d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
56,179 Commits 72 Branches 135 Tags 3.2 GiB
aa0b4c590f
Commit Graph

694 Commits

Author SHA1 Message Date
Peter Wemm
93cd41f72d Zap silly #if NPCI > 0 and the hoops that we jump through for the module 
case.  Use an 'and' case in conf/files so that it only gets compiled if
pci is present.
 2001-01-29 11:38:39 +00:00
Yoshihiro Takahashi
ba4c5e6950 Added necessary include for pc98. 2001-01-25 09:56:04 +00:00
Yoshihiro Takahashi
5069714534 Added PC-98 apm support. 
Submitted by:	MURAMATSU Atsushi <amura@ma3.seikyou.ne.jp>
 2001-01-22 11:27:25 +00:00
Peter Wemm
ba014c35dc Argh! add card_if.h to the generated list. This fixes kernel builds for 
those who haven't added 'NO_MODULES=off' to /etc/make.conf.
 2001-01-17 22:36:49 +00:00
Mark Murray
c202cd74f8 Clean up Makefile, and remove the last vestiges of NOBLOCKRANDOM. 2001-01-15 19:35:00 +00:00
Brian Feldman
7dd1f91a70 Evidently, svr4 is broken at the moment. Disconnect the build to prevent 
Bad Things from unsuspecting module loaders.
 2001-01-09 04:56:53 +00:00
Garrett Wollman
0a2c3d48c6 select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
Garrett Wollman
7f8c734f00 Note new location of wi driver source code. 2001-01-09 04:29:29 +00:00
Warner Losh
bdbd54e46d Add aic to the list of drivers that might work with NEWCARD. I've added 
the same config lines that NetBSD has.  This builds with both NEWCARD
and GENERIC config files.
 2001-01-08 01:59:15 +00:00
Peter Wemm
e4b36f7dd8 It is unlikely that we'll be supporting old-style ZMAGIC linux a.out 
binaries on anything but i386.. (ia64, sparc64, etc)  Invert the .if
so that it is inclusive of i386 platforms rather than excluding just
the alpha.
 2001-01-07 03:10:15 +00:00
David E. O'Brien
c68159a6d8 Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
Jeroen Ruigrok van der Werven
cbfa684843 We don't use += for SRCS in Makefiles, we simply use the 
line continuation character and state the rest of the sourcefiles
on the next line.
 2001-01-06 09:44:30 +00:00
Jun Kuriyama
33dc87aa84 Fix typo. 
Pointed out by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
 2001-01-06 06:20:54 +00:00
Nicolas Souchu
c05aa33cb0 Add the VESA S3 linear framebuffer driver. It works on top of VESA by replacing 
the video switch by another. Exactly as VESA does on top of VGA.

It adds linear framebuffer to S3 VESA 1.2 cards.

Obtained from:	The original S3 ISA code comes from
                Peter Horton <pdh@colonel-panic.com>
 2001-01-05 16:53:10 +00:00
John Hay
121a47e264 Make sppp a kld. 2001-01-03 08:12:30 +00:00
Warner Losh
e2f9e1a37f add pcic_p to the list of things built 2001-01-02 21:40:41 +00:00
Poul-Henning Kamp
924836d50e Add a missing vnode_if.h. 
Submitted by:	Jim Bloom <bloom@acm.org>
 2001-01-01 11:28:32 +00:00
Paul Richards
2d1a798869 Change the module name from lnc to if_lnc so that ifconfig works. 2000-12-29 11:46:17 +00:00
Dag-Erling Smørgrav
dd488b6dd8 Retire kernfs (kernel part). 2000-12-28 12:17:35 +00:00
Cameron Grant
a906b37278 add sys/dev/sound/pcm/buffer.c, lefo out of last commit 2000-12-23 03:27:09 +00:00
David E. O'Brien
45c27b729e *sigh* The `pecoff' module was added to all arches w/out testing a compile 
on all arches.  This fixes the Alpha kernel build.
 2000-12-22 22:33:15 +00:00
Takanori Watanabe
d8c616aedc Add ACPI AC adaptor and ACPI Control Method Battery. 
And install notify handler for thermal zone .
 2000-12-22 14:41:55 +00:00
Takanori Watanabe
6ef9f30dfd Add pecoff directory. 
Submitted by:nyan
 2000-12-21 15:33:30 +00:00
Takanori Watanabe
bffb191efe Add PECOFF (WIN32 Execution file format) support. 
To use it, some dll is needed. And currently, the dll is only for NetBSD.
So one more kernel module is needed.
For more infomation,
http://chiharu.haun.org/peace/ .

Reviewed by:	bp
 2000-12-20 12:51:08 +00:00
Alexander Langer
a4563d080a Enable the sym module. 2000-12-19 12:54:17 +00:00
Alexander Langer
2422a9c63d Use the default value for MFILES 2000-12-19 12:27:53 +00:00
Brian Feldman
2ab4063613 Unbreak the modules after the last commit (newpcm kobjification). 2000-12-18 06:39:01 +00:00
Cameron Grant
0f55ac6c1a kobjify. 
this gives us several benefits, including:

* easier extensibility- new optional methods can be added to
  ac97/mixer/channel classes without having to fixup every driver.

* forward compatibility for drivers, provided no new mandatory methods are
  added.
 2000-12-18 01:36:41 +00:00
Yoshihiro Takahashi
f3474f630e PC-98 boxes use aic_cbus.c instead of aic_isa.c. 2000-12-16 04:00:40 +00:00
Paul Richards
5d2dea723c Enable building of lnc module. 2000-12-16 01:48:06 +00:00
Paul Richards
96a23f090a Add lnc module. 2000-12-16 01:47:37 +00:00
Bill Paul
b1df743d8a Whups: only build the if_el module on the x86 platform for now, until 
I can confirm it works on the alpha.
 2000-12-15 20:14:19 +00:00
Bill Paul
1b49710482 Newbus the if_el (3Com 3c501) driver. Use bus_space_X() functions. 
Add detach routine and turn driver into a module so it can be loaded
and unloaded. Also take a stab at implementing multicast packet
reception so that this NIC will work with IPv6. Promiscuous mode
doesn't seem to work, but I'm not sure why. It works well enough that
I can run dhclient on it and put it on the office network though.
Also ripped out spl stuff and replaced it with mutexes.
 2000-12-15 20:09:10 +00:00
Warner Losh
ff93e72c08 Fix this based on Mike's moved pci code. We needed to delete the pci_m 
from this module anyway, so I just did that.
 2000-12-14 00:06:10 +00:00
Dag-Erling Smørgrav
026527e5b8 Reconnect linprocfs. 2000-12-13 20:29:30 +00:00
Warner Losh
641d2fddd3 Add aic and ray modules. I've been building these for a while now on 
i386.
 2000-12-13 05:54:26 +00:00
Warner Losh
598364a003 Module for aic 
Submitted by:	Michael Reifenberger
 2000-12-13 05:50:02 +00:00
Dag-Erling Smørgrav
190a3b2513 The linprocfs sources have moved to sys/compat/linprocfs. 2000-12-12 22:00:05 +00:00
Dag-Erling Smørgrav
2b3d269b8b Temporarily disconnect linprocfs from the build, until I fix it so it builds 
with Kirk's big proc patch.
 2000-12-12 16:03:17 +00:00
Yoshihiro Takahashi
be98a6c10d Added '-DPC98' to CFLAGS if MACHINE == pc98. 2000-12-10 10:07:50 +00:00
Dag-Erling Smørgrav
eba4802243 Add four missing source files. 2000-12-09 13:17:35 +00:00
Mike Smith
bb0d0a8efc Next phase in the PCI subsystem cleanup. 
- Move PCI core code to dev/pci.
 - Split bridge code out into separate modules.
 - Remove the descriptive strings from the bridge drivers.  If you
   want to know what a device is, use pciconf.  Add support for
   broadly identifying devices based on class/subclass, and for
   parsing a preloaded device identification database so that if
   you want to waste the memory, you can identify *anything* we know
   about.
 - Remove machine-dependant code from the core PCI code.  APIC interrupt
   mapping is performed by shadowing the intline register in machine-
   dependant code.
 - Bring interrupt routing support to the Alpha
   (although many platforms don't yet support routing or mapping
   interrupts entirely correctly).  This resulted in spamming
   <sys/bus.h> into more places than it really should have gone.
 - Put sys/dev on the kernel/modules include path.  This avoids
   having to change *all* the pci*.h includes.
 2000-12-08 22:11:23 +00:00
Alexander Langer
8ffced21e8 Build the sym driver as a kernel module. 2000-12-07 21:46:04 +00:00
Warner Losh
98b2dbaaa2 Add support for compiling ray driver. 2000-12-07 03:16:21 +00:00
Takanori Watanabe
d55a2811f5 Update Makefile to follow acpica-1115 import. 2000-12-05 08:47:41 +00:00
Marcel Moolenaar
b4c6727a3a Don't auto-generate the syscalls. 2000-12-03 01:30:31 +00:00
Marcel Moolenaar
fa581ad823 Fix dependency for auto-generated files. This commit is 
for archiving purposes only; auto-generation is going to
be reverted.

requested by: obrien
submitted: gallatin
 2000-12-02 23:47:41 +00:00
Mark Murray
5f7f65f124 Default the /dev/random loadable module to blocking-on-bootup, 
but leave a commented-out macro to change this.
 2000-12-02 18:29:18 +00:00
Alfred Perlstein
07b219e204 Revert disconnect of sysvipc now that there's a makefile available 2000-12-01 21:13:06 +00:00
Alfred Perlstein
c6105ae6e5 Forgotten makefile. 2000-12-01 17:49:16 +00:00