Commit Graph

48 Commits

Author SHA1 Message Date
Poul-Henning Kamp
0e8380df1f Avoid using dmesg to find devices, the buffer may not be big enough.
Reviewed by:	phk
Submitted by:	Mike Spengler <mks@networkcs.com>
1998-10-08 08:56:01 +00:00
Poul-Henning Kamp
7d5c779c86 Here are some scripts and man pages for configuring HARP ATM
interfaces.

Reviewed by:	phk
Submitted by:	Mike Spengler <mks@networkcs.com>
1998-10-06 19:24:31 +00:00
Martin Cracauer
47aabea273 rc.conf variable $amd_map_program needs to be eval'ed.
PR:		misc/7435
Submitted by:	David Wolfskill <dhw@whistle.com>
1998-09-16 20:38:23 +00:00
Joseph Koshy
61a4defd54 Turn off replies to ICMP echo requests for broadcast and multicast
addresses by default.

Add a knob "icmp_bmcastecho" to "rc.network" to allow this
behaviour to be controlled from "rc.conf".

Document the controlling sysctl variable "net.inet.icmp.bmcastecho"
in sysctl(3).

Reviewed by: dg, jkh
Reminded on -hackers by: Steinar Haug <sthaug@nethelp.no>
1998-09-15 10:49:03 +00:00
Poul-Henning Kamp
e5d237d4b9 tcp_extensions now only applies to RFC1323 1998-09-06 08:20:11 +00:00
Poul-Henning Kamp
a6587b5772 In /etc/rc.network, near line 242, setting up Kerberos,
variable "stash_flag" is set.  A few lines later, it is evaluated
as "stash_flags" with a trailing "s", and then a bit later the
singular version is unset.

PR:		7609
Reviewed by:	phk
Submitted by:	Walt Howard <howard@ee.utah.edu>
1998-08-14 06:55:17 +00:00
Brian Somers
f10b49c852 Add Id keyword. 1998-08-10 19:54:12 +00:00
Jacques Vidrine
e4e737cd85 Allow either an IP address or an interface to be specified in
the rc.conf variable ``natd_interface''.  rc.network will
determine whether it is an IP address or an interface name,
and invoke natd with the -a or -n flag as appropriate.

PR:				6947
Reviewed by:	jkh@FreeBSD.ORG
1998-07-08 15:40:53 +00:00
Steve Price
a164ecc61b Cleanup natd startup test.
PR:		6946
Submitted by:	Jacques Vidrine <n@nectar.com>
1998-06-14 16:31:03 +00:00
Jordan K. Hubbard
80b41362fb cosmetic: clean up startup messages and rearrange some options
to go in a more proper order.
1998-05-19 04:36:31 +00:00
Andreas Klemm
90f94d55c1 Overlooked, that newer naming convention is xxx_program instead of xxx_prog.
So changed it to ntpdate_program and xntpd_program.
Backout last change, now we have again named_program, sorry.
1998-05-06 17:36:16 +00:00
Andreas Klemm
a8f00855a1 Add variables for the ntpdate and xntpd program, you might want
to run the binaries from the new ntp v4 port.
1998-05-05 21:14:27 +00:00
Poul-Henning Kamp
4cb3dec38f Jean-Simon Pendry's paper on amd refers to the use of "ypcat -k"
against the "master map" to get the list of mount point/amd map
correspondences, and using that list as command-line arguments to start
amd.

When I tried to do this with the existing /etc/rc* scripts, I found that
I couldn't do this by modifying only /etc/rc.conf:  that file gets
sourced very early by /etc/rc, well before any networking functionality
is present, let alone NIS.  Further, I wasn't able to figure out a way
to use various levels & types of quoting to defer evaluation of the
string to a point subsequent to NIS initialization.

As a result, I resorted to hacking /etc/rc.network -- but I did it in a
way that ought to be reasonably general, and avoid breakage for anyone
else.

PR:		6387
Reviewed by:	phk
Submitted by:	David Wolfskill <dhw@whistle.com>
1998-04-26 06:32:13 +00:00
Brian Somers
252ba33d3c Add natd support.
PR:		6339
Submitted by:	cdillon@wolves.k12.mo.us
1998-04-18 10:27:19 +00:00
Mark Murray
c1d639d22f Enable the SecureRPC bits in rc.conf, if the Administrator wants them. 1998-04-12 09:47:43 +00:00
Daniel O'Callaghan
9662bb4f03 Submitted by: bde
Back out last brain blip.
1998-03-13 22:03:03 +00:00
Daniel O'Callaghan
9f97abfa0e Change examples for Cyclades cards (c -> c0) to fit with reality. 1998-03-13 13:33:09 +00:00
Jordan K. Hubbard
115748d91d Allow rarpd to be started from rc.conf
PR:		5457
Submitted by:	Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
1998-03-09 08:50:30 +00:00
Brian Somers
71d854f63b Remove useless argument to ``. start_if.$ifn''
Pointed out by: Tim Tsai <tim@futuresouth.com>
1998-02-20 14:45:06 +00:00
Guido van Rooij
75e7ccb83d Add 2 new rc.conf variables:
forward_sourceroute : controls setting of existing net.inet.ip.sourceroute
accept_sourceroute : control setting of new net.inet.ip.accept_sourceroute
1998-02-16 19:21:32 +00:00
Alexander Langer
dbe11fd7dd Avoid using grep when determining ipfw's default policy -- it may not
be available at this stage of the boot if /usr is NFS mounted.
1998-02-14 04:12:23 +00:00
Alexander Langer
ad4463e18b Don't assume that IP services are disabled just because firewall_enable
is not set to YES in rc.conf.

Noticed by:	Mikael Karpberg <karpen@ocean.campus.luth.se>
1998-02-07 04:56:56 +00:00
Garrett Wollman
0da25c39b2 Add an additional `named_program' variable so that we can easily choose
between 4.9.6 and the port of 8.x.
1998-02-01 00:20:56 +00:00
Alexander Langer
e2fad09954 Compare return code from ipfw against 0 for success instead of == 1
for error.

Pointed out by:	Matthew Thyer <thyerm@camtech.net.au>
1998-01-10 03:33:39 +00:00
David E. O'Brien
75d1a35307 MF 22s 1997-12-01 06:11:34 +00:00
Sean Eric Fagan
5a583f9c34 Allow the system to be configured to pass "-n" to kerberos and
kadmind or not; also, only run kadmind on a non-slave server.  Man
page for rc.conf is also updated.

Reviewed by:	Mark Murray
1997-11-07 20:45:48 +00:00
Daniel O'Callaghan
24e24b0737 Fix some problems in the rules file loading and need for modload detection.
Found by: "James E. Housley" <housley@pr-comm.com>
1997-09-18 22:43:48 +00:00
Daniel O'Callaghan
5f4feab696 Reviewed by: msmith, alex
Cosmetic changes to the loading of firewall rules and lkm.
1997-09-11 10:59:02 +00:00
Paul Traina
0235182616 Merge from 2.2 (tcp extensions in phase 1) 1997-07-06 00:33:34 +00:00
Jordan K. Hubbard
919d435ace Neaten up some things which were inconsistent, add a few more flags
to things which need them, general cleanup.
Submitted by:	Brian Somers <brian@awfulhak.org>
1997-05-19 07:46:51 +00:00
Jordan K. Hubbard
f843ab9ce8 Add arp_proxyall knob.
Submitted by:	Christoph Kukulies <kuku@gilberto.physik.RWTH-Aachen.DE>
1997-05-13 08:22:27 +00:00
Jordan K. Hubbard
0862a4aff9 Update the etc world from RELENG_2_2 which is now more up-to-date
(gotta get myself -current again, this is a drag).

Also-fixes-problems-noted-by: Wolfgang Helbig & Joerg Wunsch
1997-05-03 11:22:17 +00:00
Jordan K. Hubbard
8141a0b639 Ack, learn to spell "extentions" the same way in the same file.
Also make the output a little less cryptic for sysctl settings.

Suggested by:	bde
1997-05-01 20:28:18 +00:00
Jordan K. Hubbard
b14caa899a YAMF22
PR:		3456
1997-05-01 20:04:42 +00:00
Jordan K. Hubbard
9381bc85a2 YAMF22 1997-05-01 04:38:16 +00:00
Jordan K. Hubbard
4a2d437732 YAMF22 1997-04-28 05:51:57 +00:00
Jordan K. Hubbard
524a1478c8 Bring in rc file changes from -current. 1997-04-27 03:59:19 +00:00
Bruce Evans
968ffc72fc Fixed the Cyclades and Digiboard port numbers. 1997-03-10 14:17:49 +00:00
Peter Wemm
79403fe300 Revert $FreeBSD$ to $Id$ 1997-02-23 09:21:14 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Nate Williams
6951277803 Minor modifications to the PCCARD startup files and comments.
Submitted by:	The Nomads
1997-01-06 06:26:01 +00:00
Nate Williams
d867405fbe Renamed the relevant PC-Card support files to reflect the newest release. 1996-03-14 18:24:07 +00:00
Bruce Evans
9c03f905b9 Added support for Cyclades and Digiboard devices.
Submitted by:	Daniel O'Callaghan <danny@lynx.its.unimelb.edu.au>
                + mods by bde
1996-02-24 19:51:25 +00:00
Mike Pritchard
440cac3e51 Another round of spelling fixes. 1996-01-31 15:03:18 +00:00
Rodney W. Grimes
1f55ebbcd9 This is a purely cosmetic clean up. Fix many cut and paste problems that
had turned tabs into spaces.
1995-04-09 09:54:51 +00:00
Andrey A. Chernov
b49d97b636 Add drainwait option examples 1995-01-05 00:11:52 +00:00
Andrey A. Chernov
fc306b1c16 cua*0? --> cua*a? 1994-12-04 23:54:39 +00:00
Andrey A. Chernov
b3108fb8a1 Now rc.serial used for initial setup of serial lines 1994-06-04 00:44:00 +00:00