provided access to the root file system before the start of the
init process. This was used briefly by SEBSD before it knew about
preloading data in the loader, and using that method to gain
access to data earlier results in fewer inconsistencies in the
approach. Policy modules still have access to the root file system
creation event through the mac_create_mount() entry point.
Removed now, and will be removed from RELENG_6, in order to gain
third party policy dependencies on the entry point for the lifetime
of the 6.x branch.
MFC after: 3 days
Submitted by: Chris Vance <Christopher dot Vance at SPARTA dot com>
Sponsored by: SPARTA
process that caused the clone event to take place for the device driver
creating the device. This allows cloned device drivers to adapt the
device node based on security aspects of the process, such as the uid,
gid, and MAC label.
- Add a cred reference to struct cdev, so that when a device node is
instantiated as a vnode, the cloning credential can be exposed to
MAC.
- Add make_dev_cred(), a version of make_dev() that additionally
accepts the credential to stick in the struct cdev. Implement it and
make_dev() in terms of a back-end make_dev_credv().
- Add a new event handler, dev_clone_cred, which can be registered to
receive the credential instead of dev_clone, if desired.
- Modify the MAC entry point mac_create_devfs_device() to accept an
optional credential pointer (may be NULL), so that MAC policies can
inspect and act on the label or other elements of the credential
when initializing the skeleton device protections.
- Modify tty_pty.c to register clone_dev_cred and invoke make_dev_cred(),
so that the pty clone credential is exposed to the MAC Framework.
While currently primarily focussed on MAC policies, this change is also
a prerequisite for changes to allow ptys to be instantiated with the UID
of the process looking up the pty. This requires further changes to the
pty driver -- in particular, to immediately recycle pty nodes on last
close so that the credential-related state can be recreated on next
lookup.
Submitted by: Andrew Reisse <andrew.reisse@sparta.com>
Obtained from: TrustedBSD Project
Sponsored by: SPAWAR, SPARTA
MFC after: 1 week
MFC note: Merge to 6.x, but not 5.x for ABI reasons
redundant with respect to existing mbuf copy label routines. Expose
a new mac_copy_mbuf() routine at the top end of the Framework and
use that; use the existing mpo_copy_mbuf_label() routine on the
bottom end.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, SPAWAR
Approved by: re (scottl)
which is invoked from socket() and socketpair(), permitting MAC
policy modules to control the creation of sockets by domain, type, and
protocol.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, SPAWAR
Approved by: re (scottl)
Requested by: SCC
points to convert _sema() to _sem() for consistency purposes with
respect to the other semaphore-related entry points:
mac_init_sysv_sema() -> mac_init_sysv_sem()
mac_destroy_sysv_sem() -> mac_destroy_sysv_sem()
mac_create_sysv_sema() -> mac_create_sysv_sem()
mac_cleanup_sysv_sema() -> mac_cleanup_sysv_sem()
Congruent changes are made to the policy interface to support this.
Obtained from: TrustedBSD Project
Sponsored by: SPAWAR, SPARTA
access to POSIX Semaphores:
mac_init_posix_sem() Initialize label for POSIX semaphore
mac_create_posix_sem() Create POSIX semaphore
mac_destroy_posix_sem() Destroy POSIX semaphore
mac_check_posix_sem_destroy() Check whether semaphore may be destroyed
mac_check_posix_sem_getvalue() Check whether semaphore may be queried
mac_check_possix_sem_open() Check whether semaphore may be opened
mac_check_posix_sem_post() Check whether semaphore may be posted to
mac_check_posix_sem_unlink() Check whether semaphore may be unlinked
mac_check_posix_sem_wait() Check whether may wait on semaphore
Update Biba, MLS, Stub, and Test policies to implement these entry points.
For information flow policies, most semaphore operations are effectively
read/write.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Sponsored by: DARPA, McAfee, SPARTA
Obtained from: TrustedBSD Project
mac_check_proc_wait(), which control the ability to wait4() specific
processes. This permits MAC policies to limit information flow from
children that have changed label, although has to be handled carefully
due to common programming expectations regarding the behavior of
wait4(). The cr_seeotheruids() check in p_canwait() is #if 0'd for
this reason.
The mac_stub and mac_test policies are updated to reflect these new
entry points.
Sponsored by: SPAWAR, SPARTA
Obtained from: TrustedBSD Project
control socket poll() (select()), fstat(), and accept() operations,
required for some policies:
poll() mac_check_socket_poll()
fstat() mac_check_socket_stat()
accept() mac_check_socket_accept()
Update mac_stub and mac_test policies to be aware of these entry points.
While here, add missing entry point implementations for:
mac_stub.c stub_check_socket_receive()
mac_stub.c stub_check_socket_send()
mac_test.c mac_test_check_socket_send()
mac_test.c mac_test_check_socket_visible()
Obtained from: TrustedBSD Project
Sponsored by: SPAWAR, SPARTA
of system calls to manipulate elements of the process credential,
including:
setuid() mac_check_proc_setuid()
seteuid() mac_check_proc_seteuid()
setgid() mac_check_proc_setgid()
setegid() mac_check_proc_setegid()
setgroups() mac_check_proc_setgroups()
setreuid() mac_check_proc_setreuid()
setregid() mac_check_proc_setregid()
setresuid() mac_check_proc_setresuid()
setresgid() mac_check_rpoc_setresgid()
MAC checks are performed before other existing security checks; both
current credential and intended modifications are passed as arguments
to the entry points. The mac_test and mac_stub policies are updated.
Submitted by: Samy Al Bahra <samy@kerneled.org>
Obtained from: TrustedBSD Project
MAP_SHARED so that the entry point gets executed un-conditionally.
This may be useful for security policies which want to perform access
control checks around run-time linking.
-add the mmap(2) flags argument to the check_vnode_mmap entry point
so that we can make access control decisions based on the type of
mapped object.
-update any dependent API around this parameter addition such as
function prototype modifications, entry point parameter additions
and the inclusion of sys/mman.h header file.
-Change the MLS, BIBA and LOMAC security policies so that subject
domination routines are not executed unless the type of mapping is
shared. This is done to maintain compatibility between the old
vm_mmap_vnode(9) and these policies.
Reviewed by: rwatson
MFC after: 1 month
network interfaces. This global mutex will protect all ifnet labels.
Acquire the mutex across various MAC activities on interfaces, such
as security checks, propagating interface labels to mbufs generated
from the interface, retrieving and setting the interface label.
Introduce mpo_copy_ifnet_label MAC policy entry point to copy the
value of an interface label from one label to another. Use this
to avoid performing a label externalize while holding mac_ifnet_mtx;
copy the label to a temporary ifnet label and then externalize that.
Implement mpo_copy_ifnet_label for various MAC policies that
implement interface labeling using generic label copying routines.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, McAfee Research
Now I believe it is done in the right way.
Removed some XXMAC cases, we now assume 'high' integrity level for all
sysctls, except those with CTLFLAG_ANYBODY flag set. No more magic.
Reviewed by: rwatson
Approved by: rwatson, scottl (mentor)
Tested with: LINT (compilation), mac_biba(4) (functionality)
to use the "year1-year3" format, as opposed to "year1, year2, year3".
This seems to make lawyers more happy, but also prevents the
lines from getting excessively long as the years start to add up.
Suggested by: imp
wait, rather than the socket label. This avoids reaching up to
the socket layer during connection close, which requires locking
changes. To do this, introduce MAC Framework entry point
mac_create_mbuf_from_inpcb(), which is called from tcp_twrespond()
instead of calling mac_create_mbuf_from_socket() or
mac_create_mbuf_netlayer(). Introduce MAC Policy entry point
mpo_create_mbuf_from_inpcb(), and implementations for various
policies, which generally just copy label data from the inpcb to
the mbuf. Assert the inpcb lock in the entry point since we
require consistency for the inpcb label reference.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
and the mpo_create_cred() MAC policy entry point to
mpo_copy_cred_label(). This is more consistent with similar entry
points for creation and label copying, as mac_create_cred() was
called from crdup() as opposed to during process creation. For
a number of policies, this removes the requirement for special
handling when copying credential labels, and improves consistency.
Approved by: re (scottl)
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
the MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols. This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.
This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.
For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks. Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.
Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.
Reviewed by: sam, bms
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
system calls, and prefer these calls over getsockopt()/setsockopt()
for ABI reasons. When addressing UNIX domain sockets, these calls
retrieve and modify the socket label, not the label of the
rendezvous vnode.
- Create mac_copy_socket_label() entry point based on
mac_copy_pipe_label() entry point, intended to copy the socket
label into temporary storage that doesn't require a socket lock
to be held (currently Giant).
- Implement mac_copy_socket_label() for various policies.
- Expose socket label allocation, free, internalize, externalize
entry points as non-static from mac_net.c.
- Use mac_socket_label_set() in __mac_set_fd().
MAC-aware applications may now use mac_get_fd(), mac_set_fd(), and
mac_get_peer() to retrieve and set various socket labels without
directly invoking the getsockopt() interface.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
mac_stub policy and no longer mac_none (as found in the repocopy).
Add comment to this effect.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
the MAC policy modules to improve robustness against C string
bugs and vulnerabilities. Following these revisions, all
string construction of labels for export to userspace (or
elsewhere) is performed using the sbuf API, which prevents
the consumer from having to perform laborious and intricate
pointer and buffer checks. This substantially simplifies
the externalization logic, both at the MAC Framework level,
and in individual policies; this becomes especially useful
when policies export more complex label data, such as with
compartments in Biba and MLS.
Bundled in here are some other minor fixes associated with
externalization: including avoiding malloc while holding the
process mutex in mac_lomac, and hence avoid a failure mode
when printing labels during a downgrade operation due to
the removal of the M_NOWAIT case.
This has been running in the MAC development tree for about
three weeks without problems.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
the vendor is only included in the long name currently, reducing
verbosity when modules are registered and unregistered.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
additional flags argument to indicate blocking disposition, and
pass in M_NOWAIT from the IP reassembly code to indicate that
blocking is not OK when labeling a new IP fragment reassembly
queue. This should eliminate some of the WITNESS warnings that
have started popping up since fine-grained IP stack locking
started going in; if memory allocation fails, the creation of
the fragment queue will be aborted.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
kernel, you should expect them to do something, so now they do. This
doesn't affect users who don't load or explicitly compile in the
policies.
Approved by: re (jhb)
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
unused. Replace it with a dm_mount back-pointer to the struct mount
that the devfs_mount is associated with. Export that pointer to MAC
Framework entry points, where all current policies don't use the
pointer. This permits the SEBSD port of SELinux's FLASK/TE to compile
out-of-the-box on 5.0-CURRENT with full file system labeling support.
Approved by: re (murray)
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
we brought in the new cache and locking model for vnode labels. We
now rely on mac_associate_devfs_vnode().
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
structure definition, rather than using an operation vector
we translate into the structure. Originally, we used a vector
for two reasons:
(1) We wanted to define the structure sparsely, which wasn't
supported by the C compiler for structures. For a policy
with five entry points, you don't want to have to stick in
a few hundred NULL function pointers.
(2) We thought it would improve ABI compatibility allowing modules
to work with kernels that had a superset of the entry points
defined in the module, even if the kernel had changed its
entry point set.
Both of these no longer apply:
(1) C99 gives us a way to sparsely define a static structure.
(2) The ABI problems existed anyway, due to enumeration numbers,
argument changes, and semantic mismatches. Since the going
rule for FreeBSD is that you really need your modules to
pretty closely match your kernel, it's not worth the
complexity.
This submit eliminates the operation vector, dynamic allocation
of the operation structure, copying of the vector to the
structure, and redoes the vectors in each policy to direct
structure definitions. One enourmous benefit of this change
is that we now get decent type checking on policy entry point
implementation arguments.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
MAC access() and open() checks, the argument actually has an int type
where it becomes available. Switch to using 'int' for the mode argument
throughout the MAC Framework and policy modules.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
"refreshing" the label on the vnode before use, just get the label
right from inception. For single-label file systems, set the label
in the generic VFS getnewvnode() code; for multi-label file systems,
leave the labeling up to the file system. With UFS1/2, this means
reading the extended attribute during vfs_vget() as the inode is
pulled off disk, rather than hitting the extended attributes
frequently during operations later, improving performance. This
also corrects sematics for shared vnode locks, which were not
previously present in the system. This chances the cache
coherrency properties WRT out-of-band access to label data, but in
an acceptable form. With UFS1, there is a small race condition
during automatic extended attribute start -- this is not present
with UFS2, and occurs because EAs aren't available at vnode
inception. We'll introduce a work around for this shortly.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
to parse their own label elements (some cleanup to occur here in the
future to use the newly added kernel strsep()). Policies now
entirely encapsulate their notion of label in the policy module.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Various cleanups, no functional changes:
- Fix a type in an entry point stub, socket checks accept
sockets, not vnodes.
- Trailing whitespace
- Entry point sort order
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
seperate entry points for each occasion:
mac_check_vnode_mmap() Check at initial mapping
mac_check_vnode_mprotect() Check at mapping protection change
mac_check_vnode_mmap_downgrade() Determine if a mapping downgrade
should take place following
subject relabel.
Implement mmap() and mprotect() entry points for labeled vnode
policies. These entry points are currently not hooked up to the
VM system in the base tree. These changes improve the consistency
of the access control interface and offer more flexibility regarding
limiting access to vnode mmaping.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
flags so that we can call malloc with M_NOWAIT if necessary, avoiding
potential sleeps while holding mutexes in the TCP syncache code.
Similar to the existing support for mbuf label allocation: if we can't
allocate all the necessary label store in each policy, we back out
the label allocation and fail the socket creation. Sync from MAC tree.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
- Change mpo_init_foo(obj, label) and mpo_destroy_foo(obj, label) policy
entry points to mpo_init_foo_label(label) and
mpo_destroy_foo_label(label). This will permit the use of the same
entry points for holding temporary type-specific label during
internalization and externalization, as well as for caching purposes.
- Because of this, break out mpo_{init,destroy}_socket() and
mpo_{init,destroy}_mount() into seperate entry points for socket
main/peer labels and mount main/fs labels.
- Since the prototype for label initialization is the same across almost
all entry points, implement these entry points using common
implementations for Biba, MLS, and Test, reducing the number of
almost identical looking functions.
This simplifies policy implementation, as well as preparing us for the
merge of the new flexible userland API for managing labels on objects.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
