Commit Graph

13 Commits

Author SHA1 Message Date
David E. O'Brien
c68159a6d8 Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
Peter Wemm
64db83a8ab Use .include <bsd.kmod.mk> to get to ../../*/conf/kmod.mk instead of
encoding the relative path.
2000-05-27 01:14:33 +00:00
Peter Wemm
56ca39961b Pull in sys/conf/kmod.mk, rather than /usr/share/mk/bsd.kmod.mk.
This means that the kernel can be totally self contained now and is not
dependent on the last buildworld to update /usr/share/mk.  This might
also make it easier to build 5.x kernels on 4.0 boxes etc, assuming
gensetdefs and config(8) are updated.
2000-05-04 12:08:52 +00:00
Peter Wemm
23f282aa31 Zap KMODDEPS line 2000-05-01 18:58:48 +00:00
Bruce Evans
9e4be63dd6 Add ${DEBUG_FLAGS} to CFLAGS in bsd.kmod.mk, not in scattered module
makefiles.  Bad examples in fxp/Makefile keep getting copied to new
makefiles.
2000-01-28 11:26:46 +00:00
Bruce Evans
6f940b3847 Removed special rules for building and cleaning device interface files
and empty options files.  The rules are now generated automatically in
bsd.kmod.mk.  Cleaned up related things ($S and ${CLEANFILES}).
1999-11-28 18:53:47 +00:00
Peter Wemm
f274c85d8b Zap some unused echo "#define NFOO 1" > foo.h style defunct stuff. 1999-09-27 01:04:44 +00:00
Peter Wemm
18b039eb04 Don't generate 'bpf.h' since it's not used. 1999-09-27 00:34:02 +00:00
David E. O'Brien
40ec3caac8 Change the name of the installed KLM to contain a leading "if_".
Except for miibus which is now installed as miibus.ko.

Discussed by:	msmith, peter, and wpaul
1999-09-20 06:11:48 +00:00
Bill Paul
4ae17070a2 Convert the Adaptec and Winbond drivers to miibus. 1999-08-30 23:08:32 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
08339b4fa4 Convert the VIA Rhine driver to newbus and set it up to be compiled as
a module. Also modified the code to work on FreeBSD/alpha and added
device vr0 to the alpha GENERIC config.

While I was in the neighborhood, I noticed that I was still using
#define NFPX 1 in all of the Makefiles that I'd copied from the fxp
module. I don't really use #define Nfoo X so it didn't matter, but
I decided to customize this correctly anyway.
1999-08-10 17:15:20 +00:00
Bill Paul
691c152864 This commit adds device driver support for Adaptec Duralink PCI fast
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.

The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.

This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00