Commit Graph

16 Commits

Author SHA1 Message Date
Hajimu UMEMOTO
f073c60f73 pass pcb rather than so. it is expected that per socket policy
works again.
2004-02-03 18:20:55 +00:00
Andre Oppermann
97d8d152c2 Introduce tcp_hostcache and remove the tcp specific metrics from
the routing table.  Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.

It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination.  Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.

tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.

It removes significant locking requirements from the tcp stack with
regard to the routing table.

Reviewed by:	sam (mentor), bms
Reviewed by:	-net, -current, core@kame.net (IPv6 parts)
Approved by:	re (scottl)
2003-11-20 20:07:39 +00:00
Hajimu UMEMOTO
0f9ade718d - cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all.  secpolicy no longer contain
  spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy.  assign ID field to
  all SPD entries.  make it possible for racoon to grab SPD entry on
  pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header.  a mode is always needed
  to compare them.
- fixed that the incorrect time was set to
  sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
  because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
  alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
  XXX in theory refcnt should do the right thing, however, we have
  "spdflush" which would touch all SPs.  another solution would be to
  de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion.  ipsec_*_policy ->
  ipsec_*_pcbpolicy.
- avoid variable name confusion.
  (struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
  secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
  can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
  "src" of the spidx specifies ICMP type, and the port field in "dst"
  of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
  kernel forwards the packets.

Tested by:	nork
Obtained from:	KAME
2003-11-04 16:02:05 +00:00
Hajimu UMEMOTO
f95d46333d Switch Advanced Sockets API for IPv6 from RFC2292 to RFC3542
(aka RFC2292bis).  Though I believe this commit doesn't break
backward compatibility againt existing binaries, it breaks
backward compatibility of API.
Now, the applications which use Advanced Sockets API such as
telnet, ping6, mld6query and traceroute6 use RFC3542 API.

Obtained from:	KAME
2003-10-24 18:26:30 +00:00
Hajimu UMEMOTO
40e39bbb67 return(code) -> return (code)
(reduce diffs against KAME)
2003-10-06 14:02:09 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
5d84645305 Replace aux mbufs with packet tags:
o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
  ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
  use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
  inpcb parameter to ip_output and ip6_output to allow the IPsec code to
  locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version

Reviewed by:	julian, luigi (silent), -arch, -net, darren
Approved by:	julian, silence from everyone else
Obtained from:	openbsd (mostly)
MFC after:	1 month
2002-10-16 01:54:46 +00:00
SUZUKI Shinsuke
88ff5695c1 just merged cosmetic changes from KAME to ease sync between KAME and FreeBSD.
(based on freebsd4-snap-20020128)

Reviewed by:	ume
MFC after:	1 week
2002-04-19 04:46:24 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Brooks Davis
9494d5968f Make faith loadable, unloadable, and clonable. 2001-09-25 18:40:52 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Jonathan Lemon
14b62f116d Add missing "opt_inet6.h" header. 2001-08-31 13:49:03 +00:00
Hajimu UMEMOTO
3384154590 Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
  - The definitions of SADB_* in sys/net/pfkeyv2.h are still different
    from RFC2407/IANA assignment because of binary compatibility
    issue.  It should be fixed under 5-CURRENT.
  - ip6po_m member of struct ip6_pktopts is no longer used.  But, it
    is still there because of binary compatibility issue.  It should
    be removed under 5-CURRENT.

Reviewed by:	itojun
Obtained from:	KAME
MFC after:	3 weeks
2001-06-11 12:39:29 +00:00
Poul-Henning Kamp
cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
Jun-ichiro itojun Hagino
686cdd19b1 sync with kame tree as of july00. tons of bug fixes/improvements.
API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
  (also syntax change)
2000-07-04 16:35:15 +00:00