Previously, the following sequence of events was feasible under some
circumstance:
bectl create test
bectl activate test
# the test BE dataset gets promoted and set as bootfs
bectl destroy test
I was unable to reproduce the destroy succeeding, but we should be rejecting
this before it even gets to libzfs because it would leave the system in an
inconsistent state. Forcing the user to be explicit as to which environment
should be activated instead is much better.
Reported by: Graham Perrin <grahamperrin@gmail.com>
MFC after: 3 days
usr/share/dict/eign is removed unconditionally as of r319664, so it no
longer needs to be in OptionalObsoleteFiles.
PR: 230353
Reported by: philippe.michel7 sfr.fr
setting the data prior to setting up the interrupt. Now we only set
the cookie afterwards, and that (a) cannot be helpd and (b) isn't used
in the ISR.
PR: 147127
Submitted by: hps@
On system with Celeron 1.5GHz CPU, sometimes when a PCMCIA to Compact Flash
adapter containing a Compact Flash card is inserted in the cardbus slot the
system hangs. This problem has not been observed in systems with a 2.8GHz
XEON CPU or faster.
Analysis of the cbb driver shows functional interrupts are routed to PCI
BEFORE the interrupt handler for functional interrupts has been registered.
Fix applied as described in the bug.
PR: 128040
Submitted by: Arthur Hartwig
Use BUS_DMA_NOWAIT for loads at initialization time.
Report actual numeric error code if any problem occurs at the
initialization.
Reported and tested by: pho
Reviewed by: mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18741
On 32bit platforms it is possible to have (much) more physical RAM
than is mappable into single address space. In this case liblzma
scales the value into a request to mmap more address space than it is
theoretically possible.
Reported and tested by: pho
Reviewed by: delphij
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
never been used on any platform that ipfilter has been on. However
it looks like it could be a useful utility, therefore there are plans
to make it a port one day. It lacks a man page as well.
MFC after: 1 month
This change allows to determine power source via sysctl or /dev/apm
when devd(8) is running (used by default).
Based on patch from PR; other changes on top of it:
- '-f' (force) -> '-s' (source) parameter renaming;
- allow 'apm' -> 'devd' transition when '-s devd' is set
(if APM is enabled);
- man page update.
Checked on amd64 with -s devd / sysctl and apm
(an extra build with forced USE_APM define set was done)
PR: 125707
Submitted by: Konstantin Stepanov <milezv@yandex.ru>
Reviewed by: bcr, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18742
Originally intended as 'in case in needs to be re-invoked', but it was later
decided (by myself) that 're-invoke itself' makes it more clear that the
script is expected to use this in a way.
Reported by: Jose Luis Duran (jlduran @ github)
X-MFC-With: r342792
Some rc scripts in ports (e.g. uwsgi, apache, openvpn) allow for
'application profiles' that usually require the rc script to be invoked
again for each active profile. Because there's no consistent way to
determine the path because it differs between manual/service(8) invocations
and /etc/rc invocations, this leads to patterns like these:
- www/uwsgi hardcodes the script path
- security/openvpn guesses either $_file or $0 based on $0 = /etc/rc
Instead of forcing rc scripts to guess, provide an rc_service variable to
the scripts that gets set appropriately both for direct execution or when a
script is being executed via run_rc_script (e.g. /etc/rc).
This is our analog of an OpenRC variable with the same name, different case
(RC_SERVICE).
PR: 234614
Reported by: koobs
Reviewed by: dteske, jilles
MFC after: 3 days
These programs parse ND6 Router Advertisement messages; rtsold(8) has
required an SA, SA-14:20.rtsold, for a bug in this code. Thus, they
are good candidates for sandboxing.
The approach taken is to run the main executable in capability mode
and use Casper services to provide functionality that cannot be
implemented within the sandbox. In particular, several custom services
were required.
- A Casper service is used to send Router Solicitation messages on a
raw ICMP6 socket. Initially I took the approach of creating a
socket for each interface upon startup, and connect(2)ing it to
the all-routers multicast group for the interface. This permits
the use of sendmsg(2) in capability mode, but only works if the
interface's link is up when rtsol(d) starts. So, instead, the
rtsold.sendmsg service is used to transmit RS messages on behalf
of the main process. One could alternately define a service
which simply creates and connects a socket for each destination
address, and returns the socket to the sandboxed process. However,
to implement rtsold's -m option we also need to read the ND6 default
router list, and this cannot be done in capability mode.
- rtsold may execute resolvconf(8) in response to RDNSS and DNSSL
options in received RA messages. A Casper service is used to
fork and exec resolvconf(8), and to reap the child process.
- A service is used to determine whether a given interface's
link-local address is useable (i.e., not duplicated or undergoing
DAD). This information is supplied by getifaddrs(3), which reads
a sysctl not available in capability mode. The SIOCGIFCONF socket
ioctl provides equivalent information and can be used in capability
mode, but I decided against it for now because of some limitations
of that interface.
In addition to these new services, cap_syslog(3) is used to send
messages to syslogd.
Reviewed by: oshogbo
Tested by: bz (previous versions)
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17572
tws_passthru() was doing a copyin of a user-specified request
without validating its length, so a malicious request could overrun
the buffer. By default, the tws(4) device file is only accessible
as root.
admbug: 825
Reported by: Anonymous of the Shellphish Grill Team
Reviewed by: delphij
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18536
We have no option than trust INT13 ah=08 return code during the init phase.
PR: 234460
Reported by: Oleh Hushchenkov
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18723
out dead USB HUB devices by implementing an error counter, so that the USB
enumeration thread does not spend all its time reading from non-responding
devices, blocking user-space access in the end.
Tested by: Matthias Apitz <guru@unixarea.de>
MFC after: 1 week
Sponsored by: Mellanox Technologies
This follows the example of other Capsicumized programs in /sbin.
Reported by: Manfred Antar <manfredantar@gmail.com>
MFC with: r342699
Sponsored by: The FreeBSD Foundation
It seems that libkern/mcount.c is the only consumer of vm/pmap.h that
does not include machine/atomic.h. Make it work by bringing
machine/atomic.h when pmap.h is used for kernel non-asm .c file.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
newvers.sh takes upwards of 4-5 seconds to complete on trees checked
out from github, due to searching the entire history for non-existent
git-svn metadata. Similarly, if one does not check out notes, we
again search the entire history for notes. That makes newvers.sh very
slow for many github users.
To fix this in a fair way, limit the history search to the last 10K
commits: if you're more than 10K commits out of sync, then you've
forked the project, and our SVN rev is no longer very important to you.
Due to how git implements --grep in conjunction with -n, --grep has been
removed for performance reasons (git does not seem to limit its search
to the -n limit in this case, and takes just as long as it did with no
limit).
Reviewed by: emaste, imp
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18745
lib/csu/tests/dynamiclib requires libh_csu.so be built first. I'm not
sure this is the most correct/best way to address this but it solves
the issue in my testing.
PR: 233734
Sponsored by: The FreeBSD Foundation
With new sysctls (to the best of our ability do detect them). Restructured
smp.4 slightly for clarity (keep relevant stuff closer to the top) while
documenting.
Reviewed by: markj, jhibbits (ppc parts)
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18322
pmap_kextract().
pmap_kextract() can race with promotion/demotion on the kernel page
table, in which case current non-atomic 64bit read would see torn
value, breaking pmap_kextract(). pmap_kextract() would correctly
handle either promoted or demoted PDE, but not a mix where one word
is from a different state.
It requires PAE and > 4G memory to reproduce. We observed this in
real loads, both for intensive use of malloc(9)/free(9) where
vtoslab() returned invalid pointer to the slab, and with the use of
busdma_bounce, where incorrect page was bounced.
In collaboration with: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18714
As it does for recv*(2), MSG_DONTWAIT indicates that the call should
not block, returning EAGAIN instead. Linux and OpenBSD both implement
this, so the change makes porting easier, especially since we do not
return EINVAL or so when unrecognized flags are specified.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: tuexen
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18728
It is useful for inspecting tlb shootdown hangs. The smp_tlb_generation value
is available using regular ddb data inspection commands.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The MI kernel assumes that interrupts will not be enabled on APs until
after the first context switch. In particular, the problem was causing
occasional deadlocks during boot.
Remove an unneeded intr_disable() added in r335005.
Reviewed by: jhb (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18738
Perforce no longer offers a FreeBSD client and it not a viable VCS for
FreeBSD development. Remove p4 version logic to simplify newvers.sh in
advance of other changes.
Sponsored by: The FreeBSD Foundation
The function which processes Admin commands was not returning the
Command Specific value in Completion Queue Entry, Dword 0 (CDW0). This
effects commands such as Set Features, Number of Queues which returns
the number of queues supported by the device in CDW0. In this case, the
host will only create 1 queue pair (Number of Queues is zero based).
This also masked a bug in the queue counting logic.
Reviewed by: imp, araujo
Approved by: imp (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18703
Many size / length parameters in NVMe are "0's based", meaning, a value
of 0x0 represents 1, 0x1 represents 2, etc.. While this leads to an
efficient encoding, it can lead to subtle bugs. With respect to queues,
these parameters include:
- Maximum number of queue entries
- Maximum number of queues
- Number of Completion Queues
- Number of Submission Queues
To be consistent, convert all 0's based values from the host to 1's
based value internally. Likewise, covert internal 1's based values to
0's based values when returned to the host. This fixes an off-by-one bug
when creating IO queues and simplifies some of the code. Note that this
bug is masked by another bug.
While in the neighborhood,
- fix an erroneous queue ID check (checking CQ count when deleting SQ)
- check for queue ID of 0x0 in a few places where this is illegal
- clean up the Set Features, Number of Queues command and check for
illegal values
Reviewed by: imp, araujo
Approved by: imp (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18702
Consider the case where FreeBSD is checked out via Subversion with a
(perhaps unrelated) .git or .hg directory at a higher level - for
example,
.../.git
.../src/freebsd
Previously newvers obtained the SVN revision information via svnversion,
and then tried to obtain the SVN revision corresponding to the git or hg
commit, overwriting the existing information.
As a short term fix use a different variable for hg-svn or git-svn
information, setting $svn from hg or git info only if not empty.
Reported by: Matthias Apitz
Sponsored by: The FreeBSD Foundation
When presented with an arg string like '-l-', getopt_long will successfully
parse out the 'l' short option, then proceed to match '--' against the first
longopts entry as it later does a strncmp with len=0. This latter bit is
arguably another bug in itself, but presumably not a practical issue as all
callers of parse_long_options are already doing the right thing (except this
one pointed out).
An opt string like '-l-' should be considered malformed and throw a bad
argument rather than behaving as if '--' were passed. It cannot possibly do
what the invoker expects, and it's probably the result of a typo (ls -l- a)
rather than any intent.
Reported by: Tony Overfield <toverfield@yahoo.com>
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18616
