connections to Bluetooth HID device. As soon as Bluetooth HID device
is powered off (or goes out of RF range) the stack will terminate both
connections. File descriptors for both connections will become active
on next select(2) call. Because bthidd(8) processes file descriptors
in order, it will detect descriptor for one of the closed connections
first and kill the session. However, there is still a second (active)
descriptor that used to point to the same session. bthidd(8) used to
assert() if it cant find session by file descriptor, which was wrong.
While I'm here fix a couple of typos in parser.y
Reported by: Eric Anderson anderson AT centtech DOT com
MFC after: 3 days
the same time.
Fix if_ndis_pccard.c so that it sets sc->ndis_dobj and sc->ndis_regvals.
Correct IMPORT_SFUNC() macros for the READ_PORT_BUFFER_xxx() routines,
which take 3 arguments, not 2.
This fixes it so that the Windows driver for my Cisco Aironet 340 PCMCIA
card works again. (Yes, I know the an(4) driver supports this card natively,
but it's the only PCMCIA device I have with a Windows XP driver.)
Have pmcstat(8) and pmccontrol(8) use these APIs.
Return PMC class-related constants (PMC widths and capabilities)
with the OP GETCPUINFO call leaving OP PMCINFO to return only the
dynamic information associated with a PMC (i.e., whether enabled,
owner pid, reload count etc.).
Allow pmc_read() (i.e., OPS PMCRW) on active self-attached PMCs to
get upto-date values from hardware since we can guarantee that the
hardware is running the correct PMC at the time of the call.
Bug fixes:
- (x86 class processors) Fix a bug that prevented an RDPMC
instruction from being recognized as permitted till after the
attached process had context switched out and back in again after
a pmc_start() call.
Tighten the rules for using RDPMC class instructions: a GETMSR
OP is now allowed only after an OP ATTACH has been done by the
PMC's owner to itself. OP GETMSR is not allowed for PMCs that
track descendants, for PMCs attached to processes other than
their owner processes.
- (P4/HTT processors only) Fix a bug that caused the MI and MD
layers to get out of sync. Add a new MD operation 'get_config()'
as part of this fix.
- Allow multiple system-mode PMCs at the same row-index but on
different CPUs to be allocated.
- Reject allocation of an administratively disabled PMC.
Misc. code cleanups and refactoring. Improve a few comments.
the NTP server list.
The servers are by Internet Multifeed Co., and connected to their
IX service JPNAP. It would be a good NTP server for machines in Japan.
See also http://www.jst.mfeed.ad.jp/ for more details (Japanese only).
Reviewed by: nork
When adding users from a preformatted file, do not exit
silently when empty lines or lines starting with a '#'
are encountered - ignore them instead.
- Fix a spelling error in a comment.
PR: bin/80058
here on in, if_ndis.ko will be pre-built as a module, and can be built
into a static kernel (though it's not part of GENERIC). Drivers are
created using the new ndisgen(8) script, which uses ndiscvt(8) under
the covers, along with a few other tools. The result is a driver module
that can be kldloaded into the kernel.
A driver with foo.inf and foo.sys files will be converted into
foo_sys.ko (and foo_sys.o, for those who want/need to make static
kernels). This module contains all of the necessary info from the
.INF file and the driver binary image, converted into an ELF module.
You can kldload this module (or add it to /boot/loader.conf) to have
it loaded automatically. Any required firmware files can be bundled
into the module as well (or converted/loaded separately).
Also, add a workaround for a problem in NdisMSleep(). During system
bootstrap (cold == 1), msleep() always returns 0 without actually
sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for
the NIC's firmware to come to life, and fails to load if NdisMSleep()
doesn't actually delay. As a workaround, if msleep() (and hence
ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead).
This is not really the right thing to do, but we can't really do much
else. At the very least, this makes the Intel driver happy.
There are probably other drivers that fail in this way during bootstrap.
Unfortunately, the only workaround for those is to avoid pre-loading
them and kldload them once the system is running instead.
attempt to clear its pending jobs list, as this could trigger another
signal, and cause an infinite recursion. What yppush_exit() tests
in order to determine whether to flush pending jobs is the
yppush_joblist chained list, so this is what needs to be cleared
in that case (not the yppush_jobs counter).
Reviewed by: audit@ (no objection)
MFC after: 2 weeks
allows us to specify the machine_arch as well as machine. If
specified then a second link will be made, similar to machine, from
$MACHINE_ARCH to $S/$MACHINE_ARCH/include.
This is for ports where MACHINE != MACHINE_ARCH (pc98 today, others in
the future?).
Reviewed by: arch@, nyan@
sha512, I did not do that since it is not entirely clear where "the one
true place" to hold their implementations is going to be. Sha256 is
different since mtree already links against libmd.
Make recommended procedure for integrity checking in the manpage
consistent.
Fix a bug with -f spec1 -f spec2 comparison, which prevented
test/tes03.sh from running successfully.
Reviewed by: phk, cperciva
fields that got added to it recently-ish. While here document
what each of the fields is based on discussion with portmgr@.
Patch from: murray (slightly adapted)
MFC after: 1 day
format, with humanize_number(3).
- Move the common parts of the code that prints the sizes for a single
swap device and the total to a single function to avoid repeating
the humanize_number() stuff all over the place.
- Change the type of CONVERT() from intmax_t to int64_t, since this
makes calling humanize_number() easier but cast the values to
intmax_t before printing them, to make use of the %jd format that
printf() supports.
- Document the new -h flag in the manpage and bump its date.
Approved by: pjd
Useful tips: brooks
MFC after: 2 weeks
Currently implemented are most things related to states and interfaces, todo
are address tables and altq. I've tried to keep this roughly in sync with a
project implementing this for net-snmpd.
Reviewed by: harti, dhartmei
MFC after: 1 month
This allows us to:
- perform scatter gather operations without using temporary files,
- create non-linear pipelines, and
- implement file views using symbolic links.
File view idea by: Vassilios Karakoidas
Portalfs pointer by: John Ioannidis
MFC after: 1 month
cojunction with -C and is used by /etc/rc.d/newsyslog.
I forgot that this was in my perforce tree and not my running system and
thus committed a non-working newsyslog script.
Reported by: des
Pointy hat: brooks
with EBUSY and a cdrom is not mounted at /cdrom, sysinstall fails to
treat it as an error and thinks that the disk mounted ok. However, it
doesn't find a cdrom.inf file so it complains. Later when it tries to
unmount the disk due to a mediaClose() umount(2) returns an error, and it
never clears its internal mounted flag. The fix here is to properly
handle EBUSY as an error if there isn't a CD already mounted at /cdrom.
- Add a new CDROMInitQuiet variable that can be used to shut up the dialog
box about the mount(2) system call failing when trying to mount a CD-ROM.
This is used by the feature described below.
- When using a fixit CD, first try to see if we can mount the disc in the
drive now and use it as a fixit CD. If not, then prompt the user to
insert the disc and try again. If we do succeed on the first "silent"
probe then we don't ask the user to eject the disk after leaving fixit
mode.
- Add a simple file existence test to make sure that the disc that we mount
really is a livefs disc.
- Explicitly switch back to ttyv0 when using the standard console after
the fixit shell dies. Previously this behavior worked accidentally
because all the fixit modes popped up a dialog box which contained a
hidden switch to ttyv0.
MFC after: 1 day
While version 4 entries are architecture-independent, we
also store old (version 3) entries in native byte order.
Also, the hash itself is created in a native byte order.
With this change, pwd_mkdb(8) can be used to cross-build
*pwd.db files for another architecture.
Tested on: i386, amd64, alpha, sparc64
