Commit Graph

50 Commits

Author SHA1 Message Date
Alexander Motin
9ff8b70ded Update QLogic ISP 24xx/25xx chips firmware to 8.07.00.
MFC after:	1 month
2018-03-02 19:50:41 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Alexander Motin
2b2f4008d0 Update 25xx chips firmware from 7.03.00 to 8.03.00.
While the same update is also available for 24xx chips, it seems have
a problem with disabling virtual ports -- firmware handles the request,
but does not respong on it, causing timeout in driver.

MFC after:	1 month
2016-04-11 10:53:25 +00:00
Alexander Motin
3e6deb330e Rip off target mode support for parallel SCSI QLogic adapters.
Hacks to enable target mode there complicated code, while didn't really
work.  And for outdated hardware fixing it is not really interesting.

Initiator mode tested with Qlogic 1080 adapter is still working fine.
2015-11-23 10:06:19 +00:00
Alexander Motin
070d1d2f21 Update Qlogic 23XX firmware from 3.03.26 to 3.03.28 2015-11-21 20:52:40 +00:00
Alexander Motin
e7b34bf406 Update firmware for QLogic 22xx from 2.02.06 to 2.02.08. 2015-11-21 14:39:57 +00:00
Alexander Motin
ed8ba339fe Remove residual verbosity.
firmware_register() already reports errors.
2015-10-22 15:13:47 +00:00
Alexander Motin
21c2207ffc Update firmware images for Qlogic 24xx/25xx from 5.5.0 to 7.3.0.
This also removes separate "_multi" images, since this funcationality is
now in base, and there is simply no new images without it for years.
2015-10-20 12:27:59 +00:00
Matt Jacob
a71ab52c9e Switch to using FC-Tape firmware.
Sponsered by:	Spectralogic
MFC after:	1 week
2012-07-26 13:58:43 +00:00
Matt Jacob
061b8865d1 Roll to the latest 2400/2500 firmware available from the public QLogic
website.

Sponsored by: Spectralogic
MFC after:	1 week
2012-06-17 21:47:24 +00:00
Matt Jacob
0fa61e2f67 Update firmware to more recent versions.
MFC after:	3 months
2011-01-05 23:15:22 +00:00
Maxim Sobolev
e9f3a15d63 Don't spam dmesg with "registered firmware ..." when module is compiled
into kernel, unless there is a verbose boot flag set.  There is no real
need to have this information printed.

MFC after:	1 week
2010-03-05 03:37:42 +00:00
Matt Jacob
b965588786 Add 8Gb card firmware. Update some 2Gb and 4Gb f/w sets.
Split 4Gb and 8Gb into pieces that can be either multi_id
capable or not.

Reviewed by:	scottl, ken
Approved by:	re
2009-08-01 00:57:34 +00:00
Jung-uk Kim
e8976a6d64 Make ispfw(4) play nice with individual firmware modules.
- Do not let individual KLD module unregister firmware image loaded by ispfw
or vice versa.
- Make 'kldunload ispfw' actually unregister all firmware images loaded by
ispfw, not just 'isp_1040'.
- Print which KLD module actually loaded the firmware image.
- Remove unused return value from do_load_fw() and do_unload_fw() and remove
duplicate sys/param.h while I am here.
2008-11-11 00:14:10 +00:00
Matt Jacob
f334280581 The MODULE_NAME should "ispfw" unless overriden, not "isp". 2006-12-10 03:42:57 +00:00
Matt Jacob
98981e638f Use 2K Login f/w. 2006-11-02 03:23:01 +00:00
Matt Jacob
9b2027cec5 Add QLogic 2400 (4Gb) firmware. 2006-08-26 18:39:18 +00:00
Matt Jacob
9a5af41076 Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.

Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.

However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.

For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.

This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.

We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).

Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after:	2 months
2006-07-09 17:50:20 +00:00
Matt Jacob
fb37290079 Add 2322 firmware. 2006-07-03 08:22:09 +00:00
Matt Jacob
5b9fdd582c Update 2300 f/w. This will probably be the last
update here before we switch to the new f/w loading
framework.
2006-04-18 21:55:30 +00:00
Ruslan Ermilov
4cbc44fb19 Fix -Wunder and make the sbus code really compile only on sparc64. 2005-12-04 10:03:00 +00:00
Matt Jacob
f3f3654d48 Roll firmware to the latest version. There are a bunch of features
in alternate f/w versions that will be pursued at some points.

MFC after:	1 month
2005-01-29 01:12:37 +00:00
Matt Jacob
796a9ee342 Remember to snag firmware for the DELL OEM (6312) card
MFC after:	2 days
2005-01-23 06:37:28 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Poul-Henning Kamp
3e019deaed Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
David E. O'Brien
e68f77a69e Fix $FreeBSD$.
Reported by:	Daniel O'Connor <doconnor@gsoft.com.au>
2004-03-21 18:16:49 +00:00
Matt Jacob
58feac18f2 Update firmware sets for the 12160, 2200 and 2300 cards to the (more or
less) latest from QLogic.
2004-01-14 18:38:03 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Matt Jacob
a5cf62c2b3 Roll to latest level. 2003-02-16 01:30:31 +00:00
Matt Jacob
2e6d3b4614 Know that a 10160 is the same as a 12160.
MFC after:	0 days
2002-10-12 00:12:31 +00:00
Matt Jacob
63872bc9c5 Get the most recent 2300 f/w that's on the QLogic intranet- fixes lots
of buglets and quite a few bugs.

MFC after:	1 day
2002-10-10 17:30:06 +00:00
Matt Jacob
55d03500b3 Upgrade to latest QLogic f/w from their intranet site for 2100, 2200 and
2300 cards.

MFC after:	1 day
2002-09-01 02:28:36 +00:00
Matt Jacob
74496412c4 Add SBus firmware (compiled in only for sparc systems). 2002-07-11 01:55:15 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Matt Jacob
d9f1ea7b2b Roll to latest production level firmware.
MFC after:	1 day
2002-01-23 06:42:54 +00:00
Matt Jacob
5b7cc8d153 Roll firmware to latest offerings... Fixes a number of f/w related
bugs.

MFC after:	1 week
2001-12-13 00:09:06 +00:00
Matt Jacob
d7ae92aeb3 Update to latest 12160 f/w.
MFC after:	1 week
2001-10-20 21:47:58 +00:00
Matt Jacob
a2f1799115 Add 2300/2312 (2Gbit) firmware. 2001-08-31 21:25:15 +00:00
Matt Jacob
bfc656f6d4 update to latest and greatest f/w 2001-02-11 03:35:45 +00:00
Matt Jacob
355981d7c6 roll to 2.01.26 level 2000-12-28 23:23:28 +00:00
Matt Jacob
932269b52e remove MAINTAINER file 2000-12-28 23:23:11 +00:00
Matt Jacob
aa57fd6fa5 some copyright cleanups 2000-09-21 20:16:04 +00:00
Matt Jacob
d33f5e590e remove unneeded includes
(obtained from phk@freebsd.org)
2000-09-21 16:32:38 +00:00
Matt Jacob
a4de02ec12 Roll back target mode f/w to 7.55- 7.65 hangs when presented with a
non-disconnecting command. Interestingly enough, of the other flavors
of the 7.65 f/w (the dual-id and multi-id flavor)- the dual-id doesn't
hang (they're also supposed to be the same except for supporting dual
or multi-id capture!), but other things are questionable as well.
2000-07-17 00:34:52 +00:00
Matt Jacob
9678910bae A side effect of new 12160 f/w- there is only one set whether target
mode enabled or not now (like the FC cards).
2000-07-04 02:06:00 +00:00
Matt Jacob
99af801d6b roll new Qlogic 2200 firmware in place 2000-07-04 02:05:13 +00:00
Matt Jacob
8c4eab6214 roll new Qlogic 2100 firmware in place 2000-07-04 02:04:48 +00:00
Matt Jacob
615493f292 roll new 12160.h firmware in place 2000-07-04 02:04:24 +00:00
Matt Jacob
aae4f8bb77 Add in (separate files for different board's firmware) new files for ispfw
loadable module.
2000-06-18 04:37:44 +00:00