is reserved by the loader, and thus any tunable name with that suffix will
be silently discarded.
Document this in the header and man page so that other developers do not
develop so many bumps on the head after banging it against the wall.
Detective work by: Mark Santcroos, grehan
the vnode around calls to vinvalbuf()). Apparently no one has tested
ext2fs with DEBUG_VOP_LOCKS. Vnode locking for vinvalbuf() might not
be required in non-soft-updates cases, but it is now asserted.
MFffs (uncommitted related and nearby cleanups: don't unlock the vnode
after vinvalbuf() only to have to relock it almost immediately; don't
refer to devices classified by vn_isdisk() as block devices).
them mostly with packet tags (one case is handled by using an mbuf flag
since the linkage between "caller" and "callee" is direct and there's no
need to incur the overhead of a packet tag).
This is (mostly) work from: sam
Silence from: -arch
Approved by: bms(mentor), sam, rwatson
ISA. npx has few isa dependencies, but it does unconditional outb()'s to
the isa bus in the !SMP case, and it attaches to isa if "device isa" is
configured in order to support PNP-ISA. The ifdef for the latter was
misplaced.
PR: 62595
dishonored in rev.1.1 by commenting out the code that honored it. This
gave the worst disadvantages of async mounts in an uncontrollable way.
Honoring the flag costs about 50% in real time in worst cases on a new
but not very fast ATA drive with write caching (probably more on drives
without write caching). The old misbehavior can be recovered using
async mounts after implementing them in mount_ext2fs(8) (just put the
MNT_ASYNC flag in mount_ext2fs's table of supported options like it
is in mount's table).
- rejects IPv6 packet toward IPv4-mapped address if its source address
is not an IPv4-mapped IPv6 address, since the converted IPv4 packets
would have an unexpected IPv4 source address.
- when V6ONLY socket option is set, discard packets destined to a
v4/ipv4 mapped ipv6 address.
- have PULLDOWN_TEST codepath.
- get rid of in6_mcmatch().
Obtained from: KAME
to one, DEBUG_FLAGS, which is also compatible with <bsd.prog.mk>.
Previously one had to set both DEBUG and DEBUG_FLAGS to build the
.ko.debug with debugging symbols which was boring when doing this
manually.
versions of the modules, and unconditionally putting -g in CFLAGS
has negative impact on the size of the resulting .ko object, even
now that debugging symbols are always stripped.
shown that it is not useful.
Rename the relative count g_access_rel() function to g_access(), only
the name has changed.
Change all g_access_rel() calls in our CVS tree to call g_access() instead.
Add an #ifndef BURN_BRIDGES #define of g_access_rel() for source
code compatibility.
operators) in and near revs.1.169-1.170 (open mode bandaid). This
(or better a proper fix) should have been done before cloning the
bandaid to many other file systems.
set to SIGCHLD. This avoids the creation of orphaned Linux-threaded
zombies that init is unable to reap. This can occur when the parent
process sets its SIGCHLD to SIG_IGN. Fix a similar situation in the
PT_DETACH code.
Tested by: "Steven Hartland" <killing AT multiplay.co.uk>
- rev.1.42 of ffs_readwrite.c added a special case in ffs_read() for reads
that are initially at EOF, and rev.1.62 of ufs_readwrite.c fixed
timestamp bugs in it. Removal of most of vfs_ioopt made it just and
optimization, and removal of the vm object reference calls made it less
than an optimization. It was cloned in rev.1.94 of ufs_readwrite.c as
part of cloning ffs_extwrite() although it was always less than an
optimization in ffs_extwrite().
- some comments, compound statements and vertical whitespace were vestiges
of dead code.
- culled long-dead #define's
- segment register defs moved to sr.h
- NPMAPS moved to pmap.h
- KERNBASE moved to vmparam.h
- removed include of <machine/cpu.h> and fixed src files that
relied on this.
Modifying segment register code no longer causes gcc rebuilds :-)
This is the first of two commits; bringing in the kernel support first.
This can be enabled by compiling a kernel with options TCP_SIGNATURE
and FAST_IPSEC.
For the uninitiated, this is a TCP option which provides for a means of
authenticating TCP sessions which came into being before IPSEC. It is
still relevant today, however, as it is used by many commercial router
vendors, particularly with BGP, and as such has become a requirement for
interconnect at many major Internet points of presence.
Several parts of the TCP and IP headers, including the segment payload,
are digested with MD5, including a shared secret. The PF_KEY interface
is used to manage the secrets using security associations in the SADB.
There is a limitation here in that as there is no way to map a TCP flow
per-port back to an SPI without polluting tcpcb or using the SPD; the
code to do the latter is unstable at this time. Therefore this code only
supports per-host keying granularity.
Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6),
TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective
users of this feature, this will not pose any problem.
This implementation is output-only; that is, the option is honoured when
responding to a host initiating a TCP session, but no effort is made
[yet] to authenticate inbound traffic. This is, however, sufficient to
interwork with Cisco equipment.
Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with
local patches. Patches for tcpdump to validate TCP-MD5 sessions are also
available from me upon request.
Sponsored by: sentex.net
systems define power/sleep buttons in both places but only deliver
notifies to the ones defined in the AML.
Also, reduce length of various function handler names.
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
pci-hi/med/lo + node 'interrupts' property. This worked by
accident until recent notebooks required correct operation.
Tested by: Suleiman Souhlal <refugee@segfaulted.com>
routines to do anything except return error if the miniport adapter context
is not set (meaning we either having init'ed the driver yet, or the
initialization failed).
Also, be sure to NULL out the adapter context along with the
miniport characteristics pointers if calling the MiniportInitialize()
method fails.
the added comment for low-level details.) The effect of this race
condition is a panic "vm_page_cache: caching a dirty page, ..."
Reviewed by: tegge
MFC after: 7 days
created with the same name, and vice versa:
- Immediately recycle vnodes of files & directories that have been deleted
or renamed.
- When looking an entry in the VFS name cache or smbfs's private
cache, make sure the vnode type is consistent with the type of file
the server thinks it is, and re-create the vnode if it isn't.
The alternative to this is to recycle vnodes unconditionally when their
use count drops to 0, but this would make all the caching we do
mostly useless.
PR: 62342
MFC after: 2 weeks
- Factor out common settings and put them in an upper level Makefile.inc.
- Properly use PROG for real programs, not their products.
- Further reduce diffs to i386 versions.
Tested on: sparc64 (panther)
- Now that bsd.prog.mk deals with programs linked with -nostdlib
better, and has a notion of an "internal" program, use PROG
where possible. This has a good impact on the contents of
.depend files and causes programs to be linked with cc(1).
XXX: boot2 couldn't be converted as it's actually two programs.
Tested on: i386, amd64
the "disappearing subdisks" problem when new subdisks can't be created
due to some errors.
This is in fact an ugly hack, but a more elegant solution would probably
require a redesign of vinum in several places.
Approved by: joerg (mentor)
mindful of blocking on disk I/O and instead return EBUSY when such
blocking would occur.
Results from the DeBox project indicate that blocking on disk I/O
can slow the performance of a kqueue/poll based webserver. Using
a flag such as SF_NODISKIO and throwing connections that would block
to helper processes/threads helped increase performance.
Currently, only the Flash webserver uses this flag, although it could
probably be applied to thttpd with relative ease.
Idea by: Yaoping Ruan & Vivek Pai
nodes, or if they did, they're now locked away on the Kurt Gdel
memorial home for the numerically confused:
Don't cast a kernel pointer (from makedev(9)) to an integer (maj+minor combo).
on the card, unmap it first. This allows it to be picked up properly when
the queue gets kicked again. This was the root problem for the lost command
(i.e. stuck in getblk/vinvalb) problem. While here, panic if commands don't
map correctly instead of just silently ignoring the problem and dropping
command. Also slow down the dynamic allocation of new commands.
It should be safe to go back into the aac waters. Thanks to everyone who
suffered through this and provided good feedback.
802.11b chipset work. This chip is present on the SMC2602W version 3
NIC, which is what was used for testing. This driver creates kernel
threads (12 of them!) for various purposes, and required the following
routines:
PsCreateSystemThread()
PsTerminateSystemThread()
KeInitializeEvent()
KeSetEvent()
KeResetEvent()
KeInitializeMutex()
KeReleaseMutex()
KeWaitForSingleObject()
KeWaitForMultipleObjects()
IoGetDeviceProperty()
and several more. Also, this driver abuses the fact that NDIS events
and timers are actually Windows events and timers, and uses NDIS events
with KeWaitForSingleObject(). The NDIS event routines have been rewritten
to interface with the ntoskrnl module. Many routines with incorrect
prototypes have been cleaned up.
Also, this driver puts jobs on the NDIS taskqueue (via NdisScheduleWorkItem())
which block on events, and this interferes with the operation of
NdisMAllocateSharedMemoryAsync(), which was also being put on the
NDIS taskqueue. To avoid the deadlock, NdisMAllocateSharedMemoryAsync()
is now performed in the NDIS SWI thread instead.
There's still room for some cleanups here, and I really should implement
KeInitializeTimer() and friends.
seems to work well in RELENG_4. However, 5.X locking foo means that I'll
have to do some quick redesign.
Add ioctl handlers for ISP_GETROLE and ISP_SETROLE ioctls.
handling of resources shortages. The driver is now so fast that it can
completely fill all 512 slots on the card, but for some reason only 511
slots are being allocated. Anything that tries to go into the 512th
slot gets silently lost. Both bugs need to be fixed at a later date,
but this should fix the reports of hangs in getblk and vinvalb.
edge cases in the loop.
- Try to grab a command before dequeueing the bio from the bioq. The old
behaviour of requeuing deferred bios to the end of the bioq is arguably
wrong. This should be fixed in the future to check the bioq head without
automatically dequeueing the bio.
- do not use PROG for what's not a real C program,
- use sys.mk transformation rules where possible,
- only create the "machine" symlink on AMD64,
- removed MAINTAINER lines in individual makefiles,
- added the LIBSTAND defitinion to <bsd.libnames.mk>,
- somewhat better contents in .depend files.
Tested on: i386, amd64
Prodded by: bde
to catch are already nicely caught by trapping the null pointer derefs.
Remove no-longer-used noswitch/nothrow strings. They were referenced
by the stub cpu_switch() etc functions before they were implemented.
Try something a little different for the lock prefixes.
Prompted by: bde (the first two items anyway)
RLIM_INFINITY case for ogetrlimit().
- Use %jd and intmax_t to output negative time in usec in calcru().
- Rework getrusage() to make a copy of the rusage struct into a local
variable while holding Giant and then do the copyout from the local
variable to avoid having to have the original process rusage struct
locked while doing the copyout (which would not be safe). This also
includes a few style fixes from Bruce to getrusage().
Submitted by: bde (1, parts of 3)
Suggested by: bde (2)