which is also called from handle_hup(), uses stdio(3). Furthermore,
this means that calling exit(3) (via quit()) there is required to
flush the buffer write_file() was working on.
Submitted by: bde
signal. Fix it by adding an explicit call to summary() in terminate()
(it was previously called implicitly by exit() because summary() was
registered with atexit()). summary() is supposed to be signal-safe--
it handles SIGINFO almost exclusively--so this should be safe.
Submitted by: bde
the !(pflag && setfile()) case for regular files unless the copy is
owned by the same user and group. These bits have already been lost
(or never gained) in the correct way. The code didn't actually lose
the bits; it depended on them being lost already (apparently in all
cases) and attempted to gain them as necessary, but it often gained
them (and sometimes collateral bits) when wrong:
- pflag && setfile() == 0 case (i.e., for a successful cp -p):
setfile() copies all the attributes as correctly as possible (as
specified by POSIX), and we sometimes messed up the up the mode by
setting it again. Also, if the file is immutable, then setting the
mode again gave spurious errors (PR 20646).
- !pflag case. If the target is created, POSIX requires it to not
have the set[ug]id bits, but we sometimes copied them from the source.
If the target already exists, POSIX requires its mode to be unchanged,
but we sometimes copied the whole mode from the source.
PR: 20646
MFC after: 4 weeks
errexit (-e) processing. This solves a problem where 'make clean' would
fail with an unspecified error in certain automake-generated makefiles.
Reviewed by: no objections from -hackers...
MFC after: 2 weeks
``chown -h owner symlink'' did not set the symlink's owner
if the file the symlink points to already had that owner:
# ls -l alink afile
-rw-r--r-- 1 nobody ru 0 May 31 14:14 afile
lrwxr-xr-x 1 root ru 5 May 31 14:14 alink -> afile
# ./chown -h -v nobody alink
# ls -l alink afile
-rw-r--r-- 1 nobody ru 0 May 31 14:14 afile
lrwxr-xr-x 1 root ru 5 May 31 14:14 alink -> afile
Similarly for chgrp(1) and chmod(1).
in okname() in util.c and second, returning != 0 when you do have an
error from okname in two places in rcp.c.
Thanks to Garrett for the POSIX defintion of valid login and group names.
PR: bin/25757
MFC after: 3 weeks
error caused by the -1 being on the wrong side of the comparison.
This would not cause an overflow, as near as I can tell, because we
truncate later anyway. We'd just fail to get a diagnostic for 1024
and 1025 byte file names.
This is required by symlink(7), ``Commands not traversing a file tree''
subsection, third paragraph:
: It is important to realize that this rule includes commands which may
: optionally traverse file trees, e.g. the command ``chown file'' is
: included in this rule, while the command ``chown -R file'' is not.
For chown(8) and chgrp(1), this is also is compliance with the latest
POSIX 1003.1-200x draft.
MFC after: 1 week
and remove the setgid operator bit from the installed binary: if you want
to view free disk space on an unmounted device, you should have read
permissions to access it.
Reviewed by: phk
are:
* Implement cpio compatibility mode when pax is invoked as cpio
* Extend tar compatibility mode to cover many of the GNU tar single-letter
options (bzip2 mode, aka -y/-j is not present in OpenBSD). When
invoked as tar, pax is now full-featured enough for use by the ports
collection to extract distfiles and create packages.
* Many bug fixes to the operation of pax and the tar compatibility modes
* Code fixes for things like correct string buffer termination.
I tried to preserve existing FreeBSD fixes to this utility; please let me
know if I have inadvertently spammed something.
and compress) to pax when used in tar mode (invoked as 'tar') for
compatibility with GNU tar.
bzip2 functionality for further GNU tar compatibility will be added at a
later date.
Note in the manpage that -z is non-standard.
Obtained from: OpenBSD
Reviewed by: -hackers
MFC after: 2 weeks
required by POSIX.1e. This maintains the current 'struct acl'
in the kernel while providing the generic external acl_t
interface required to complete the ACL editing library.
o Add the acl_get_entry() function.
o Convert the existing ACL utilities, getfacl and setfacl, to
fully make use of the ACL editing library.
Obtained from: TrustedBSD Project
now compile/work on any POSIX.1e-compliant implementation (also tested
against the current Linux patches).
Review by: rwatson
Obtained from: TrustedBSD Project
: LC_TIME This variable shall determine the format and
: contents of date and time strings when the -v
: option is specified.
Developers took this wrong. LC_TIME specifies the locale
name, not the ``format'' argument of strftime().
Oops:
pax -w -f /tmp/foo /dev/null
LC_TIME=de_DE.ISO_8859-1 pax -v -f /tmp/foo
When a child is receiving SIGSTOP, eval continues with the next
command. While that is correct for the interactive case (Control-Z
and you get the prompt back), it is wrong for a shellscript, which
just continues with the next command, never again waiting for the
stopped child. Noted when childs from cronjobs were stopped, just to
make more processes (by wosch).
The fix is not to return from a job wait when the wait returned for a
stopped child while in non-interactive mode. This bahaviour seems to
be what bash2 and ksh implement. I tested for correct behaviour for
finnaly killing the child with and without forgrounding it first.
When not foregrouding before killing, the shell continues with the
script, which is what the other shells do as well.
Reviewed by: Silence on -current
This makes "mkdir /nonexistant/foo" complain that /nonexistant
doesn't exist rather than /nonexistant/foo which doesn't make much
sense.
Submitted (in a different form) by: W.H.Scholten <whs@xs4all.nl>
no longer contains kernel specific data structures, but rather
only scalar values and structures that are already part of the
kernel/user interface, specifically rusage and rtprio. It no
longer contains proc, session, pcred, ucred, procsig, vmspace,
pstats, mtx, sigiolst, klist, callout, pasleep, or mdproc. If
any of these changed in size, ps, w, fstat, gcore, systat, and
top would all stop working. The new structure has over 200 bytes
of unassigned space for future values to be added, yet is nearly
100 bytes smaller per entry than the structure that it replaced.
This lets you resolve pathnames to their underlying physical path:
critter# realpath /sys/kern/subr_disk.c
/freebsd/src/sys/kern/subr_disk.c
Update the pwd man-page slightly.
- The ability to specify elements by volume tag instead of their actual
physical location. e.g., instead of:
chio move slot 3 slot 4
you would now use:
chio move voltag FOO slot 4
- The ability to return an element to its previous location, as specified
by the source element. e.g., instead of:
chio move drive 0 slot 4
you would now use:
chio return drive 0
or
chio return voltag FOO
These features will obviously only work with changers that support volume
tags and/or source element IDs. chio(1) should fail gracefully if the user
attempts to use these new features and the source element ID or volume tag
are not found.
PR: bin/21178
Submitted by: "C. Stephen Gunn" <csg@waterspout.com>
Reviewed by: ken
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
Serious fix still needed, see discussion on -current
(Subject: /bin/sh dumps core with here-document of 8bit text)
Problem in this code originally spotted by
Jun Kuriyama <kuriyama@FreeBSD.org>
growstackblock() sometimes relocates a stack_block considered empty
without properly relocating stack marks referencing that block.
The first call to popstackmark() with the unrelocated stack mark
as argument then causes sh to abort.
Relocating the relevant stack marks seems to solve this problem.
The patch changes the semantics of popstackmark() somewhat. It can
only be called once after a call to setstackmark(), thus cmdloop() in
main.c needs an extra call to setstackmark().
PR: bin/19983
Submitted by: Tor.Egge@fast.no
Reviewed by: Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
flag has been depricated, although it still works with a warning
message, and replaced with an environment variable CLICOLOR (command
line interface colour). This could be used by other tools that
want to be able to control colour output.
In addition if the environment variable CLICOLOR_FORCE is defined
colour sequences are output irrespective of whether the output is
directed to a terminal (as long as TERM references a colour capable
terminal of course ;)
PR: bin/20291 and bin/20483
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
in committers (Message-Id: <72836.964344168@axl.ops.uunet.co.za>).
Also cleaned up a .Pq macro which was causing problems previous
to the original update I made.
Reviewed by: sheldonh
Approved by: jkh
option already supported octal. Add a comment to the -r option
in the man page so it's a bit more specific.
Discrepancy brought to my attention by: sasdrq@unx.sas.com
Approved by: jkh
on different file systems.
PR: bin/12375
Submitted by: Takashi SHIRAI <shirai@nintendo.co.jp>
No response by: steve
No problem with: building 5-current world
* remove hard sentence breaks
* use of Fl with Ar if argument available
* Dq -> Sq where better
* Ql -> Dq and Ql -> Fa where better
* include sections to Xr macro
* It Ar .ss -> It Ar ss
fixes (very important in this case). Version 1.40 should be discarded.
This version includes the language diffs. To receive them, use
cvs diff [-u] -r 1.39 -r 1.41
usage of .Xr and removal of hard sentence breaks).
PR: 18880
Submitted by: Christian Weisgerber <naddy@unix-ag.uni-kl.de>
Obtained from: OpenBSD (in parts)
used to extract modified boot hints to make loader(8)-time changes
"sticky". It tries to use \ style quoting so that it can be used directly
with foo.conf files. It can also extract specific variables.
ps(1) should not be returning a success code (0), it should return an
error code (1). This was fixed on OpenBSD over 3 years ago.
PR: 19069
Submitted by: Jim Sloan <odinn@atlantabiker.net>
Reviewed by: rwatson
terminal emulator.
As pointed out by jhb, a more scalable solution would be preferable
when multiple applications in the base system begin linking against
libh.
Submitted by: Doug Barton <DougB@gorean.org>
mark up a sample invocation, since it is not a command internal to the
described utility.
Do not use Ar (argument) to mark up something which is not an argument
to the utility or one of its internal commands.
