Commit Graph

27 Commits

Author SHA1 Message Date
Hans Petter Selasky
563ab08139 Improve the XHCI command timeout recovery handling code.
MFC after:	1 week
2013-12-06 08:42:41 +00:00
Hans Petter Selasky
6950c75f40 - Move scratch data from the USB bus structure to the USB device structure
so that simultaneous access cannot happen. Protect scratch area using
the enumeration lock. Also reduce stack usage in usbd_transfer_setup()
by moving some big stack members to the scratch area. This saves around
200 bytes of stack.
- Fix a whitespace.

MFC after:	1 week
2013-02-10 10:56:13 +00:00
Hans Petter Selasky
a5cf1aaaff Add support for the so-called streams feature of BULK endpoints
in SUPER-speed mode, USB 3.0.

This feature has not been tested yet, due to lack of hardware.

This feature is useful when implementing protocols like UASP,
USB attached SCSI which promises higher USB mass storage throughput.

This patch also implements support for hardware processing of endpoints
for increased performance. The switching to hardware processing
of an endpoint is done via a callback to the USB controller driver. The
stream feature is implemented like a variant of a hardware USB protocol.

USB controller drivers implementing device mode needs to be updated to
implement the new "xfer_stall" USB controller method and remove the
"xfer" argument from the "set_stall" method.

The API's toward existing USB drivers are preserved. To setup a USB transfer
in stream mode, set the "stream_id" field of the USB config structure to
the desired value.

The maximum number of BULK streams is currently hardcoded and limited to 8
via a define in usb_freebsd.h.

All USB drivers should be re-compiled after this change.

LibUSB will be updated next week to support streams mode. A new IOCTL to
setup BULK streams as already been implemented. The ugen device nodes
currently only supports stream ID zero.

The FreeBSD version has been bumped.

MFC after:	2 weeks
2012-08-12 17:53:06 +00:00
Hans Petter Selasky
0a4cc48fe5 Add support for Multi-TT mode of modern USB HUBs.
This will give you more bandwidth for isochronous
FULL speed applications connected through a
High Speed HUB.

This patch has been tested with XHCI and EHCI.

MFC after:	1 week
2012-04-29 17:12:33 +00:00
Hans Petter Selasky
2e14174893 Implement better support for USB controller suspend and resume.
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00
Weongyo Jeong
b443638277 Removes a unused function `usb_bus_find'. 2010-11-25 22:56:26 +00:00
Weongyo Jeong
18ec652552 Adds a USB packet filter feature to the stack that it could capture
packets which go through each USB host controllers.  Its implementations
are almost based on BPF code and very similar with it except it's
little bit customized for USB packet only.  The userland program
usbdump(8) would be committed soon.

Discussed with:	hps, thompsa, yongari
2010-11-22 01:11:28 +00:00
Hans Petter Selasky
963169b4af This commit adds full support for USB 3.0 devices in host and device
mode in the USB core.  The patch mostly consists of updating the USB
HUB code to support USB 3.0 HUBs. This patch also add some more USB
controller methods to support more active-alike USB controllers like
the XHCI which needs to be informed about various device state events.

USB 3.0 HUBs are not tested yet, due to lack of hardware, but are
believed to work.

After this update the initial device descriptor is only read twice
when we know that the bMaxPacketSize is too small for a single packet
transfer of this descriptor.

Approved by:    thompsa (mentor)
2010-10-04 23:18:05 +00:00
Andrew Thompson
d2d71ce7a8 Add support for power mode filtering as some USB hardware does not support
power saving.

Submitted by:	Hans Petter Selasky
2010-09-02 04:05:00 +00:00
Andrew Thompson
527aa7b226 Change argument for usbd_get_dma_delay() from USB bus to USB device, some
embedded hardware needs to know exactly which device is in question before it
exactly can decide the required delay.

Submitted by:	Hans Petter Selasky
2010-09-02 04:01:18 +00:00
Alfred Perlstein
dddb25f98a USB CORE:
- Add minimum polling support to drive UMASS
  and UKBD in case of panic.
- Add extra check to ukbd probe to fix problem about
  mouse devices attaching like keyboards.
- P4 ID: 166148

Submitted by:	hps
Approved by:	re
2009-07-30 00:14:34 +00:00
Andrew Thompson
29bd7d7e9a Sync to p4
- Add support for devices that handle set and clear stall in hardware.
 - Add missing get timestamp function
 - Add more xfer flags

Submitted by:	Hans Petter Selasky
Approved by:	re (kib)
2009-06-27 21:23:30 +00:00
Andrew Thompson
ed6d949afd - Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just   usb.h and usbdi.h
2009-06-23 02:19:59 +00:00
Andrew Thompson
759736470c Fix _USB2_* refernces in the header protection defines. 2009-06-15 01:09:19 +00:00
Andrew Thompson
a593f6b8de s/usb2_/usb_|usbd_/ on all function names for the USB stack. 2009-06-15 01:02:43 +00:00
Andrew Thompson
ae60fdfba2 Rename usb pipes to endpoints as it better represents what they are, and struct
usb_pipe may be used for a different purpose later on.
2009-06-07 19:41:11 +00:00
Andrew Thompson
f9cb546c23 Revert the size_t part of the last commit for the moment, this blows up the
USB_ADD_BYTES macro.
2009-05-30 00:22:57 +00:00
Andrew Thompson
e0a69b51ac s/usb2_/usb_/ on all typedefs for the USB stack. 2009-05-29 18:46:57 +00:00
Andrew Thompson
760bc48e7e s/usb2_/usb_/ on all C structs for the USB stack. 2009-05-28 17:36:36 +00:00
Andrew Thompson
8d2dd5dd85 Use enums for speed and rev data types. 2009-05-21 01:05:21 +00:00
Andrew Thompson
459d369ee2 MFp4 //depot/projects/usb@160930
Change the roothub exec functions to take the usb request and data pointers
directly rather than placing them on the parent bus struct.

Submitted by:	Hans Petter Selasky
2009-04-22 17:08:16 +00:00
Andrew Thompson
fde875265f Provide a better commit log for r190735, forced by making a whitespace change.
Refactor how we interface with the root HUB. This is achieved by making a
direct call from usb2_do_request to the host controller for root hub requests,
this call will perform the controller specific register read/writes and return
the error code.

This cuts out a lot of code in the host controller files and saves one thread
per USB bus.

Submitted by:	Hans Petter Selasky
2009-04-06 00:22:49 +00:00
Andrew Thompson
4565300d56 MFp4 //depot/projects/usb@159946
Some cancelable flags are always true.  Substitute these away. These cancelable
flags were mostly useful with the root HUB which is now handled differently.

Submitted by:	Hans Petter Selasky
2009-04-05 18:21:21 +00:00
Andrew Thompson
3930731567 MFp4 //depot/projects/usb@159922
Refactor how we interface with the root HUB. This cuts around 1200 lines of
code totally and saves one thread per USB bus.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:49 +00:00
Andrew Thompson
578d0eff90 MFp4 //depot/projects/usb @159431,159437,159438
- start using the new USB typedefs in the USB core
- Remove usage of USB_ADD_BYTES()

Submitted by:	Hans Petter Selasky
2009-03-20 21:50:54 +00:00
Andrew Thompson
4a35cda731 MFp4 //depot/projects/usb@157853
Clean up old way of polling the USB hardware.  The existing polling support was
a bit hackish.

Submitted by:	Hans Petter Selasky
2009-02-24 03:39:13 +00:00
Andrew Thompson
02ac645488 Move the new USB stack into its new home. 2009-02-23 18:31:00 +00:00