Commit Graph

132 Commits

Author SHA1 Message Date
Warner Losh
aa11a83ce3 remove now-redunant cardbus attachment lines. 2009-03-09 13:25:34 +00:00
John Baldwin
843994aee1 Add support for the single-port NetMos NM9835 serial adapter. The puc(4)
entry is a specific entry to override the generic NetMos entry so that
puc(4) will leave this device alone and let uart(4) claim it.

Submitted by:	Navdeep Parhar  nparhar @ gmail
Reviewed by:	marcel
MFC after:	1 week
2009-03-05 16:43:33 +00:00
Kevin Lo
13ae6dce6d Add support for the Sunix SUN1889-based dual parallel port card.
PR: kern/128219
Submitted by: Thinker K.F. Li <thinker at branda dot to>
2009-02-12 10:39:19 +00:00
Stanislav Sedov
0db1aa0bcb - Add support for Moxa Technologies CP-168EL/PCIe card.
Submitted by:	dmarck
MFC after:	1 week
2009-01-27 09:38:44 +00:00
Roman Kurakin
11a12794a9 Add support for the Oxford OX16PCI958-based card.
Note, that the patch provided with this card for the Linux states that
the card uses DEFAULT_RCLK * 2, while in fact it is '* 10'.  So probably
we should also use the subdevice/subvendord here. For now just ignore
that fact.

PR:		kern/129665
Submitted by:	bsam
Obtained from:	united efforst with bsam
2008-12-27 15:22:22 +00:00
Dag-Erling Smørgrav
0db885bbaf Add an entry for the "SIIG Cyber 4 PCI 16550", which is a four-port card
based on the OX16PCI954 chip with a non-standard clock.

MFC after:	3 days
2008-10-25 10:55:49 +00:00
Dag-Erling Smørgrav
c44bdcb048 Revert r179409; it breaks all OX16PCI954-based cards except the SIIG 4.
MFC after:	3 days
2008-10-13 12:28:33 +00:00
Andrew Thompson
858030c4a9 Add the Decision Computer Inc, PCCOM 8-port serial card.
PR:		kern/69730
Submitted by:	Darrin Smith
2008-08-22 00:13:17 +00:00
Andrew Thompson
46ce58c7f6 Add the VScom PCI-100L card.
PR:		kern/72352
Submitted by:	Thomas Nystrom
2008-08-22 00:12:08 +00:00
Andrew Thompson
0dc908e79c Add the Avlab Technology PCI IO 4S-850 4 port serial card.
PR:		kern/110797
Submitted by:	Trevor Roydhouse
2008-08-21 23:22:32 +00:00
Kirk McKusick
1454b5785e The SIIG 4 port serial card based on the Oxford OX16PCI954 is
clocked at 10x normal speed. That is, when you set it for 9600
baud, it actually does 96000 baud. In order to make it plug and
play with other serial ports, it has to have its clock rate
reduced by a factor of 10.

Discussed with: Marcel Moolenaar
MFC after:	2 weeks
2008-05-29 07:15:52 +00:00
Marcel Moolenaar
c1163871f6 Fix RID calculation. The RID is really the BAR for PCI cards,
so the index needs to be translated into an offset. While we
did add the offset (0x10), we forgot to account for the width.

Tested by: Thomas Vogt
MFC after: 3 days
2008-05-16 14:57:48 +00:00
Maxim Konovalov
f6a60feb6c o Add Moxa Technologies CP-104EL PCI Express 4 port Serial card.
PR:		kern/119515
Submitted by:	Gavin Stone-Tolcher
MFC after:	1 month
2008-01-12 19:14:29 +00:00
Dag-Erling Smørgrav
5efb0f8d7a Rewrite puc_pci_match() to handle non-trivial cases correctly.
MFC after:	1 week
2007-10-13 12:14:20 +00:00
Peter Wemm
e704d0ebe7 Calculate the correct PCI BAR for the Timedia based serial cards. The
Linux equivalent gives BAR offsets relative to the implied base of 0x10.
Our PUC_CFG_GET_RID functions have to add the base offset themselves.
2007-06-07 06:28:48 +00:00
Paolo Pisati
8d715a3523 -axe p_ih from struct puc_port cause it was useless
-correctly check for filter only handler

Reviewed by: marcel
Tested by: marcel
2007-06-06 22:17:01 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marcel Moolenaar
1d860a7ee5 Add SIIG 4 port serial card based on the Oxford OX16PCI954. 2006-09-04 18:27:14 +00:00
David E. O'Brien
482aa6a357 Fix building with GCC 4.2: ensure types are defined before refering to them. 2006-06-29 16:27:19 +00:00
Warner Losh
ed0b0e826e Need machine/bus.h here too 2006-06-12 19:22:44 +00:00
Marcel Moolenaar
64220a7e28 Rewrite of puc(4). Significant changes are:
o  Properly use rman(9) to manage resources. This eliminates the
   need to puc-specific hacks to rman. It also allows devinfo(8)
   to be used to find out the specific assignment of resources to
   serial/parallel ports.
o  Compress the PCI device "database" by optimizing for the common
   case and to use a procedural interface to handle the exceptions.
   The procedural interface also generalizes the need to setup the
   hardware (program chipsets, program clock frequencies).
o  Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
   default and non-serdev devices are handled by the bus.
o  Use the serdev I/F to collect interrupt status and to handle
   interrupts across ports in priority order.
o  Sync the PCI device configuration to include devices found in
   NetBSD and not yet merged to FreeBSD.
o  Add support for Quatech 2, 4 and 8 port UARTs.
o  Add support for a couple dozen Timedia serial cards as found
   in Linux.
2006-04-28 21:21:53 +00:00
Marcel Moolenaar
90730ac6d0 When we attach to either a SAB82532 or a Z8530, print a notice
saying that scc(4) should be configured into the kernel. This
helps people to migrate away from puc(4) for these devices.
2006-03-30 18:43:03 +00:00
Marcel Moolenaar
c9ccf50a36 MFp4:
Return BUS_PROBE_LOW_PRIORITY for a successful probe. This is in
preparation of the introduction of scc(4), which is going to handle
SCCs in the near future.
2006-02-24 02:06:57 +00:00
John Baldwin
3df4e47b1e Use bus_setup_intr() rather than invoking BUS_SETUP_INTR() directly so that
puc still prints out [FAST] on Peter's box.
2006-02-22 17:19:10 +00:00
Warner Losh
c46a4f9afd Careful measurement of the ST Labs card shows that the pulse width of
transmitted bits was between 8.6180us and 8.6200us when we used a RCLK
of 16.500MHz.  This is a little low (should be 8.6805us).  This error
is exactly the error one would expect if it actually had a 16.384MHz
watch oscillator (as suggested by garrett) instead of using the PCI
RCLK.  Assume that the pci clock therefore wasn't really used, but
instead the cheap 16.384MH watch quartz oscillator.  This gives bits
in the 8.6800us to 8.6810us ranage, which matches theoretical.

Submitted by: garrett
2005-12-08 22:29:42 +00:00
Warner Losh
7640c87195 The Oxford 16C950 based CardBus Serial device that I was given some
time ago appears to be based not on the typical 1.8432MHz clock, or
the other more typical multiple of 8 of this (14.7456MHz), but instead
it appears to be 1/2 the PCI clock rate or 16.50000MHz.  I'm not 100%
sure that this is right, but since I did the original entry, I'm going
to go ahead and modify it.  With the 14.7456MHz value, I was getting
bits that were ~7.3us instead of ~8.6us like they are supposed to be.

My measuring gear for today is a stupid handheld scope with two
signficant digits.  So I don't know if it is 33.000000/2 MHz or some
other value close to 16.5MHz, but 16.5MHz works well enough for me to
use a couple of different devices at 115200 baud, and is a nice even
multiple of a well known clock frequency...
2005-12-05 23:30:28 +00:00
John Baldwin
7417e80b4e Don't enable PUC_FASTINTR by default in the source. Instead, enable it
via the DEFAULTS kernel configs.  This allows folks to turn it that option
off in the kernel configs if desired without having to hack the source.
This is especially useful since PUC_FASTINTR hangs the kernel boot on my
ultra60 which has two uart(4) devices hung off of a puc(4) device.

I did not enable PUC_FASTINTR by default on powerpc since powerpc does not
currently allow sharing of INTR_FAST with non-INTR_FAST like the other
archs.
2005-11-21 20:22:35 +00:00
Craig Rodrigues
4a1f4e2a13 Eliminate tinderbox errors. 2005-11-07 13:10:45 +00:00
Poul-Henning Kamp
5eb2dd9421 Avoid trouble with PUC_FASTINTR if it is already defined. 2005-11-06 15:55:45 +00:00
Poul-Henning Kamp
42afc093d2 Now that fast interrupts can be shared we can use them in puc. 2005-11-05 21:04:53 +00:00
Poul-Henning Kamp
46dd877ddc Add yet another entry to the list. 2005-11-05 21:04:26 +00:00
Poul-Henning Kamp
64fd97df54 puc(4) does strange things to resources in order to fool the
subdrivers to hook up.

It should probably be rewritten to implement a simple bus to which
the sub drivers attach using some kind of hint.

Until then, provide a couple of crutch functions with big warning
signs so it can survive the recent changes to struct resource.
2005-09-28 18:06:25 +00:00
Poul-Henning Kamp
11480c10de __RMAN_RESOURCE_VISIBLE not needed. 2005-09-25 20:21:14 +00:00
Marius Strobl
079f9edfef Recognize the SAB82532 in USIII machines. 2005-08-07 13:37:25 +00:00
Marius Strobl
fcff691970 Account for ebus(4) defaulting to SYS_RES_MEMORY for memory resources
since ebus.c rev. 1.22.
2005-06-04 20:29:28 +00:00
Warner Losh
8343165363 Sort Oxford Semi entires. Add entry for OXCB950, a PCI/CardBus
16C950.  Adding it here doesn't unlock any of the cool 16C950 features
(like the 128 byte fifo, the different prescalor, etc), but it does
seem to get it working for me in light testing.

Card Provided by: Ihsan Dogan
2005-04-22 07:49:35 +00:00
Warner Losh
6b9907e7f8 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:10:49 +00:00
Marius Strobl
c90ff9ce5a - sparc64/fhc/fhc.c:
Change fhc(4) to use IRQ numbers instead of RIDs for allocating the
  IRQs of children. This works similar to e.g. sbus(4), i.e. add the
  IRQ resources as fully specified to the resource lists of the children,
  allocate them like normal. When establishing the interrupt search the
  interrupt maps of the children for a matching INO to determine which
  map we need to write the fully specified interrupt number to and to
  enable the mapping (before the RID was used to indicate which interrupt
  map to use).

- dev/puc/puc.c:
  Revert rev. 1.38, with the above change fhc(4) no longer needs special
  treatment for allocating IRQs.

Thanks to:	joerg for providing access to an E3500
2005-03-04 22:23:21 +00:00
Marius Strobl
099894cc96 Declare the sbus(4) front-end of puc(4) also for fhc(4), allowing
uart(4) to support the Zilog 8530 SCCs which hang off of a FireHose
bus on Sun E4000/E5000 class machines.
Beside the fact that a puc_fhc.c would just be a copy of puc_sbus.c
with s,sbus,fhc,g the reason why the declaration for fhc(4) was
sticked into puc_sbus.c is that both of these front-ends for puc(4)
will go away once there is a scc(4).

Discussed with:	marcel
Tested by:	hrs, kris
MFC after:	3 days
2005-02-26 00:25:43 +00:00
Marius Strobl
ad11db7c28 Add a stopgap allowing puc(4) to allocate IRQs on fhc(4). Given that
both a scc(4) is under way and fhc(4) will be change to use INOs this
shouldn't stay in HEAD for too long but we need a MFC-able solution
for FreeBSD 5.4.

Discussed with:	marcel
Tested by:	hrs, kris
MFC after:	3 days
2005-02-26 00:22:52 +00:00
Marius Strobl
e1e33cb261 Remove duplicate FBSDID. 2005-02-26 00:21:25 +00:00
Sam Leffler
f111c2680b fail gracefully rather than using an invalid array index if unable
to allocate a bar; it's unclear whether this can happen in practice

Noticed by:	Coverity Prevent analysis tool
Discussed with:	marcel
2005-02-25 19:47:18 +00:00
Wilko Bulte
1217303f75 add support for NetMos NM9805 1284 Printer port
Submitted by: Willy Offermans <W.K.Offermans@TUe.nl>

MFC after: 2 weeks
2005-02-09 18:38:28 +00:00
Marcel Moolenaar
2554d6b9b4 Revert rev. 1.5.
It should be safe to attach to all Z8530 controllers again. In fact,
the keyboard works on Ultra 2 machines.

MFC after: 5 days
2005-01-31 04:25:48 +00:00
Bruce M Simpson
3e19d3c0f0 Add PCI ID for Dell RAC IV/ERA Virtual UART (PowerEdge 1850).
Trim name of existing Dell RAC devices. Trim comments.

With help from:	dpk at dpk dot net
MFC after:	1 week
2005-01-27 01:17:32 +00:00
Bruce M Simpson
0502030614 Add device description for the Dell Remote Access Card (DRAC) III and IV
virtual COM port. This makes the use of the Dell OpenManage tools on FreeBSD
considerably easier, and is based on Chuck Cranor's original patch for 4.6.

Reviewed by:	imp
Tested by:	dpk at dpk dot net
MFC after:	1 week
2005-01-20 15:40:50 +00:00
Warner Losh
774363d3cf Revert part of last commit that was unintentional 2005-01-11 07:18:17 +00:00
Warner Losh
ac673f9a82 Use the standard FreeBSD license 2005-01-11 06:24:40 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Wilko Bulte
cc1d7d872e Add support for Chase/Perle PCI FAST-4 4 port serial cards which appear
to be the same as Boca Research Turbo Serial 654 (4 serial port).
While add the 8 port variants as well.

Submitted by: sten@blinkenlights.nl
PR: kern/75793
MFC after: 1 week
2005-01-05 20:06:04 +00:00