Commit Graph

24 Commits

Author SHA1 Message Date
Baptiste Daroussin
7f5ddefe05 Add a savecore_enable variable support for the savecore rc script
By default set to 'YES' so it does not change the current behaviour for users,
this variable allows to decide to not extract crach dumps from the dump
device at boot time by setting it to "NO" in rc.conf.

Sponsored by:	Gandi.net
2016-04-29 12:23:56 +00:00
Lars Engels
6c1a5e837d - Add descriptions to most of the rc scripts. Those are mostly taken from their
daemon's manpage and probably improved.
- Consistently use "filesystem" not "file system".

Approved by:	bapt, brueffer
Differential Revision:	D452
2016-04-23 16:10:54 +00:00
Gavin Atkinson
9e9a57a307 After writing a kernel core dump into /var/crash, call sync(8).
If we panic again shortly after boot (say, within 30 seconds), any core
dump we wrote out may be lost on reboot.  In this situation, we really
want to keep that core file, as it may be the only way to have the issue
resolved.  Call sync(8) after writing out the core file and running
crashinfo(8), in the hope that these will not be lost if we panic
again.  sync(8) is only called in the case where there is a core dump
to be written out, so won't be called during normal boots.

Discovered by:	Trying to debug an IPSEC panic
MFC after:	1 week
2013-08-28 15:12:15 +00:00
Colin Percival
953bb3854c Fix typo in previous commit: Exit if */dev/dumpdev* does not exist, not if
*/bin/realpath* does not exist...

Submitted by:	markj
Pointy hat to:	cperciva
2013-03-19 05:08:25 +00:00
Colin Percival
510a7a8624 If dumpdev is AUTO but no dump device has been set -- i.e., there is no swap
space configured for rc.d/dumpon to designate for dumping -- then exit
silently rather than with a
> realpath: /dev/dumpdev: No such file or directory
error message.

An argument could be made that we should print a (more informative) warning
message; but given that under the same conditions the rc.d/dumpon script will
already print a
> No suitable dump device was found
warning, it seems that printing an additional
> Dump device does not exist.  Savecore not run.
warning would be superfluous.
2013-03-19 04:42:04 +00:00
Pawel Jakub Dawidek
349d039bdb - When checking if a dump exists on the given device there is no need to
provide dump directory. Eliminate this redundant argument. This changes
  the usage, but the only risk here is that a warning will be printed
  about directory given as device.

- Update usage of -C option.

- When clearing dump header from the given device there is also no need to
  provide dump directory, although additional arguments for -c were not
  documented.

- Document that -v can be used with -c and that list of devices can be given.

Obtained from:	WHEEL Systems
2012-12-14 15:12:08 +00:00
Doug Barton
2822c33f8c This change does the following for the scripts that run up through
FILESYSTEMS (the default early_late_divider):
1. Move sysctl to run first
2. Move as many BEFOREs to REQUIREs as possible.
3. Minor effect, move hostid_save from right before mdconfig to right
   after.

A lot of the early scripts make use of sysctl one way or another so
running this first makes a lot of sense given that system-critical
values are often placed in sysctl.conf.

My original purpose for working on this was that while doing some
debugging on other stuff I noticed that the order of execution was
different in the first pass through the early scripts and the second.
In practice that doesn't matter because the scripts are not executed the
second time. However this _can_ result in problems if the difference in
the rcorder moves a script from the late section to the early section in
the second pass (which would mean the script would not get executed).
So, I wanted to make the order of execution of the scripts in the early
section more deterministic.

In the course of debugging the ordering problems I noticed that moving
the BEFOREs to REQUIREs prevented the changes in order from the first
pass to the second pass without having to make any substantial changes.
(Of course it's no secret that I think BEFORE should be avoided as much
as possible, but this is a good example of why.)

Reviewed by:	silence on freebsd-rc@
MFC after:	8.1-RELEASE
2010-05-19 19:03:19 +00:00
Doug Barton
70d4ef1ea1 In regards to the "Starting foo:" type messages at boot time, create and
employ a more generic solution, and use it in the individual rc.d scripts
that also have an $rc_quiet test:

1. Add check_startmsgs() to rc.subr.
2. In the rc.d scripts that use rc_quiet (and rc.subr) substitute
variations of [ -z "$rc_quiet" ] with check_startmsgs
3. In savecore add a trailing '.' to the end of the message to make it
more consistent with other scripts.
4. In newsyslog remove a : before the terminal '.' since we do not expect
there to be anything printed out in between to make it more consistent.
5. In the following scripts change "quotes" to 'quotes' where no variables
exist in the message: savecore pf newsyslog
6. In the following scripts substitute if/then/fi for the simpler (and
more consistent) check_startmsgs &&: faith stf
7. In the following scripts separate the "Starting foo:" from the terminal
'.' to make them more consistent: moused hostname pf
8. In nfsclient move the message to its own line to avoid a style bug
9. In pf rc_quiet does not apply to the _stop method, so remove the
test there.
10. In motd add 'quotes' around the terminal '.' for consistency
2009-10-10 22:17:03 +00:00
John Baldwin
a0f01ecb62 Add the ability to run /usr/sbin/crashinfo on a new core dump automatically
during boot.  Right now this is disabled by default, but it can be enabled
by setting 'crashinfo_enable=YES' in rc.conf.

MFC after:	2 weeks
2008-08-29 20:30:30 +00:00
Mike Makonnen
9300b74ce4 Remove the $DUMPDIR variable. It's redundant and the rest of the
script uses $dumpdir directly.
2008-07-06 08:31:29 +00:00
Mike Makonnen
f562910214 Make checking for the availability of core dumps work in the case
that $dumpdev is not set to "AUTO".

Reported by: Paul B. Mahol <onemda@gmail.com>
2008-07-06 07:51:29 +00:00
Mike Makonnen
2794059010 Run savecore(8) only if there is a core dump to save. If there is
no core dump hide the message to that effect behind $rc_quiet.
2008-06-23 20:54:32 +00:00
Mike Makonnen
94789e5ca4 Move a lot of diagnostic output behind $rc_quiet in scripts that
implement their own start command.
2008-06-23 04:46:54 +00:00
Doug Barton
e3c46a3332 Remove $NetBSD$ CVS tags. We no longer attempt to synch our rc.d files
with theirs, so this information doesn't need to be in the live file.
Having it in our CVS history is enough.
2007-12-08 07:20:23 +00:00
Dag-Erling Smørgrav
82a21971a6 - use realpath /dev/dumpdev instead of just /dev/dumpdev so messages
will show the real device name
- show different error messages for missing dump device and directory
2004-10-24 13:04:09 +00:00
Thomas Quinot
e30c35ed0c When dumpdev is set to 'auto', and a suitable swap device is found,
create a symbolic link /dev/dumpdev designating that device so
savecore can find and save a previous kernel dump.
2004-10-18 23:40:13 +00:00
Mike Makonnen
337338ee00 Remove the requirement for the FreeBSD keyword as it no longer
makes any sense.

Discussed with: dougb, brooks
MFC after: 3 days
2004-10-07 13:55:26 +00:00
Chad David
450e8255a1 Echo and pass dumpdev as the device argument to savecore.
PR: bin/51655
2004-03-18 15:18:20 +00:00
Pawel Jakub Dawidek
bd57d5b0f5 Mark scripts as not usable inside a jail by adding keyword 'nojail'.
Some suggestions from:	rwatson, Ruben de Groot <mail25@bzerk.org>
2004-03-08 12:25:05 +00:00
Mike Makonnen
82387f41ed Luke Mewburn has indicated that they (NetBSD) are not interested
in keeping the scripts under rc.d in sync with us. So, remove
NetBSD specific stuff (which made our scripts more complicated
than necessary).

The NetBSD ident string will be left intact, both for history and
also incase we wish to pull in future versions.
2004-01-17 10:59:43 +00:00
Mike Makonnen
1afce00360 Luke Mewburn has indicated that they (NetBSD) are not interested
in keeping the scripts under rc.d in sync with us. So, begin removal
of NetBSD specific stuff (which made our scripts more complicated
than necessary), starting with the NetBSD KEYWORD.
2004-01-17 10:16:38 +00:00
Gordon Tetlow
77e55efba0 Convert from ${CMD_OSTYPE} to ${OSTYPE}. This saves a shell invocation on
OS-dependent case switches.
2002-09-06 16:18:05 +00:00
Gordon Tetlow
27bc1b287e Merge in all the changes that Mike Makonnen has been maintaining for a
while. This is only the script pieces, the glue for the build comes next.

Submitted by:	Mike Makonnen <makonnen@pacbell.net>
Reviewed by:	silence on -current and -hackers
Prodded by:	rwatson
2002-06-13 22:14:37 +00:00
David E. O'Brien
9d62501fd8 Import the NetBSD 1.5 RC system.
Note that `rc' and `rc.shutdown' could not be imported because we already
have files with those names.
2001-06-16 07:16:14 +00:00