Commit Graph

232 Commits

Author SHA1 Message Date
Matt Jacob
49c36ff4f3 fix it so it compiles on alpha again 1999-05-07 17:52:01 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Kirk McKusick
e244fe31d6 Generalize to allow any serial port to be used as the GDB port.
Mark the GDB port in the config file with flags 0x80. Currently
only the sio driver checks these flags and sets up a GDB port,
but adding similar code to other serial drivers would be easy.
For backward compatibility, if an sio port is marked as the console
and no port is marked as the gdb port, the GDB port will be mapped
to the console port. This hack should go away at some point.
1999-05-07 06:50:41 +00:00
Peter Wemm
d5558c001a Fix up a few easy 'assignment used as truth value' and 'suggest parens
around && within ||' type warnings.  I'm pretty sure I have not masked
any problems here, I've committed real problem fixes seperately.
1999-05-06 18:44:42 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Dmitrij Tejblum
b079102dc5 Modify the non-i386 version of disable_intr() and enable_intr() so that they
don't produce a warning on every use.
1999-04-24 10:41:21 +00:00
Peter Wemm
0dd2ac5462 Tidy up a few things left over from the conversion from i386/isa/sio.c.
Leave two #if 0'd notes about the way things used to be done for reference.
1999-04-18 14:35:28 +00:00
Doug Rabson
e2117e478b Register sio interrupts as fast (fixing some silo overflow messages). 1999-04-18 14:11:01 +00:00
Peter Wemm
007e69315a Merge up to rev 1.234 (nice revision number!) of i386/isa/sio.c. 1999-04-17 01:02:27 +00:00
Peter Wemm
c976cd3849 Merge up to rev 1.226 of i386/isa/sio.c 1999-04-17 00:37:01 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Poul-Henning Kamp
4e2d2aa1cd Use suser() to check for super user rather than examining cr_uid directly.
Use TTYDEF_SPEED rather than 9600 a couple of places.

Reviewed by:	bde, with a few grumbles.
1999-01-30 12:17:38 +00:00
Peter Wemm
d17e4ee67d Update the pccard hooks to use a module style declaration instead. 1999-01-19 00:21:53 +00:00
Steve Price
921543cf2f Add support for another 3COM/USR PNP modem, USR3031. 1998-12-13 23:12:54 +00:00
Doug Rabson
08b6a4cbee * Add hooks to allow the X server to access I/O ports and memory.
* Update drivers to the latest version of the bus interface.

The ISA drivers' use of the new resource api is minimal.  Garrett has
some much cleaner drivers which should be more easily shared between
i386 and alpha.  This has only been tested on cia based machines.  It
should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
Doug Rabson
6f19d636a6 Merge changes from i386/isa/sio.c up to revision 1.215. 1998-09-26 14:47:16 +00:00
Peter Wemm
d4a2828cde Underlying ,v files were copied and detagged. Re-commit old versions
onto the head revision.  (mainly using sys/bus.h etc for alpha)
1998-09-26 14:00:29 +00:00
Eivind Eklund
dfef928b1c Support PnP compatibility IDs. This allow e.g. the ed driver to pick
up any PnP NE2000 compatible card, instead of forcing us to always
update ID lists.

Submitted by:	Ugo Paternostro <paterno@dsi.unifi.it>
1998-09-13 22:15:44 +00:00
Bruce Evans
1fcee46997 Fixed printf format errors. 1998-08-23 10:16:26 +00:00
Bruce Evans
cf8c7b0963 Added D_TTY to the cdevswitch flags for all tty drivers. This is required
for the Lite2 fix for always returning EIO in dead_read().

Cleaned up the cdevswitch initializers for all tty drivers.

Removed explicit calls to ttsetwater() from all (tty) drivers.  ttsetwater()
is now called centrally for opens, not just for parameter changes.
1998-08-23 08:26:42 +00:00
Bruce Evans
9a02ad618f Fixed devfs initialization which I broke in the previous commit. 1998-08-20 05:12:48 +00:00
Bruce Evans
3fd2d29816 Enabled dynamically sized tty input buffers (with enough buffering
for 1 second's worth of input) and larger tty output buffers.  The
interrupt-level buffers are still too small for speeds above 115200
bps (only a little too small for 230400 bps if RTS flow control is
enabled).

Don't call ttsetwater() explicitly in open().  It is now called for
the TTYDISC l_open() and should be static.

Don't attempt to register the cdevsw more than once.
1998-08-19 04:17:38 +00:00
Bruce Evans
92971f1fd7 Register tty software interrupt handlers at run time using register_swi()
instead of at compile time using ifdefs.

Use _swi_null instead of dummycamisr.  CAM and dpt should call
register_swi() instead of hacking on ihandlers[] directly.
1998-08-11 17:01:32 +00:00
Bruce Evans
18da528d41 Changed %n to %r in devfs name format strings. %n has almost gone away. 1998-07-15 12:18:34 +00:00
Poul-Henning Kamp
e29bc9add4 Avoid some panics in sio_unload which gets called with various dirt
if the attach of a modem card failed.
1998-06-24 09:23:32 +00:00
Bruce Evans
eca52014bd Don't log "unexpected" events on never-opened devices. Events left
over from the probe are now expected for incompatible UARTs that
deliver IRQs as a strobe (low) instead of a level (high).

Discard events on going-away devices too.  Endless loops may have
been possible when an active pccard was removed.
1998-06-16 11:05:59 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Bruce Evans
12e1ed28e2 Force success of the probe (after doing it as before except in one
miscconfigured case) if the port is the console.  This fixes several
bugs:
- if all sioprobe()s failed, then the console driver followed null
  pointers in cdevsw[].
- if the sioprobe() for the console failed but another sioprobe()
  succeeded, then init hung early when the console couldn't be
  opened.
- it was silly for the console to not be there after printing boot
  messages on it.
Bugs introduced by this are hopefully no worse than old ones caused
by forcing the success of the `cn' level probe.
1998-06-03 12:30:10 +00:00
Bruce Evans
b76bb1d472 Fixed a printf() arg botch in the previous commit.
Only complain about an irq mismatch in the probe if the configured
irq doesn't become active, and then print the bitmap of irqs that
became active (including clock irqs) instead of just the first
(not including clock irqs).

Bugs reported by: msmith
1998-06-03 09:43:38 +00:00
Bruce Evans
cd55b8f46c Converted the ICU-level interrupt tests (3, 5 and 8) in sioprobe() into
a test of the irq number, and made failure of this test non-fatal.
Removed related unused complications for the APIC_IO case.  Removed the
no-test3 flag.

Deverbosified the failure messages for the other tests.  Removed the
per-port verbose flag - just use the general verbose flag.
1998-05-31 10:53:55 +00:00
Poul-Henning Kamp
d53fd54d9f LoadSoftModem() routine at sio.c does not trap general serial I/Os.
It fauls to probe eather DSI Modem or others.

PR:		4657
Reviewed by:	phk
Submitted by:	Kenji Saito <marukun@mx2.nisiq.net>
1998-05-20 06:46:58 +00:00
Poul-Henning Kamp
bdb8446393 The PnP code in 2.2.6 detects the Motorola ModemSurfer 56K,
but doesn't do much of anything with it.  I added it to siopnp_ids[]
and it was found and recognized as a serial port.

PR:		6605
Reviewed by:	phk
Submitted by:	Dave Marquardt <marquard@zilker.net>
1998-05-13 07:26:55 +00:00
Poul-Henning Kamp
b4362367e0 Detect USR PnP x2 modem.
PR:		6496
Reviewed by:	phk
Submitted by:	Kurt D. Zeilenga <Kurt@Boolean.NET>
1998-05-04 10:35:13 +00:00
Mike Smith
47959c89b9 PCCARD-code related style nits, as requested.
Submitted by:	bde
1998-02-27 06:39:32 +00:00
Mike Smith
9a70f9f75f Fix some style nits and remove an unused header.
Submitted by:	bde
1998-02-27 05:38:32 +00:00
Nate Williams
a021db1639 - If a PCCARD serial device is removed from the system, let the serial
driver 'break out' of the infinite loop waiting for a response from
  it.  This is a bad thing, but no worse than having the kernel hang.
1998-02-14 16:17:17 +00:00
Poul-Henning Kamp
a4daaa09f2 Implement the spirit but not the letter of Terrys hot-char patch.
The differences Terrys patch and this patch are:
 * Remove a lot of un-needed comments.
 * Don't put l_hotchar at the front of stuct linesw, there is no need to.
 * Use the #defines for the hotchar in the SLIP and PPP line disciplines
1998-02-13 12:46:28 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Atsushi Murai
844451dc95 1. Supporting a bogus 16550A compatible PCMCIA CARD stuffs
- IIR_TXRDY is never off even if reading a IIR register.
    - Know as PIAFS "Palido 321S", "DC-*S" oemed by Sharp corp.

 2. Omiting a restrict probing if it's already probed by pccardd.
    Note: Define a new id_flags as follows

           0x40000 - NO PROBE (Already probed as serial)
           0x80000 - Has a bogus IIR_TXRDY register

	Sato Junichi <junichi@astec.co.jp>
	Nrihiro Kumagai <kuma@slab.tnr.sharp.co.jp>
	Hirao Tetsuya <ai.cs.fujitsu.co.jp>
	Toshiharu Asai <asai@mbc.infoshere.or.jp>
	Shin'ya Kumabuchi <kumabu@t3.rim.or.jp>
        Freebsd-users-jp@jp.freebsd.org
	bsd-nomads@ai.cs.fujitsu.co.jp
1998-01-08 04:53:43 +00:00
Bruce Evans
88754aaf0e Fixed initialization of the divisor latch. We depended on siocnopen()
initializing it for the (usual) (siocniobase != 0) case, but
siocnopen() doesn't initialize it if the latch registers already
have the correct values.
1997-12-28 06:36:35 +00:00
Bruce Evans
e932603093 Always call ttwwakeup() before returning from comstart(). It isn't
necessary to call it when the tty layer's output state has not been
changed, but siostop() sometimes changes the TS_BUSY state and then
calls comstart() mainly for its side effect of calling ttwwakeup().
1997-12-28 06:20:47 +00:00
Eivind Eklund
5591b823d1 Make COMPAT_43 and COMPAT_SUNOS new-style options. 1997-12-16 17:40:42 +00:00
Bruce Evans
239b7b699e Use ENOIOCTL instead of -1 (= ERESTART) for tty ioctls that are
not handled at a particular level.  This fixes mainly restarting
of interrupted TIOCDRAINs and TIOCSETA{W,F}s.
1997-12-06 13:25:01 +00:00
Nate Williams
133c8c2f49 - Renamed <pccard/card.h> -> <pccard/cardinfo.h>.
Forgotten by:		me
Reminded by:		Bruce
1997-11-20 15:48:41 +00:00
Nate Williams
241fe562b4 - MF22: (I reversed these). Simplify code. 1997-11-02 21:26:14 +00:00
Nate Williams
075a76a29e - Instead of relying on a functional call to register PCARD-capable drivers,
use a Linker Set.  Note, if a driver is loaded as an LKM  if will have
  to use the function call, but since none of the existing drivers
  are loadable, this made things cleaner and boot messages nicer.

Obtained from:	PAO-970616
1997-10-26 21:08:42 +00:00
Nate Williams
8bb7a8fc95 - Functional changes to PCCARD support.
* Kill individual drivers 'suspend' routines, since there's no simple/safe
   way to suspend/resume a card w/out going through the complete probe
   at initialization time.
 * Default to using the apm_pccard_resume sysctl code, which basically
   pretends the card was removed, and then re-inserted.  Suspend/resume
   is now 'emulated' with a fake insert/removal.  (Hence we no longer
   need the driver-specific suspend routines.)
1997-10-26 04:54:16 +00:00
Nate Williams
e7e437dbfa - Do a bunch of gratuitous changes intended to make the code easier to
follow.
 * Rename/reorder all of the pccard structures, change many of the member
   names to be descriptive, and follow more closely other 'bus' drivers
   naming schemes.
 * Rename a bunch of parameter and local variable names to be more
   consistant in the code.
 * Renamed the PCCARD 'crd' device to be the 'card' device
 * KNF and make the code consistant where it was obvious.
 * ifdef'd out some unused code
1997-10-26 04:36:24 +00:00
Poul-Henning Kamp
a1c995b626 Last major round (Unless Bruce thinks of somthing :-) of malloc changes.
Distribute all but the most fundamental malloc types.  This time I also
remembered the trick to making things static:  Put "static" in front of
them.

A couple of finer points by:	bde
1997-10-12 20:26:33 +00:00
Justin T. Gibbs
02a199102d aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

	Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

	Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00