph

157 Commits

Author SHA1 Message Date
Takanori Watanabe
3e7c5fe5b9 Add ALPS glide point ID and some compatibility IDs.
PR: kern/75008
2006-03-15 07:04:33 +00:00
Jean-Sébastien Pédron
dcde7cd573 Fix a bug in Synaptics Touchapd support where psm(4) will enter an infinite
loop if it receives an out of sync packet.

Reviewed by:	mux (mentor)
MFC after:	4 days
2006-01-05 19:24:01 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
Marius Strobl
520b635320 - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source
files after they were repo-copied to sys/dev/atkbdc. The sources of
  atkbdc(4) and its children were moved to the new location in preparation
  for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in
  order to not further scatter them over the whole tree which would have
  been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another
  reason for the repo-copies was that some of the sources were misfiled,
  e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging
  atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly.
  Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't
  ISA-specific.
- Separate the parts of atkbdc_isa.c which aren't actually ISA-specific
  but are shareable between different atkbdc(4) bus front-ends into
  atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use
  bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource()
  respectively in atkbdc_isa.c instead of rolling own versions.
- Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for
  atkbdc(4). PS/2 controllers and input devices are used on a couple of
  Sun OEM boards and occur on either the EBus or the ISA bus. Depending on
  the board it's either the only on-board mean to connect a keyboard and
  mouse or an alternative to either RS232 or USB devices.
- Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled
  without isa(4) (e.g. for EBus-only machines). This ISA-specific part
  isn't separated into its own source file, yet, as it requires more work
  than was feasible for 6.0 in order to do it in a clean way. Actually
  philip@ is working on a rewrite of psm(4) so a more comprehensive
  clean-up and separation of hardware dependent and independent parts is
  expected to happen after 6.0.

Tested on:	i386, sparc64 (AX1105, AXe and AXi boards)
Reviewed by:	philip
2005-06-10 20:56:38 +00:00
Marius Strobl
c016761c5e Delete a file that was meant to be renamed while repo-copying it but
wasn't and now is superfluous.
2005-06-10 17:36:34 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Maxim Sobolev
0e9502aaaa Backout previous diffs - this functionality is already provided by the
hints to the atkbd(4).

PR:
Submitted by:   jhb
2005-04-07 23:59:37 +00:00
Maxim Sobolev
7ca67a6885 Make previous commit actually working by replacing TUNABLE_INT() with
TUNABLE_INT_FETCH(). Apparently keyboard init is performed earlier
in the boot process than fetching all static tunables.

MFC after:	1 day
2005-04-07 18:18:17 +00:00
Maxim Sobolev
9ec4f9e385 Provide a new tunable hw.atkbdc.broken_kit_cmd, which if set to 1
instructs the driver to avoid using Keyboard Interface Test command.
This command causes problems with some non-compliant hardware, resulting
in machine being abruptly powered down early in the boot process.

Particularly it's known that HP ZV5000 and Compaq R3000Z notebooks
are affected by this problem.

Due to popularity of those models this patch is good MFC5.4 candidate.

PR:		67745
Submitted by:	Jung-uk Kim jkim at niksun.com
MFC after:	1 days
2005-04-07 17:15:10 +00:00
Sam Leffler
ff69096233 plug memory leak
Noticed by:	Coverity Prevent analysis tool
2005-02-26 18:55:53 +00:00
Philip Paeps
df616c9022 Make life for owners of Synaptics Touchpads more pleasant :-)
o Implement a shiny new algorithm to keep track of finger movement at
   slow speeds.  This dramatically reduces the level of questionable
   language from users trying to resize windows.

 o Properly catch the many extra buttons and dials which manufacturers
   are known to screw onto Synaptics touchpad controllers.  Currently,
   up to seven buttons are known to work, more should work too.

 o Add a number of sysctls allowing one to tune the driver to taste in
   a simple way:

     # Should the extra buttons act as axes or as middle button
     hw.psm.synaptics.directional_scrolls

     # These control the 'stickiness' at low speeds
     hw.psm.synaptics.low_speed_threshold
     hw.psm.synaptics.min_movement
     hw.psm.synaptics.squelch_level

PR:		kern/75725
Submitted by:	Jason Kuri <jay@oneway.com>
MFC after:	1 month
2005-01-10 13:05:58 +00:00
Philip Paeps
9fd851bb17 Reduce diffs to work in progress before checking in serious changes.
o Move the sysctls under debug.psm.* and hw.psm.* making them a bit
   clearer and more consistent with other drivers.

 o Remove the debug.psm_soft_timeout sysctl.  It was introduced many
   moons ago in r1.64 but never referenced anywhere.

 o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control
   the behaviour of taps on touchpads.  People might like to fiddle
   with these if tapping seems to slow or too fast for them.

 o Add debug.psm.loglevel as a tunable so that verbosity can be set
   easily at boot-time (to watch probes and such) without having to
   compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
John Baldwin
f5517dc887 Add a new flag to the atkbd(4) driver to disable testing the keyboard
port during the device probe as this can cause hangs on some machines,
specifically Compaq R3000Z series amd64 laptops.  The flag is bit 3, or
0x8.

PR:		amd64/67745
Reported by:	Neil Winterbauer newntrbr at ucla dot edu, many others
Tested by:	ade, astrodog at gmail dot com, many others
MFC after:	1 week
2004-12-15 23:00:47 +00:00
Nate Lawson
e5979322ba Remove local hacks to set flags now that the device probe does this for us.
Tested on every device except sio_pci and the pc98 fd.c.  Perhaps something
similar should be done for the "disabled" hints also.

MFC after:	2 weeks
2004-10-14 22:21:59 +00:00
Philip Paeps
34ed91b45b Introduce a tunable to disable support for Synaptics touchpads. A number of
people have reported problems (stickyness, aiming difficulty) which is proving
difficult to fix, so this will default to disable until sometime after 5.3R.

To enable Synaptics support, set the 'hw.psm.synaptics_support=1' tunable.

MT5 candidate.

Approved by:	njl
2004-09-29 23:49:57 +00:00
Justin T. Gibbs
5fb0f52712 Improve sync recovery algorithm:
o Remove PSM_SYNCERR_THRESHOLD1.  This value specified how many sync
   errors were required before the mouse is re-initialised.
   Re-initialisation is now done after (packetsize * 2) sync errors as
   things aren't likely to improve after that.

 o Reset lastinputerror when re-initialisation occurs.  We don't want
   to continue to drop data after re-initialisation.

 o Count the number of failed packets independently of the syncerrors
   statistic.  syncerrors is useful for recovering sync within a single
   packet.  pkterrors allows us to detect when the mouse changes its
   packet mode due to some external event (e.g. KVM switch).

 o Reinitialize the mouse if we see more than psmpkterrthresh errors
   during the validation period.  The validation period begins as soon
   as a sync error is detected and continues until psmerrsecs/msecs
   time has elapsed.  The defaults for these two values force a reset
   if we see two packet errors in a 2 second period.  This allows rapid
   detection of packet framing errors caused by the mouse changing packet
   modes.

 o Export psmpkterrthresh as a sysctl

 o Export psmloglevel as a sysctl.

 o Enable more debugging code to be enabled at runtime via psmloglevel.

 o Simplify verbose conditioned loging by using a VLOG macro.

 o Add several comments describing the sync recovery algorithm of
   this driver.

Large Portions by: Brian Somers <brian@Awfulhak.org>
Inspired and Frustrated by: Belkin KVMs
Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
Justin T. Gibbs
e55a65d092 Defer the capture of the "expected sync bits" until the first "normal"
data packet is received from the mouse.  In the case of many KVM's,
this avoids a bug in their mouse emulation that sends back incorrect
sync when you explicitly request a data packet from the mouse.  Without
this change, you must force the driver into stock PS/2 mode or be flooded
with a never ending stream of "out of sync" messages on these KVMs.

Approved by: re
2004-08-17 18:12:37 +00:00
Philip Paeps
5459a0063b Don't initialize static variables to 0 (C should just take care of that).
Spotted by:	njl
2004-08-16 20:19:09 +00:00
Philip Paeps
8547e74f4f Update support for Synaptics Touchpads (Volume V)
o Add (long awaited) support for guest devices

Submitted by:	Arne Schwabe <arne@rfc2549.org>
Approved by:	njl (in a former revision)
2004-08-16 16:28:27 +00:00
Philip Paeps
c4dbfe3893 Assume a finger of regular width when no width value is reported by
the touchpad (which happens when it has no extended capabilities).

Spotted by:	dhw
Forgotten by:	philip
2004-08-08 01:26:00 +00:00
Philip Paeps
1b5dd3aee5 Update support for Synaptics Touchpads (Volume IV)
o Change the motion calculation to result in
   a more reasonable speed of motion

This should fix the 'aiming' problems people have reported.  It also
mitigates (but doesn't completely solve) the 'stalling' problems at
very low speeds.

Tested by:	many subscribers to -current
Approved by:	njl
2004-08-08 01:10:23 +00:00
Philip Paeps
bc1418f61c Update support for Synaptics Touchpads (Volume III)
o Catch 'taps' as button presses

 o One finger sends button1, two fingers send button3,
   three fingers send button2 (double-click)

Tested by:	many subscribers to -current
Approved by:	njl
2004-08-08 01:00:31 +00:00
Philip Paeps
7589cb5cae Update support for Synaptics Touchpads (Volume II)
o Handle the 'up/down' buttons some touchpads have as
   a z-axis (scrollwheel) as recommended by the specs

 o Report the buttons as button4 and button5 instead
   of button2 and button4, button2 can be emulated by
   pressing button1 and button3 simultaneously.  This
   allows one to use the two extra buttons for other
   purposes if one so desires.

Tested by:	many subscribers to -current
Approved by:	njl
2004-08-08 00:57:07 +00:00
Philip Paeps
4079d722ac Update support for Synaptics Touchpads (Volume I)
o Clean up whitespace and comments in the
   enable_synaptics() probing function

 o Only use (and rely on) the extended capability
   bits when we are told they actually exist

 o Partly ignore the (possibly dated?) part of the
   specification about the mode byte so that we
   can support 'guest devices' too.

Tested by:	many subscribers to -current
Approved by:	njl
2004-08-08 00:52:11 +00:00
Nate Lawson
a4cdf60c7d Add support for the Synaptics Touchpad mouse driver. I reworked the
submitted version with style cleanups and changes to comments.  I also
modified the ioctl interface.  This version only has one ioctl (to get
the Synaptics-specific config parameters) since this is the only
information a user might want.

Submitted by:	Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Maxime Henrion
d49311a74f Ignore more strange return values of the test_aux_port() function,
because some notebooks (apparently Compaq, Toshiba and Acer ones)
erroneously return 2 or 3 there.

PR:		kern/61482, kern/54188
Submitted by:	Ulf Lilleengen <lulf@kerneled.org>,
		Victor Balada Diaz <victor@alf.dyndns.ws>
MFC after:	3 days
2004-07-16 22:04:29 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
John Baldwin
092a5c4530 Remove atdevbase and replace it's remaining uses with direct references to
KERNBASE instead.
2004-06-10 20:31:00 +00:00
Poul-Henning Kamp
5dba30f15a add missing #include <sys/module.h> 2004-05-30 20:27:19 +00:00
Maxime Henrion
0335702b9f Don't check for device_get_softc() returning NULL, it can't happen. 2004-04-17 10:25:04 +00:00
Mark Murray
44e421c906 Put a bunch of output that us really only useful in a debug
scenario into #ifdef DEBUG. This makes my cluster with Belkin
KVM switch completely usable, even if the KVM switch and mouse
get a bit confused sometimes.

Without this, when the mouse gets confused, all sorts of crud
gets spammed all over the screen. With this, the mouse may appear
dead for a second or three, but it recovers silently.
2004-04-04 16:36:21 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
Alfred Perlstein
de75fd6d2b Significantly reduce the "jitter" that is typical for PS/2 mice
when using a KVM.

There is no actual solution possible, but this gets us pretty close.

Typically when switching back to a FreeBSD box and moving the mouse
wild data is produced, because the protocol's validation/checksum
system is extremely weak it is impossible to determine that we're
out of sync before dropping several bogus packets to user land.

The actual solution that appears to offer the best clamping of
jitter is to buffer the mouse packets if we've not seen mouse
activity for more than .5 seconds.  Then waiting to flush that data
for 1/20th of a second.  If within that 20th of a second we get any
packets that do fail the weak test we drop the entire queue and
back off accepting data from the mouse for 2 seconds and then repeat
the whole deal.

You can still get _some_ jitter, notably if you switch to the FreeBSD
box, then move the mouse just enough to generate one or two packets.
Those packets may be bogus, but may still pass the validity check.

One way to finally kill the problem once and for all is to check
the initial packets for "wild" values.  Typically one sees packets
in the +/-60 range during normal operation, however when bogus data
is generated it's typically near the outer range of +/-120 or more,
those packets would be a good candidate for dropping or clamping.

I've been running with this for several weeks now and it has
significantly helped me stay sane even with a piece of junk Belkin
KVM causing wild jitter each and every time I switch.

Lastly I'd like to note that my experience with Windows shows me that
somehow the Microsoft PS/2 driver typically avoids this problem, but
that may only be possible when running the mouse in a dumb-ed down PS/2
mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
Seigo Tanimura
512824f8f7 - Implement selwakeuppri() which allows raising the priority of a
thread being waken up.  The thread waken up can run at a priority as
  high as after tsleep().

- Replace selwakeup()s with selwakeuppri()s and pass appropriate
  priorities.

- Add cv_broadcastpri() which raises the priority of the broadcast
  threads.  Used by selwakeuppri() if collision occurs.

Not objected in:	-arch, -current
2003-11-09 09:17:26 +00:00
Max Khon
7ea199a777 Assign keycodes for Power, Sleep and Wake keys.
Submitted by:	Eugene Grosbein <eugen@grosbein.pp.ru>
2003-10-07 09:21:59 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Hidetoshi Shimokawa
8ce4e5189e Fix for FAIL_IF_NO_KBD case as expected.
Even if we have no AT keyboard, an AT keyboard is registered because
it's probed with KB_CONF_PROBE_ONLY flag set during console initialization.
Unregister the keyboard if it doesn't present while second probe.

This should fix USB keyboard only case without 'kbdcontrol -k /dev/kbd1'.
2003-07-13 10:08:33 +00:00
Mike Heffner
e0c22597cb Add support for the A4 Tech RFSW-35 mouse wheel. Probe is similar to
4D Plus.

PR:		44333
2003-07-12 18:36:04 +00:00
Mike Heffner
b1181a94a3 Reset the PSM aux device twice to help pierce through some KVM's to
get the correct data from the attached mouse. Multiple resets should
be harmless, but just in case, the second one is non-fatal and is just
ignored.
2003-07-07 05:40:13 +00:00
John Baldwin
8a9bc9c03b - Use the new resource_disabled() helper function to see if devices are
disabled.
- Change the apm driver to match the acpi driver's behavior by checking to
  see if the device is disabled in the identify routine instead of in the
  probe routine.  This way if the device is disabled it is never created.

Note that a few places (ips(4), Alpha SMP) used "disable" instead of
"disabled" for their hint names, and these hints must be changed to
"disabled".  If this is a big problem, resource_disabled() can always be
changed to honor both names.
2003-07-02 16:09:02 +00:00
Mike Heffner
6d1c16554d Add PnP PS/2 id for Dell Latitude X200.
PR:		48516
MFC after:	2 weeks
2003-07-01 14:41:16 +00:00
David E. O'Brien
8c9bbf484a Use __FBSDID(). 2003-06-11 00:34:37 +00:00
Poul-Henning Kamp
a3e7d3f16f wrap macro in do {...} while(0) 2003-05-31 21:11:51 +00:00
Poul-Henning Kamp
9d4b1fa40e Remove extra ';'
Found by:       FlexeLint
2003-05-31 18:37:30 +00:00
Peter Wemm
e9b193dc33 AMD64 physical space is much larger than i386, de-i386 the bus_space and
bus_dma MD code for AMD64.  (And a trivial ifdef update in dev/kbd because
of this).  More updates are needed here to take advantage of the 64 bit
instructions.

Approved by:	re (blanket amd64/*)
2003-05-12 02:44:37 +00:00
Peter Wemm
25b0a17506 Update the hardcoded bus tags for early console support for amd64. 2003-05-01 04:19:19 +00:00
Mark Murray
51da11a27a Fix some easy, global, lint warnings. In most cases, this means
making some local variables static. In a couple of cases, this means
removing an unused variable.
2003-04-30 12:57:40 +00:00
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00