The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Use the new IfAPI interface and address iterators so the nfs driver
doesn't need direct access to the interface structures.
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38962
This was originally allowed by 3cea29603d (2011). But it got broken by
693957f886 (2016) and apparently nobody noticed.
MFC after: 1 week
Sponsored by: Axcient
Reviewed by: rmacklem, ken
Differential Revision: https://reviews.freebsd.org/D37589
If "vfs.root.mountfrom" is set and the value is something other
than "nfs:*", it means the user doesn't want to mount root via nfs,
there's no reason to continue with bootpc
This fixes the powerpcspe kernel (MPC85XXSPE) that's compiled with
BOOTP_NFSROOT by default and gets stuck on bootpc/dhcp request loop
when no DHCP server is available on the network, even when user
specifies a local disk via "vfs.root.mountfrom" kernel parameter.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D35098
Replaces panic with a warning message to allow kernel continue
when no bootp eligible network interfaces are found.
This avoids having to build a custom kernel when using a local root
file system on targets like powerpcspe that expects bootp/NFS by
default.
Reviewed by: rmacklem
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D34567
In NFSv2, the directory cookie was 32-bits. NFSv3 widened it to
64-bits and SVN r22521 widened the corresponding argument in
VOP_READDIR, but FreeBSD's NFS server continued to treat the cookies as
32-bits, and 0-extended to fill the field on the wire. Nobody ever
noticed, because every in-tree file system generates cookies that fit
comfortably within 32-bits.
Also, have better type safety for txdr_hyper. Turn it into an inline
function that type-checks its arguments. Prevents warnings about
shift-count-overflow.
PR: 260375
MFC after: 2 weeks
Reviewed by: rmacklem
Differential Revision: https://reviews.freebsd.org/D33404
When no mask is supplied to the ioctl adding an Internet interface
address, revert to using the historical class mask rather than a
single default. Similarly for the NFS bootp code.
MFC after: 3 weeks
Reviewed by: melifaro glebius
Differential Revision: https://reviews.freebsd.org/D32951
Hide historical Class A/B/C macros unless IN_HISTORICAL_NETS is defined;
define it for user level. Define IN_MULTICAST separately from IN_CLASSD,
and use it in pf instead of IN_CLASSD. Stop using class for setting
default masks when not specified; instead, define new default mask
(24 bits). Warn when an Internet address is set without a mask.
MFC after: 1 month
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D32708
When loading a direct-boot kernel, a temporary route is being installed,
the NFS handle is acquired, and the temporary route is removed again.
This was being done inside a net epoch, but since the krpc code is written
using blocking APIs, we can't actually do that, because sleeping is not
allowed during a net epoch.
Exit and reenter the epoch so we are only in the epoch when doing the
routing table manipulation.
Fixes panic when booting my RB800 over NFS (where the kernel is loaded
using RouterBOOT directly.)
Reviewed by: melifaro
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D29464
These files are no longer used by the FreeBSD base system. They were being used by the amd port but that has also been deleted.
Reviewed by: rmacklem
Sponsored by: Google
Differential Revision: https://reviews.freebsd.org/D29180
Remove all variations of rtrequest <rtrequest1_fib, rtrequest_fib,
in6_rtrequest, rtrequest_fib> and their uses and switch to
to rib_action(). This is part of the new routing KPI.
Submitted by: Neel Chauhan <neel AT neelc DOT org>
Differential Revision: https://reviews.freebsd.org/D25546
Currently the only reason of refcounting rtentries is the need to report
the rtable operation details immediately after the execution.
Delaying rtentry reclamation allows to stop refcounting and simplify the code.
Additionally, this change allows to reimplement rib_lookup_info(), which
is used by some of the customers to get the matching prefix along
with nexthops, in more efficient way.
The change keeps per-vnet rtzone uma zone. It adds nh_vnet field to
nhop_priv to be able to reliably set curvnet even during vnet teardown.
Rest of the reference counting code will be removed in the D24867 .
Differential Revision: https://reviews.freebsd.org/D24866
This debugging code printing routing table data was introduced in rS25723,
22+ years ago. The last functional commit to this code was rS67534, 19 years ago.
The code has been turned off by default all this time.
Lastly, this code directly iterates radix tree and rtentries, which is not
not a proper interaction with routing system.
Differential Revision: https://reviews.freebsd.org/D24554
The file handle affinity code was configured to be used by both the
old and new NFS servers. This no longer makes sense, since there is
only one NFS server.
This patch copies a majority of the code in sys/nfs/nfs_fha.c and
sys/nfs/nfs_fha.h into sys/fs/nfsserver/nfs_fha_new.c and
sys/fs/nfsserver/nfs_fha_new.h, so that the files in sys/nfs can be
deleted. The code is simplified by deleting the function callback pointers
used to call functions in either the old or new NFS server and they were
replaced by calls to the functions.
As well as a cleanup, this re-organization simplifies the changes
required for handling of external page mbufs, which is required for KERN_TLS.
This patch should not result in a semantic change to file handle affinity.
This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
The code in sys/nfs/nfs_lock.c has not been run by default since March 2008
when it was replaced by the in kernel sys/nlm code.
It uses Giant, so it needs to be removed before the FreeBSD 13 release.
This will happen in a couple of months, since few if any users run
the code anyhow and can easily switch to the default in kernel NFSLOCKD.
Using of rwlock with multiqueue NICs for IP forwarding on high pps
produces high lock contention and inefficient. Rmlock fits better for
such workloads.
Reviewed by: melifaro, olivier
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15789
This code merge adds a pNFS service to the NFSv4.1 server. Although it is
a large commit it should not affect behaviour for a non-pNFS NFS server.
Some documentation on how this works can be found at:
http://people.freebsd.org/~rmacklem/pnfs-planb-setup.txt
and will hopefully be turned into a proper document soon.
This is a merge of the kernel code. Userland and man page changes will
come soon, once the dust settles on this merge.
It has passed a "make universe", so I hope it will not cause build problems.
It also adds NFSv4.1 server support for the "current stateid".
Here is a brief overview of the pNFS service:
A pNFS service separates the Read/Write oeprations from all the other NFSv4.1
Metadata operations. It is hoped that this separation allows a pNFS service
to be configured that exceeds the limits of a single NFS server for either
storage capacity and/or I/O bandwidth.
It is possible to configure mirroring within the data servers (DSs) so that
the data storage file for an MDS file will be mirrored on two or more of
the DSs.
When this is used, failure of a DS will not stop the pNFS service and a
failed DS can be recovered once repaired while the pNFS service continues
to operate. Although two way mirroring would be the norm, it is possible
to set a mirroring level of up to four or the number of DSs, whichever is
less.
The Metadata server will always be a single point of failure,
just as a single NFS server is.
A Plan B pNFS service consists of a single MetaData Server (MDS) and K
Data Servers (DS), all of which are recent FreeBSD systems.
Clients will mount the MDS as they would a single NFS server.
When files are created, the MDS creates a file tree identical to what a
single NFS server creates, except that all the regular (VREG) files will
be empty. As such, if you look at the exported tree on the MDS directly
on the MDS server (not via an NFS mount), the files will all be of size 0.
Each of these files will also have two extended attributes in the system
attribute name space:
pnfsd.dsfile - This extended attrbute stores the information that
the MDS needs to find the data storage file(s) on DS(s) for this file.
pnfsd.dsattr - This extended attribute stores the Size, AccessTime, ModifyTime
and Change attributes for the file, so that the MDS doesn't need to
acquire the attributes from the DS for every Getattr operation.
For each regular (VREG) file, the MDS creates a data storage file on one
(or more if mirroring is enabled) of the DSs in one of the "dsNN"
subdirectories. The name of this file is the file handle
of the file on the MDS in hexadecimal so that the name is unique.
The DSs use subdirectories named "ds0" to "dsN" so that no one directory
gets too large. The value of "N" is set via the sysctl vfs.nfsd.dsdirsize
on the MDS, with the default being 20.
For production servers that will store a lot of files, this value should
probably be much larger.
It can be increased when the "nfsd" daemon is not running on the MDS,
once the "dsK" directories are created.
For pNFS aware NFSv4.1 clients, the FreeBSD server will return two pieces
of information to the client that allows it to do I/O directly to the DS.
DeviceInfo - This is relatively static information that defines what a DS
is. The critical bits of information returned by the FreeBSD
server is the IP address of the DS and, for the Flexible
File layout, that NFSv4.1 is to be used and that it is
"tightly coupled".
There is a "deviceid" which identifies the DeviceInfo.
Layout - This is per file and can be recalled by the server when it
is no longer valid. For the FreeBSD server, there is support
for two types of layout, call File and Flexible File layout.
Both allow the client to do I/O on the DS via NFSv4.1 I/O
operations. The Flexible File layout is a more recent variant
that allows specification of mirrors, where the client is
expected to do writes to all mirrors to maintain them in a
consistent state. The Flexible File layout also allows the
client to report I/O errors for a DS back to the MDS.
The Flexible File layout supports two variants referred to as
"tightly coupled" vs "loosely coupled". The FreeBSD server always
uses the "tightly coupled" variant where the client uses the
same credentials to do I/O on the DS as it would on the MDS.
For the "loosely coupled" variant, the layout specifies a
synthetic user/group that the client uses to do I/O on the DS.
The FreeBSD server does not do striping and always returns
layouts for the entire file. The critical information in a layout
is Read vs Read/Writea and DeviceID(s) that identify which
DS(s) the data is stored on.
At this time, the MDS generates File Layout layouts to NFSv4.1 clients
that know how to do pNFS for the non-mirrored DS case unless the sysctl
vfs.nfsd.default_flexfile is set non-zero, in which case Flexible File
layouts are generated.
The mirrored DS configuration always generates Flexible File layouts.
For NFS clients that do not support NFSv4.1 pNFS, all I/O operations
are done against the MDS which acts as a proxy for the appropriate DS(s).
When the MDS receives an I/O RPC, it will do the RPC on the DS as a proxy.
If the DS is on the same machine, the MDS/DS will do the RPC on the DS as
a proxy and so on, until the machine runs out of some resource, such as
session slots or mbufs.
As such, DSs must be separate systems from the MDS.
Tested by: james.rose@framestore.com
Relnotes: yes
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
Use syscall_helper_register() to register syscalls and do it through the
module interface rather than sysinit.
This pattern is more common and easier to understand.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14232
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
This change adds two new tunables, allowing to control serialization for
read and write NFS requests separately. It does not change the default
behavior since there are too many factors to consider, but gives additional
space for further experiments and tuning.
The main motivation for this change is very low write speed in case of ZFS
with sync=always or when NFS clients requests sychronous operation, when
every separate request has to be written/flushed to ZIL, and requests are
processed one at a time. Setting vfs.nfsd.fha.write=0 in that case allows
to increase ZIL throughput by several times by coalescing writes and cache
flushes. There is a worry that doing it may increase data fragmentation
on disks, but I suppose it should not happen for pool with SLOG.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
When an NFS mount is hung against an unresponsive NFS server, the "umount -f"
option can be used to dismount the mount. Unfortunately, "umount -f" gets
hung as well if a "umount" without "-f" has already been done. Usually,
this is because of a vnode lock being held by the "umount" for the mounted-on
vnode.
This patch adds kernel code so that a new "-N" option can be added to "umount",
allowing it to avoid getting hung for this case.
It adds two flags. One indicates that a forced dismount is about to happen
and the other is used, along with setting mnt_data == NULL, to handshake
with the nfs_unmount() VFS call.
It includes a slight change to the interface used between the client and
common NFS modules, so I bumped __FreeBSD_version to ensure both modules are
rebuilt.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11735
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
and getboottimebin(9) KPI. Change consumers of boottime to use the
KPI. The variables were renamed to avoid shadowing issues with local
variables of the same name.
Issue is that boottime* should be adjusted from tc_windup(), which
requires them to be members of the timehands structure. As a
preparation, this commit only introduces the interface.
Some uses of boottime were found doubtful, e.g. NLM uses boottime to
identify the system boot instance. Arguably the identity should not
change on the leap second adjustment, but the commit is about the
timekeeping code and the consumers were kept bug-to-bug compatible.
Tested by: pho (as part of the bigger patch)
Reviewed by: jhb (same)
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
only the first one will actually work and all the others just result in
errors (which would get printed but otherwise ignored).
Instead, wait until we make a choice of which interface will be used to
mount the rootfs, and install the default route associated with it (if any).
After doing the md_mount() call to obtain the needed info, remove the
default route again, and transcribe the route info into the nfs_diskless
structure. If the system eventually chooses to mount the nfs rootfs, the
default route will be installed again when the nfs_diskless code
re-initializes the interface.
The theory here is that since we can only have one default route, the one
most likely to be correct for mounting the rootfs is the one that was
delivered along with the rootpath option.
bootp/dhcp server doesn't provide a router option. Doing so prevents
setting defaultrouter=<ip> in rc.conf (it fails because there's already
a bogus default route installed by bootpc_init).
When an admin wants to use this style of proxy arp on an interface, the
proper mechanism is to set the "use-lease-addr-for-default-route" flag
in the dhcp server config. That causes the lease address to be delivered
in the routers option, and the normal handling of the routers option will
then install the self-ip as the default route.
PR: 187094
doesn't check for errors, and all the errors that can happen result in it
calling panic anyway, except for one that's really more of a warning (and
is going to disappear on an upcoming commit anyway).
server (and not when it came from a fallback method such as the ROOTDEVNAME
option). This makes the code in bootpc_init() choose the first interface
that provided a rootpath name. Previously it was choosing the first
interface that got an IP address, which could be on a different and
potentially unreachable subnet than the server providing the rootfs.
If the rootpath name actually does come from a fallback source, then the
code continues to use the first interface in the list that got configured.
Note that this wasn't directly reported in the PR cited below, but was
discovered while working on that PR.
PR: 187094
set that mtu on the interface.
These changes are based on the patch submitted by Robert Blayzor in the
PR, but I changed things around a bit, so the blame for any mistakes
belongs to me.
PR: 187094
There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.
So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.
Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).
New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.
option that will be added to the nfsuserd daemon in a future
commit. It modifies the cache used by NFSv4 for name<-->id
translation (both username/uid and group/gid) to support this.
When "-manage-gids" is set, the server looks up each uid
for the RPC and uses the list of groups cached in the server
instead of the list of groups provided in the RPC request.
The cached group list is acquired for the cache by the nfsuserd
daemon via getgrouplist(3).
This avoids the 16 groups limit for the list in the RPC request.
Since the cache is now used for every RPC when "-manage-gids"
is enabled, the code also modifies the cache to use a separate
mutex for each hash list instead of a single global mutex.
Suggested by: jpaetzel
Tested by: jpaetzel
MFC after: 2 weeks
which means that the NFSCLIENT and NFSSERVER
kernel options will no longer work. This commit
only removes the kernel components. Removal of
unused code in the user utilities will be done
later. This commit does not include an addition
to UPDATING, but that will be committed in a
few minutes.
Discussed on: freebsd-fs
