Remove assumptions about the minimum MINALLOCSIZE, in order to allow
testing of smaller MINALLOCSIZE. A following patch will lower the
MINALLOCSIZE, but not so much that the present patch is required for
correctness at these sites.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
struct xucred. Do not bump XUCRED_VERSION as struct layout is not changed.
PR: 215202
Reviewed by: tijl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20415
node is set, allow setting security.bsd.unprivileged_proc_debug per-jail.
In part, this is needed to create jails in which the Address Sanitizer
(ASAN) fully works as ASAN utilizes libkvm to inspect the virtual address
space. Instead of having to allow unprivileged process debugging for the
entire system, allow setting it on a per-jail basis.
The sysctl node is still security.bsd.unprivileged_proc_debug and the
jail(8) param is allow.unprivileged_proc_debug. The sysctl code is now a
sysctl proc rather than a sysctl int. This allows us to determine setting
the flag for the corresponding jail (or prison0).
As part of the change, the dynamic allow.* API needed to be modified to
take into account pr_allow flags which may now be disabled in prison0.
This prevents conflicts with new pr_allow flags (like that of vmm(4)) that
are added (and removed) dynamically.
Also teach the jail creation KPI to allow differences for certain pr_allow
flags between the parent and child jail. This can happen when unprivileged
process debugging is disabled in the parent prison, but enabled in the
child.
Submitted by: Shawn Webb <lattera at gmail.com>
Obtained from: HardenedBSD (45b3625edba0f73b3e3890b1ec3d0d1e95fd47e1, deba0b5078cef0faae43cbdafed3035b16587afc, ab21eeb3b4c72f2500987c96ff603ccf3b6e7de8)
Relnotes: yes
Sponsored by: HardenedBSD and G2, Inc
Differential Revision: https://reviews.freebsd.org/D18319
Doing so removes the dependency on proctree lock from sysctl process list
export which further reduces contention during poudriere -j 128 runs.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17825
The lock is required to ensure that the switch to the new credentials
and the transfer of the process's accounting data from the old
credentials to the new ones is done atomically. Otherwise, some updates
may be applied to the new credentials and then additionally transferred
from the old credentials if the updates happen after proc_set_cred() and
before racct_proc_ucred_changed().
The problem is especially pronounced for RACCT_RSS because
- there is a strict accounting for this resource (it's reclaimable)
- it's updated asynchronously by the vm daemon
- it's updated by setting an absolute value instead of applying a delta
I had to remove a call to rctl_proc_ucred_changed() from
racct_proc_ucred_changed() and make all callers of latter call the
former as well. The reason is that rctl_proc_ucred_changed, as it is
implemented now, cannot be called while holding the proc lock, so the
lock is dropped after calling racct_proc_ucred_changed. Additionally,
I've added calls to crhold / crfree around the rctl call, because
without the proc lock there is no gurantee that the new credentials,
owned by the process, will stay stable. That does not eliminate a
possibility that the credentials passed to the rctl will get stale.
Ideally, rctl_proc_ucred_changed should be able to work under the proc
lock.
Many thanks to kib for pointing out the above problems.
PR: 222027
Discussed with: kib
No comment: trasz
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15048
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
(NB: This was likely a mismerge from XNU in audit support, where the
text argument to setlogin(2) is captured -- but as a text token,
whereas this change uses the dedicated login-name field in struct
audit_record.)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
- Move cr_canseeinpcb to sys/netinet/in_prot.c in order to separate the
INET and INET6-specific code from the rest of the prot code (It is only
used by the network stack, so it makes sense for it to live with the
other network stack code.)
- Move cr_canseeinpcb prototype from sys/systm.h to netinet/in_systm.h
- Rename cr_seeotheruids to cr_canseeotheruids and cr_seeothergids to
cr_canseeothergids, make them non-static, and add prototypes (so they
can be seen/called by in_prot.c functions.)
- Remove sw_csum variable from ip6_forward in ip6_forward.c, as it is an
unused variable.
Reviewed by: gnn, jtl
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2901
and replace crcopysafe by crcopy as crcopysafe is is not intended to be
safe in a threaded environment, it drops PROC_LOCK() in while() that
can lead to unexpected results, such as overwrite kernel memory.
In my POV crcopysafe() needs special attention. For now I do not see
any problems with this function, but who knows.
Submitted by: dchagin
Found by: trinity
Security: SA-16:04.linux
Their primary use was in thread_cow_update to free up old resources.
Freeing had to be done with proc lock held and _cow_ funcs already knew
how to free old structs.
Thread credentials are maintained as follows: each thread has a pointer to
creds and a reference on them. The pointer is compared with proc's creds on
userspace<->kernel boundary and updated if needed.
This patch introduces a counter which can be compared instead, so that more
structures can use this scheme without adding more comparisons on the boundary.
proc_set_cred_init can be used to set first credentials of a new
process.
Update proc_set_cred assertions so that it only expects already used
processes.
This fixes panics where p_ucred of a new process happens to be non-NULL.
Reviewed by: kib
The goal here is to provide one place altering process credentials.
This eases debugging and opens up posibilities to do additional work when such
an action is performed.
attachment to the process. Note that the command is not intended to
be a security measure, rather it is an obfuscation feature,
implemented for parity with other operating systems.
Discussed with: jilles, rwatson
Man page fixes by: rwatson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- 'groups' initialization to NULL is always ovewrwriten before use, so plug it
- get rid of 'goto out'
- kern_setgroups's callers already validate ngrp, so only assert the condition
- ngrp is an u_int, so 'ngrp < 1' is more readable as 'ngrp == 0'
No functional changes.
Traced processes always have the tracer set as the parent.
Utilize proc_realparent to obtain the right process when needed.
Reviewed by: kib
MFC after: 1 week
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
it possible for the kernel to track login class the process is assigned to,
which is required for RCTL. This change also make setusercontext(3) call
setloginclass(2) and makes it possible to retrieve current login class using
id(1).
Reviewed by: kib (as part of a larger patch)
PMC/SYSV/...).
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: arch@ (parts by rwatson, trasz, jhb)
X-MFC after: to be determined in last commit with code from this project
of allocating what ever the user asks for up to "ngroups_max + 1". On
systems with large values of kern.ngroups this will be more efficient.
The now redundant check that the array is large enough in
kern_getgroups() is deliberate to allow this change to be merged to
stable/8 without breaking potential third party consumers of the API.
Reported by: bde
MFC after: 28 days
kern.ngroups+1. kern.ngroups can range from NGROUPS_MAX=1023 to
INT_MAX-1. Given that the Windows group limit is 1024, this range
should be sufficient for most applications.
MFC after: 1 month
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
