that we allow all possible jail IPs as source address rather than
forcing the "primary". While IPv6 naturally has source address
selection, for legacy IP we do not go through the pain in case
IP_HDRINCL was not set. People should bind(2) for that.
This will, for example, allow ping(|6) -S to work correctly for
non-primary addresses.
Reported by: (ten 211.ru)
Tested by: (ten 211.ru)
MFC after: 4 days
addresses while walking the IPv6 address list if in the jail case
something is connecting to ::1.
Reported by: Pieter de Boer (pieter thedarkside.nl)
Tested by: Pieter de Boer (pieter thedarkside.nl)
MFC after: 4 days
prevented the link-layer entry from being freed.
In both in.c and in6.c (though that code path seems to be basically dead)
plug a reference leak in case of a pending callout being drained.
In if_ether.c consistently add a reference before resetting the callout
and in case we canceled a pending one remove the reference for that.
In the final case in arptimer, before freeing the expired entry, remove
the reference again and explicitly call callout_stop() to clear the active
flag.
In nd6.c:nd6_free() we are only ever called from the callout function and
thus need to remove the reference there as well before calling into
llentry_free().
In if_llatbl.c when freeing entire tables make sure that in case we cancel
a pending callout to remove the reference as well.
Reviewed by: qingli (earlier version)
MFC after: 10 days
Problem observed, patch tested by: simon on ipv6gw.f.o,
Christian Kratzer (ck cksoft.de),
Evgenii Davidov (dado korolev-net.ru)
PR: kern/144564
Configurations still affected: with options FLOWTABLE
being embedded is in fact link-local, before attempting to embed it.
Note that this operation is a side-effect of trying to avoid recursion on
the IN6 scope lock.
PR: 144560
Submitted by: Petr Lampa
MFC after: 3 days
* Fix handling of mapping arrays when draining mbufs or processing
FORWARD-TSN chunks.
* Cleanup code (no duplicate code anymore for SACKs and NR-SACKs).
Part of this code was developed together with rrs.
MFC after: 2 weeks.
have the delayed function take an argument as to the offset
to the SCTP header. This allows it to work for V4 and V6.
This of course means changing all callers of the function
to either pass the header len, if they have it, or create
it (ip_hl << 2 or sizeof(ip6_hdr)).
PR: 144529
MFC after: 2 weeks
no delayed checksum was added to the ip6 output code. This
causes cards that do not support SCTP checksum offload to
have SCTP packets that are IPv6 NOT have the sctp checksum
performed. Thus you could not communicate with a peer. This
adds the missing bits to make the checksum happen for these cards.
PR: 144529
MFC after: 2 weeks
whether to use source address selection (default) or the primary
jail address for unbound outgoing connections.
This is intended to be used by people upgrading from single-IP
jails to multi-IP jails but not having to change firewall rules,
application ACLs, ... but to force their connections (unless
otherwise changed) to the primry jail IP they had been used for
years, as well as for people prefering to implement similar policies.
Note that for IPv6, if configured incorrectly, this might lead to
scope violations, which single-IPv6 jails could as well, as by the
design of jails. [1]
Reviewed by: jamie, hrs (ipv6 part)
Pointed out by: hrs [1]
MFC After: 2 weeks
Asked for by: Jase Thew (bazerka beardz.net)
for the interface address. This marker is necessary to properly support
PPP types of links where multiple links can have the same local end
IP address. The IFA_RTSELF flag bit maps to the RTF_HOST value, which
was combined into the route flag bits during prefix installation in
IPv6. This inclusion causing the prefix route to be unusable. This
patch fixes this bug by excluding the IFA_RTSELF flag during route
installation.
MFC after: 5 days
same interface. The first address will install the prefix route into
the kernel routing table and that prefix will be marked as on-link.
Without RADIX_MPATH enabled, the other address aliases of the same
prefix will update the prefix reference count but no other routes
will be installed. Consequently the prefixes associated with these
addresses would not be marked as on-link. As such, incoming packets
destined to these address aliases will fail the ND6 on-link check
on input. This patch fixes the above problem by searching the kernel
routing table and try to find an on-link prefix on the given interface.
MFC after: 5 days
IFF_POINTOPOINT link types. The reason was due to the routing
entry returned from the kernel covering the remote end is of an
interface type that does not support ARP. This patch fixes this
problem by providing a hint to the kernel routing code, which
indicates the prefix route instead of the PPP host route should
be returned to the caller. Since a host route to the local end
point is also added into the routing table, and there could be
multiple such instantiations due to multiple PPP links can be
created with the same local end IP address, this patch also fixes
the loopback route installation failure problem observed prior to
this patch. The reference count of loopback route to local end would
be either incremented or decremented. The first instantiation would
create the entry and the last removal would delete the route entry.
MFC after: 5 days
with SSM MLDv2 by default.
This is current practice and complies with RFC 4604, as well as being
required by production IPv6 networks in Japan.
The behaviour may be disabled by setting the net.inet6.mld.use_allow
sysctl/tunable to 0.
Requested by: Hideki Yamamoto
MFC after: 1 week
if (jailed(cred))
left. If you are running with a vnet (virtual network stack) those will
return true and defer you to classic IP-jails handling and thus things
will be "denied" or returned with an error.
Work around this problem by introducing another "jailed()" function,
jailed_without_vnet(), that also takes vnets into account, and permits
the calls, should the jail from the given cred have its own virtual
network stack.
We cannot change the classic jailed() call to do that, as it is used
outside the network stack as well.
Discussed with: julian, zec, jamie, rwatson (back in Sept)
MFC after: 5 days
Don't allow joins w/o source on an existing group.
This is almost always pilot error.
We don't need to check for group filter UNDEFINED state at t1,
because we only ever allocate filters with their groups, so we
unconditionally reject such calls with EINVAL.
Trying to change the active filter mode w/o going through IPV6_MSFILTER
is also disallowed.
MFC after: 1 day
Tighten input checking in in6p_join_group():
* Don't try to use the source address, when its family is unspecified.
* If we get a join without a source, on an existing inclusive
mode group, this is an error, as it would change the filter mode.
Fix a problem with the handling of in6_mfilter for new memberships:
* Do not rely on im6f being NULL; it is explicitly initialized to a
non-NULL pointer when constructing a membership.
* Explicitly initialize *im6f to EX mode when the source address
is unspecified.
This fixes a problem with in_mfilter slot recycling in the join path.
MFC after: 1 day
Fix an obvious logic error in the IPv4 multicast leave processing,
where the filter mode vector was not updated correctly after the leave.
MFC after: 1 day
we did not add. Call LLE_REMREF() only when callout_stop()
actually canceled a pending callout.
- callout_reset() may cancel a pending callout. When
callout_reset() canceled a pending callout, call LLE_REMREF()
to drop a reference for the canceled callout.
MFC after: 1 week
Adding a tentative address is useless.
- Comment out a confused warning message when
in6_ifattach_linklocal() fails. This can occur when the
interface does not support ioctl(SIOCAIFADDR) (interfaces
associated with 802.11 wireless network device drivers, for
example).
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.
Sitting aroung in tree waiting to commit for: 2 months
MFC after: 2 months
Note that when the interface has ND6_IFF_IFDISABLED, a newly-added
address is always marked as IN6_IFF_TENTATIVE so that the interface
can perform DAD after the ND6_IFF_IFDISABLED is cleared.
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.
Reviewed by: bz
MFC after: immediately
automatic link-local address configuration:
- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
global knob. The default value of the sysctl is 0.
- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
sysctl net.inet6.ip6.auto_linklocal to one for its default
value. The default value of the sysctl is 1.
- Make ND6_IFF_IFDISABLED more robust. It can be used to disable
IPv6 functionality of an interface now.
- Receiving RA is allowed if ip6_forwarding==0 *and*
ND6_IFF_ACCEPT_RTADV is set on that interface. The former
condition will be revisited later to support a "host + router" box
like IPv6 CPE router. The current behavior is compatible with
the older releases of FreeBSD.
- The ifconfig(8) now supports these ND6 flags as well as "nud",
"prefer_source", and "disabled" in ndp(8). The ndp(8) now
supports "auto_linklocal".
Discussed with: bz and jinmei
Reviewed by: bz
MFC after: 3 days
scenario where an anycast address is assigned on one interface,
and a global address with the same scope is assigned on another
interface. In other words, the interface owns the anycast
address has only the link-local address as one other address.
Without this patch, "ping6" the anycast address from another
station will observe the source address of the returned ICMP6
echo reply has the link-local address, not the global address
that exists on the other interface in the same node.
Reviewed by: bz
MFC after: immediately
- Interface link-local address is not reachable within the
node that owns the interface, this is due to the mismatch
in address scope as the result of the installed interface
address loopback route. Therefore for each interface
address loopback route, the rt_gateway field (of AF_LINK
type) will be used to track which interface a given
address belongs to. This will aid the address source to
use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
only for validation reason. Doing so will eliminate as much
of the special case (loopback addresses) handling code
as possible, however, these empty nd6 entries should not
be returned to the userland applications such as the
"ndp" command.
Since both of the above issues contain common files, these
files are committed together.
Reviewed by: bz
MFC after: immediately
configured prefixes. Since these statically configured prefixes
do not have any associated advertising routers, these prefixes
are treated as unreachable and those prefix routes are deleted
from the routing table. Therefore bypass prefixes that are not
learned from router advertisements during prefix on-link check.
Reviewed by: hrs
an IPv6 address assigned to it, and if an incoming packet received on
one interface has a packet destination address that belongs to another
interface, the routing table is consulted to determine how to reach this
packet destination. Since the packet destination is an interface address,
the route table will return a host route with the loopback interface as
rt_ifp. The input code must recognize this fact, instead of using the
loopback interface, the input code performs a search to find the right
interface that owns the given IPv6 address.
Reviewed by: bz, gnn, kmacy
MFC after: immediately
list/index locks, to protect link layer address tables. This avoids
lock order issues during interface teardown, but maintains the bug that
sysctl copy routines may be called while a non-sleepable lock is held.
Reviewed by: bz, kmacy
MFC after: 3 days
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
address is configured with a /128 prefix. This is no longer necessary due
to r192011. In fact that code conflicts with r192011. This patch removes
the host route installation when detecting the /128 prefix, and instead
let the code added by r192011 to install the loopback route for that IPv6
interface address.
Reviewed by: bz
Approved by: re
all pertinent statatistics for the subsystem. These structures are
sometimes "borrowed" by kernel modules that require a place to store
statistics for similar events.
Add KPI accessor functions for statistics structures referenced by kernel
modules so that they no longer encode certain specifics of how the data
structures are named and stored. This change is intended to make it
easier to move to per-CPU network stats following 8.0-RELEASE.
The following modules are affected by this change:
if_bridge
if_cxgb
if_gif
ip_mroute
ipdivert
pf
In practice, most of these statistics consumers should, in fact, maintain
their own statistics data structures rather than borrowing structures
from the base network stack. However, that change is too agressive for
this point in the release cycle.
Reviewed by: bz
Approved by: re (kib)
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
