Commit Graph

41 Commits

Author SHA1 Message Date
Peter Wemm
1faa5a84a8 Use DEVICE_MODULE() directly instead of DEV_DRIVER_MODULE. psm.c uses
make_dev() already.
1999-11-08 07:29:23 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Kazutaka YOKOTA
800da3b22a - Remove cdevsw entry points in individual keyboard drivers;
instead, use generic entry points for all drivers.
- Eliminate bogus makedev().
- Eliminate softc in the lower drivers, as it is no longer necessary.

Submitted (95%) by: phk
1999-08-22 09:52:33 +00:00
Kazutaka YOKOTA
7d27f93ac4 Improve the detection code for GlidePoint. This is still a kludge,
but better than before...

PR: kern/13215
1999-08-22 06:11:52 +00:00
Kazutaka YOKOTA
e6d37e188f Recognize Interlink VersaPad. `Tap' action will be recognized
as the button 4.

Submitted by: Masachika ISHIZUKA <ishizuka@ish.org>
1999-08-17 12:14:13 +00:00
Kazutaka YOKOTA
6c6028fffb Correctly save `flags' bits. 1999-08-15 06:06:14 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Kazutaka YOKOTA
29e59d7deb - Move the `return' statement the correct place so that the keyboard
won't be initialized if `atkbd?' is disabled.
1999-07-18 06:16:25 +00:00
Kazutaka YOKOTA
01533d852e Improve Logitech MouseMan+ protocol support. 1999-07-12 15:16:14 +00:00
Kazutaka YOKOTA
551e01b126 Implement a kludge for some wheeled mice for which infamous "psmintr:
out of sync..." messages is generated and the wheel movement is not
recognized.

The trick is found by Takashi Nishida.
1999-07-12 13:40:21 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Kazutaka YOKOTA
a6c5d058bc Allocate the port resource when attaching the keyboard controller,
rather than when the individual child device is attached.
1999-06-29 17:35:09 +00:00
Kazutaka YOKOTA
2b9e6c7549 Fix PS/2 MouseMan+ protocol. We have been looking at a wrong place
for the sign bit for roller movement!
1999-06-03 12:42:10 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Doug Rabson
f7f2df54bb No support for pnp yet. 1999-05-30 11:12:30 +00:00
Doug Rabson
6f50cfb43a Use the resource apis to manipulate resources. 1999-05-22 15:47:34 +00:00
Kazutaka YOKOTA
d3c87b8512 - Include isa/isareg.h rather than i386/isa/isa.h for i386.
- Remove unused (thus, commented out) section of code.
1999-05-20 09:49:33 +00:00
Kazutaka YOKOTA
aee1b285f1 Include sys/isa/isareg.h rather than i386/isa/isa.h for i386. 1999-05-20 09:48:13 +00:00
Kazutaka YOKOTA
ec6948ccea Slight reorganization of internal interface in the keyboard controller
driver.
1999-05-18 11:33:14 +00:00
Kazutaka YOKOTA
83fc7c6ced The previous commit was wrong! This is the correct one ;-< 1999-05-18 11:05:58 +00:00
Peter Wemm
e2eb6a14cd Remove hackish foot protection.. If you ask for an atkbd on an isa bus
rather than on the keyboard controller, you will get it.. (and shoot your
feet)
1999-05-09 20:45:53 +00:00
Poul-Henning Kamp
52400704e9 Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
Kazutaka YOKOTA
194da42d48 Don't confuse cursor keys with numpad keys when composing a char code.
PR: kern/10988
1999-05-09 05:00:19 +00:00
Kazutaka YOKOTA
57600c2385 Minor tweak after the introduction of new-bus to i386; properly
check "disabled" and "flags" probe hints.
1999-05-09 04:59:24 +00:00
Kazutaka YOKOTA
d1a67a9435 Revive APM hooking code for i386 arch now that the same source file is
used for both i386 and alpha (the code was in sys/i386/isa/psm.c, but
was disabled when ported to alpha.)
1999-05-09 04:58:35 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
6d9ecc2ba7 Print the child IRQ on it's identification line. 1999-05-08 20:25:38 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Peter Wemm
25f4337454 Merge revs 1.57 and 1.60 of i386/isa/psm.c 1999-04-18 15:12:11 +00:00
Peter Wemm
c2c75d780e As a temporary anti-foot-shooting measure, don't let the user attach
the atkbd device to isa, as was in the old (and 3.x) GENERIC config.
1999-04-16 23:39:15 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Kazutaka YOKOTA
e9deda23ae Keyboard driver update in preparation for the USB keyboard driver.
- Refined internal interface in keyboard drivers so that:
  1. the side effect of device probe is kept minimal,
  2. polling mode function is added,
  3. and new ioctl and configuration options are added (see below).

- Added new ioctl: KDSETREPEAT
  Set keyboard typematic rate.  There has existed an ioctl command,
  KDSETRAD, for the same purpose.  However, KDSETRAD is dependent on
  the AT keyboard.  KDSETREPEAT provides more generic interface.
  KDSETRAD will still be supported in the atkbd driver.

- Added new configuration options:
  ATKBD_DFLT_KEYMAP
  Specify a keymap to be used as the default, built-in keymap.
  (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP,
  SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap.
  These options are now gone for good.  The new option is more general.)

  KBD_DISABLE_KEYMAP_LOADING
  Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
Kazutaka YOKOTA
ffba82a9ae - Fixed the bug which always ignored Ctrl-Pause/Break on the AT 101
keyboard.
- Translate some keycode for the 84 keyboard so that the 84 keyboard
  and the 101 keyboard become more compatible in terms of keycodes.
- Updated the built-in keymaps so that it is in line with the recent
  changes in share/syscons/keymaps.
- Added some comment on the Pause/Break key on the 101 keyboard.
1999-01-28 10:55:55 +00:00
Doug Rabson
8a99777019 Update the alpha port to use the new syscons.
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> (partly)
1999-01-23 16:53:30 +00:00
Kazutaka YOKOTA
f359876ff1 syscons
- Bring down the splash screen when a vty is opened for the first
  time.
- Make sure the splash screen/screen saver is stopped before
  switching vtys.
- Read and save initial values in the BIOS data area early.
  VESA BIOS may change BIOS data values when switching modes.
- Fix missing '&' operator.
- Move ISA specific part of driver initialization to syscons_isa.c.

atkbd
- kbdtables.h is now in /sys/dev/kbd.

all
- Adjust for forthcoming alpha port.  Submitted by: dfr
1999-01-19 11:31:22 +00:00
Kazutaka YOKOTA
00f19754a4 Use the correct macro to test flags; we need KBD_IS_INITIALIZED here,
not KBD_IS_PROBED.
1999-01-13 11:19:19 +00:00
Kazutaka YOKOTA
617b908036 Add the new keyboard driver and video card driver. They will be
used by console drivers.

(They are not yet activated yet.  Wait for announcement later.)
1999-01-09 02:44:50 +00:00
Doug Rabson
08b6a4cbee * Add hooks to allow the X server to access I/O ports and memory.
* Update drivers to the latest version of the bus interface.

The ISA drivers' use of the new resource api is minimal.  Garrett has
some much cleaner drivers which should be more easily shared between
i386 and alpha.  This has only been tested on cia based machines.  It
should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
Doug Rabson
66d22cfe03 Port the ps/2 mouse driver to the alpha. 1998-11-08 18:43:03 +00:00