number of banks, rows and columns the SDRAMC is programmed to access
to determine the RAM size for the board, rather than hard-wiring it to
be 32MB. My company's board with 64MB now probes correctly, as does
the KB9202 with only 32MB. This means that to detect the right memory
size, our boot loader must correctly initialize these values. This is
a fairly safe assumption because the boot loader has to initialize
SDRAM already, and it isn't really possible to change this register
after we've accessed SDRAM.
when we're about to call kdb_trap() because the latter MI
function can disable interrupts by itself now.
Pointed out by: bde
X-MFC remark: depends on kern/subr_kdb.c#1.18
Sponsored by: RiNet (Cronyx Plus LLC)
in setsockopt so that they can be compared correctly against negative
values. Passing in a negative value had a rather negative effect
on our socket code, making it impossible to open new sockets.
PR: 98858
Submitted by: James.Juran@baesystems.com
MFC after: 1 week
memory location for already existing/initialized mutexes. With random
data in the memory location this fails (ie. after a soft reboot).
Reported by: brueffer, YAMAMOTO Shigeru
Submitted by: YAMAMOTO Shigeru <shigeru-at-iij.ad.jp>
Use the method described in IA-32 Intel Architecture Software
Developer's Manual chapter 11.6.6 to get valid mxcsr bits,
use the mxcsr mask to clear invalid bits passed by user code.
order to - for example - apply firewall rules to a whole group of
interfaces. This is required for importing pf from OpenBSD 3.9
Obtained from: OpenBSD (with changes)
Discussed on: -net (back in April)
ACK the SYN as required by RFC793, rather than ignoring it. NetBSD
have had a similar change since 1999.
PR: 93236
Submitted by: Grant Edwards <grante@visi.com>
MFC after: 1 month
when the bit 22 is set to 1, CPUID with EAX=0 returns a maximum
value in EAX[7..0] of 3, when set to 0(default), CPUID with EAX=0
returns the number corresponding to the maximum standard function
supported. On my machine, BIOS sets the bit to 1 to make it to be
compatible with old OS, this causes dual-core Pentium-D (two
physical cores) to be identified as hyperthreading (two logical
cores) by function mp_topology().
offset or request size which is not a multiple of the sector size, make
sure that the bio is set to indicate that no data has actually been
transferred.
The result of this is that the file offset is no longer incremented for
these requests. The fact that the file offset was incremented broke
fdisk(8)'s probing of sector size for non-512 byte sector sizes.
Reviewed by: phk, cperciva
Submitted by: mdodd
MFC after: 2 weeks
for those upgrading from 4.x -> 5.x. It is therefore no longer
necessary because it is installed on 5.x and 6.x and one has to
upgrade from 6.x -> current, or at the very least 5.x (although not
supported, it can be made to work).
- Curitel PC5740 Wireless Modem (Verizon's PCMCIA card)
- Sierra MC5720 Wireless Modem (Built in to Thinkpad X60s)
The scanner in the PR is already supported.
PR: 98908
Submitted by: Michael Collette <metrol@metrol.net>
blinks by default. When the operating system (read: normally an Xbox
360) initializes the gamepad, the LED stops blinking.
Change our uhid code to do the same.
PR: 97169
Submitted by: Ed Schouten <ed@fxq.nl>
- Enable 4 automatic vchan's by default.
- Add some comments which provide ides/questions for improvement.
- Prefix some temporary sysctl's with an underscore to denote that it is not
an official API but a workaround until the real solution is implemented.
It is similar to debug.kdb.trap, except for it tries to cause a page fault
via a call to an invalid pointer. This can highlight differences between
a fault on data access vs. a fault on code call some CPUs might have.
This appeared as a test for a work \
Sponsored by: RiNet (Cronyx Plus LLC)
the return address on the stack and only then "dereferences" %pc.
Therefore, in the case of a call to an invalid address, we arrive
to the trap handler with the invalid value in tf_eip. This used
to prevent db_backtrace() from assigning the most recent and interesting
frame on the stack to the right spot in the right function, from
which the invalid call was attempted.
Try to detect and work around that by recovering the return address
from the stack.
The work-around requires the fault address be passed to db_backtrace().
Smuggle it as tf_err.
MFC after: 1 month
Sponsored by: RiNet (Cronyx Plus LLC)
The boot loader is supposed to leave this bit set to the right value
for the board. If this bit was set at attach time, use it to init the
config register correctly.
Note: this means the boot loader has to properly initialize it.
basically always violated) invariannts of soreceive(), which assume
that the first mbuf pointer in a receive socket buffer can't change
while the SB_LOCK sleepable lock is held on the socket buffer,
which is precisely what these functions do. No current protocols
invoke these functions, and removing them will help discourage them
from ever being used. I should have removed them years ago, but
lost track of it.
MFC after: 1 week
Prodded almost by accident by: peter
