Commit Graph

31 Commits

Author SHA1 Message Date
Justin T. Gibbs
11b5ea7239 Since there have been so many reports of the Memory Mapped I/O to the
aic7xxx cards failing on certain motherboards, reverse the logic used to
control this feature.  AHC_FORCE_PIO is replaced with AHC_ALLOW_MEMIO.
GENERIC no longer needs to specify the AHC_FORCE_PIO option since this is
the default.
1996-11-16 01:09:20 +00:00
Nate Williams
a7320980f6 Removed (now unused) XT_KEYBOARD option. 1996-11-11 22:04:31 +00:00
Bruce Evans
1fe048505d Replaced I586_OPTIMIZED_BCOPY and I586_OPTIMIZED_BZERO with boot-time
negative-logic flags (flags 0x01 and 0x02 for npx0, defaulting to unset = on).
This changes the default from off to on.  The options have been in current
for several months with no problems reported.

Added a boot-time negative-logic flag for the old I5886_FAST_BCOPY option
which went away too soon (flag 0x04 for npx0, defaulting to unset = on).

Added a boot-time way to set the memory size (iosiz in config, iosize in
userconfig for npx0).

LINT:
Removed old options.  Documented npx0's flags and iosiz.

options.i386:
Removed old options.

identcpu.c:
Don't set the function pointers here.  Setting them has to be delayed
until after userconfig has had a chance to disable them and until after
a good npx0 has been detected.

machdep.c:
Use npx0's iosize instead of MAXMEM if it is nonzero.

support.s:
Added vectors and glue code for copyin() and copyout().
Fixed ifdefs for i586_bzero().
Added ifdefs for i586_bcopy().

npx.c:
Set the function pointers here.
Clear hw_float when an npx exists but is too broken to use.
Restored style from a year or three ago in npxattach().
1996-11-11 20:39:03 +00:00
Satoshi Asami
33c58c9f8f Remove option I586_FAST_BCOPY. The code will be included by default
if I586_CPU is defined.  Note there is a runtime check so the code
won't be run for non-Pentium CPUs anyway.

2.2 candidate, this code has been tested for almost half year in -current.
1996-11-08 02:38:44 +00:00
Paul Traina
7fe8c7a026 add in CONSPEED option 1996-11-02 02:25:22 +00:00
Justin T. Gibbs
1affda38c1 Add two new aic7xxx driver options:
AHC_FORCE_PIO - This forces the driver to use PIO even on systems that
	say they have memory mapped the controller's registers.  This
	seems to fix Ken Lam's problems.  I've also placed this option
	in the GENERIC kernel file so that we are guaranteed to install
	even on these flakey machines.

AHC_SHARE_SCBS - This option attempts to share the external SCB SRAM on
	the 398X controllers allowing a totoll of 255 non-paged SCBs.
	This doesn't work quite yet, so this option is mostly here to
	help 398X owners to experiment and give me feedback until this
	works properly.
1996-10-28 06:05:58 +00:00
Paul Traina
dcb21864dc Remove SC_KBD_PROBE_WORKS option and replace it with a simple run-time flag
bit (0x0008) in the sc driver configuration line.  This way it's easy to
boink a generic kernel.

Also, document and place in an opt_ file the #define's for overriding which
serial port is the system console.
Approved by:	sos
1996-10-23 07:29:44 +00:00
Bruce Evans
d6b9e17eb5 Improved non-statistical (GUPROF) profiling:
- use a more accurate and more efficient method of compensating for
  overheads.  The old method counted too much time against leaf
  functions.
- normally use the Pentium timestamp counter if available.
  On Pentiums, the times are now accurate to within a couple of cpu
  clock cycles per function call in the (unlikely) event that there
  are no cache misses in or caused by the profiling code.
- optionally use an arbitrary Pentium event counter if available.
- optionally regress to using the i8254 counter.
- scaled the i8254 counter by a factor of 128.  Now the i8254 counters
  overflow slightly faster than the TSC counters for a 150MHz Pentium :-)
  (after about 16 seconds).  This is to avoid fractional overheads.

files.i386:
permon.c temporarily has to be classified as a profiling-routine
because a couple of functions in it may be called from profiling code.

options.i386:
- I586_CTR_GUPROF is currently unused (oops).
- I586_PMC_GUPROF should be something like 0x70000 to enable (but not
  use unless prof_machdep.c is changed) support for Pentium event
  counters.  7 is a control mode and the counter number 0 is somewhere
  in the 0000 bits (see perfmon.h for the encoding).

profile.h:
- added declarations.
- cleaned up separation of user mode declarations.

prof_machdep.c:
Mostly clock-select changes.  The default clock can be changed by
editing kmem.  There should be a sysctl for this.

subr_prof.c:
- added copyright.
- calibrate overheads for the new method.
- documented new method.
- fixed races and and machine dependencies in start/stop code.

mcount.c:
Use the new overhead compensation method.

gmon.h:
- changed GPROF4 counter type from unsigned to int.  Oops, this should
  be machine-dependent and/or int32_t.
- reorganized overhead counters.

Submitted by:	Pentium event counter changes mostly by wollman
1996-10-17 19:32:31 +00:00
Bruce Evans
c20b324bb6 Put I*86_CPU defines in opt_cpu.h. 1996-10-09 19:47:44 +00:00
Bruce Evans
d656e316f8 Added new documented options I586_OPTIMIZED_BCOPY and I586_OPTIMIZED_BZERO.
Added old misnamed option I586_FAST_BCOPY in options.i386.

Added old undocumented CLK* and SI_DEBUG options in LINT.
1996-10-09 18:36:44 +00:00
Jordan K. Hubbard
d50a30076c Multiple changes stacked as one commit since they all depend on one another.
First, change sysinstall and the Makefile rules to not build the kernel
nlist directly into sysinstall now.  Instead, spit it out as an ascii
file in /stand and parse it from sysinstall later.  This solves the chicken-n-
egg problem of building sysinstall into the fsimage before BOOTMFS is built
and can have its symbols extracted.  Now we generate the symbol file in
release.8.

Second, add Poul-Henning's USERCONFIG_BOOT changes.  These have two
effects:

	1. Userconfig is always entered, rather than only after a -c
	   (don't scream yet, it's not as bad as it sounds).

	2. Userconfig reads a message string which can optionally be
	   written just past the boot blocks.  This string "preloads"
	   the userconfig input buffer and is parsed as user input.
	   If the first command is not "USERCONFIG", userconfig will
	   treat this as an implied "quit" (which is why you don't need
	   to scream - you never even know you went through userconfig
	   and back out again if you don't specifically ask for it),
	   otherwise it will read and execute the following commands
	   until a "quit" is seen or the end is reached, in which case
	   the normal userconfig command prompt will then be presented.

  How to create your own startup sequences, using any boot.flp image
from the next snap forward (not yet, but soon):

	% dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync <<WAKKA_WAKKA_DOO
USERCONFIG
irq ed0 10
iomem ed0 0xcc000
disable ed1
quit
WAKKA_WAKKA_DOO


Third, add an intro screen to UserConfig so that users aren't just thrown
into this strange screen if userconfig is auto-launched.  The default
boot.flp startup sequence is now, in fact, this:

	USERCONFIG
	intro
	visual

(Since visual never returns, we don't need a following "quit").

Submitted-By: phk & jkh
1996-10-05 10:44:07 +00:00
Paul Traina
14b7c0f2f9 add SC_SPLASH_SCREEN to opt_syscons.h (sigh) 1996-10-02 03:48:09 +00:00
Paul Traina
6e702c9964 Document the Adaptec driver options for tagged command queueing and SCB
paging (with a warning not to use SCB paging) and create an opt_aic7xxx.h
file for these options.
1996-10-01 03:01:06 +00:00
Poul-Henning Kamp
96fc6efbe3 Make userconfig two (default: on) options:
USERCONFIG to enable
	VISUAL_USERCONFIG to get the gui stuff too.
Requested by: pst
1996-09-11 19:53:45 +00:00
Bruce Evans
dad0de774e Removed bogus LARGMEM code and option. The code paniced when
biosextmem > 65536, but biosextmem is a 16-bit quantity so it is
guaranteed to be < 65536.  Related cruft for biosbasemem was
mostly cleaned up in rev.1.26.
1996-09-10 23:07:04 +00:00
Bruce Evans
683cbdf4af Fixed spelling of new SC_KBD_PROBE_WORKS option in options.i386.
It worked because it is spelled correctly in LINT.

Added old obscure syscons options MAXCONS, SLOW_VGA and XT_KEYBOARD.
This file should be sorted both alphabetically and on the module
name by using a consistent prefix for each module, but there is no
consistency in the old options.  E.g., MAXCONS is spelled PCVT_NSCREENS
for pcvt.
1996-09-10 21:38:47 +00:00
Paul Traina
61238661b6 Add ATAPI_STATIC, ATAPI, and SC_KBD_PROBE_WORKS options. 1996-09-06 23:33:45 +00:00
Paul Traina
6d715e951e Put clock calibration #defines in opt_clock.h to ease reconfiguration 1996-06-11 16:02:55 +00:00
Bruce Evans
d03b40173c Hide options for emulators and static file systems in opt_dontuse.h.
These options only apply at config time.  Using them at compile time
would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
Bruce Evans
7c243b9add Removed nonexistent option "LINUX" (what's that :-). 1996-05-01 03:30:04 +00:00
Søren Schmidt
03475c250b Removed options MAXCONS & HARDFONT, they are no longer in use
(and havn't been for long, sigh)
1996-04-26 06:45:41 +00:00
Bruce Evans
803dda1724 Fixed `PCVT_FREEBSD=210'. 1996-04-13 16:50:23 +00:00
Bruce Evans
3745f80a48 Moved AUTO_EOI_[12] and most sio and pcvt options out of the makefile. 1996-04-11 21:18:49 +00:00
Garrett Wollman
d69e850255 Add support for Pentium and Pentium Pro performance counters.
(This code is as yet untested; to come after man page is written.)
This also adds inlines to cpufunc.h for the RDTSC, RDMSR, WRMSR, and RDPMC
instructions.  The user-mode interface is via a subdevice of mem.c;
there is also a kernel-size interface which might be used to aid
profiling.
1996-03-26 19:57:56 +00:00
Peter Wemm
226fd441c6 Delete recognition for COMPAT_LINUX - it's *gone* now.. :-) 1996-03-15 07:49:47 +00:00
Peter Wemm
d66a506616 Mega-commit for Linux emulator update.. This has been stress tested under
netscape-2.0 for Linux running all the Java stuff.  The scrollbars are now
working, at least on my machine. (whew! :-)

I'm uncomfortable with the size of this commit, but it's too
inter-dependant to easily seperate out.

The main changes:

COMPAT_LINUX is *GONE*.  Most of the code has been moved out of the i386
machine dependent section into the linux emulator itself.  The int 0x80
syscall code was almost identical to the lcall 7,0 code and a minor tweak
allows them to both be used with the same C code.  All kernels can now
just modload the lkm and it'll DTRT without having to rebuild the kernel
first.  Like IBCS2, you can statically compile it in with "options LINUX".

A pile of new syscalls implemented, including getdents(), llseek(),
readv(), writev(), msync(), personality().  The Linux-ELF libraries want
to use some of these.

linux_select() now obeys Linux semantics, ie: returns the time remaining
of the timeout value rather than leaving it the original value.

Quite a few bugs removed, including incorrect arguments being used in
syscalls..  eg:  mixups between passing the sigset as an int, vs passing
it as a pointer and doing a copyin(), missing return values, unhandled
cases, SIOC* ioctls, etc.

The build for the code has changed.  i386/conf/files now knows how
to build linux_genassym and generate linux_assym.h on the fly.

Supporting changes elsewhere in the kernel:

The user-mode signal trampoline has moved from the U area to immediately
below the top of the stack (below PS_STRINGS).  This allows the different
binary emulations to have their own signal trampoline code (which gets rid
of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so
that the emulator can provide the exact "struct sigcontext *" argument to
the program's signal handlers.

The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which
have the same values as the re-used SA_DISABLE and SA_ONSTACK which are
intended for sigaction only.  This enables the support of a SA_RESETHAND
flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal
semantics where the signal handler is reset when it's triggered.

makesyscalls.sh no longer appends the struct sysentvec on the end of the
generated init_sysent.c code.  It's a lot saner to have it in a seperate
file rather than trying to update the structure inside the awk script. :-)

At exec time, the dozen bytes or so of signal trampoline code are copied
to the top of the user's stack, rather than obtaining the trampoline code
the old way by getting a clone of the parent's user area.  This allows
Linux and native binaries to freely exec each other without getting
trampolines mixed up.
1996-03-02 19:38:20 +00:00
Peter Wemm
4bd4912865 Add more options into the conf/options and i386/conf/options.i386 files
and the #include hooks so that 'make depend' is more useful.  This
covers most of the options I regularly use (but not all) and some other
easy ones.
1996-03-02 18:24:13 +00:00
Peter Wemm
d92566062f Choose a different name to hold the option definition.. The original one
was overlapping with another file, and making some undesirable behavior a
little worse - it's triggering a bug in config that appears to have been
there for some time (before the options files, anyway.)
1996-01-06 23:10:57 +00:00
Garrett Wollman
8890984dc9 Convert BOUNCE_BUFFERS and BOUNCEPAGES to new option scheme. 1996-01-05 20:12:53 +00:00
Garrett Wollman
a73af3a214 convert the math emulation to use the new-style options. 1996-01-04 19:51:50 +00:00
Garrett Wollman
db6a20e23e Converted two options over to the new scheme: USER_LDT and KTRACE. 1996-01-03 21:42:35 +00:00