Commit Graph

19 Commits

Author SHA1 Message Date
Enji Cooper
193d9e768b sys/modules: normalize .CURDIR-relative paths to SRCTOP
This simplifies make output/logic

Tested with:	`cd sys/modules; make ALL_MODULES=` on amd64
MFC after:	1 month
Sponsored by:	Dell EMC Isilon
2017-03-04 10:10:17 +00:00
Konstantin Belousov
3846a82284 Remove zero-copy sockets code. It only worked for anonymous memory,
and the equivalent functionality is now provided by sendfile(2) over
posix shared memory filedescriptor.

Remove the cow member of struct vm_page, and rearrange the remaining
members.  While there, make hold_count unsigned.

Requested and reviewed by:	alc
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
Approved by:	re (delphij)
2013-09-16 06:25:54 +00:00
Scott Long
73c8420784 The if_ti Tigon I/II driver has moved to /sys/dev/ti 2005-12-10 00:38:33 +00:00
Max Laier
b6de9e91bd Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.

Discussed on:	-arch
Reviewed by:	thompsa
X-MFC-after:	never (RELENG_6 as transition period)
2005-09-27 18:10:43 +00:00
David E. O'Brien
1ab9fa6c26 Remove vnode_if.h for rev 1.14. 2004-12-29 21:50:44 +00:00
Warner Losh
a4aef7f9a4 We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
Kenneth D. Merry
98cb733c67 At long last, commit the zero copy sockets code.
MAKEDEV:	Add MAKEDEV glue for the ti(4) device nodes.

ti.4:		Update the ti(4) man page to include information on the
		TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
		and also include information about the new character
		device interface and the associated ioctls.

man9/Makefile:	Add jumbo.9 and zero_copy.9 man pages and associated
		links.

jumbo.9:	New man page describing the jumbo buffer allocator
		interface and operation.

zero_copy.9:	New man page describing the general characteristics of
		the zero copy send and receive code, and what an
		application author should do to take advantage of the
		zero copy functionality.

NOTES:		Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
		TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.

conf/files:	Add uipc_jumbo.c and uipc_cow.c.

conf/options:	Add the 5 options mentioned above.

kern_subr.c:	Receive side zero copy implementation.  This takes
		"disposable" pages attached to an mbuf, gives them to
		a user process, and then recycles the user's page.
		This is only active when ZERO_COPY_SOCKETS is turned on
		and the kern.ipc.zero_copy.receive sysctl variable is
		set to 1.

uipc_cow.c:	Send side zero copy functions.  Takes a page written
		by the user and maps it copy on write and assigns it
		kernel virtual address space.  Removes copy on write
		mapping once the buffer has been freed by the network
		stack.

uipc_jumbo.c:	Jumbo disposable page allocator code.  This allocates
		(optionally) disposable pages for network drivers that
		want to give the user the option of doing zero copy
		receive.

uipc_socket.c:	Add kern.ipc.zero_copy.{send,receive} sysctls that are
		enabled if ZERO_COPY_SOCKETS is turned on.

		Add zero copy send support to sosend() -- pages get
		mapped into the kernel instead of getting copied if
		they meet size and alignment restrictions.

uipc_syscalls.c:Un-staticize some of the sf* functions so that they
		can be used elsewhere.  (uipc_cow.c)

if_media.c:	In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
		calling malloc() with M_WAITOK.  Return an error if
		the M_NOWAIT malloc fails.

		The ti(4) driver and the wi(4) driver, at least, call
		this with a mutex held.  This causes witness warnings
		for 'ifconfig -a' with a wi(4) or ti(4) board in the
		system.  (I've only verified for ti(4)).

ip_output.c:	Fragment large datagrams so that each segment contains
		a multiple of PAGE_SIZE amount of data plus headers.
		This allows the receiver to potentially do page
		flipping on receives.

if_ti.c:	Add zero copy receive support to the ti(4) driver.  If
		TI_PRIVATE_JUMBOS is not defined, it now uses the
		jumbo(9) buffer allocator for jumbo receive buffers.

		Add a new character device interface for the ti(4)
		driver for the new debugging interface.  This allows
		(a patched version of) gdb to talk to the Tigon board
		and debug the firmware.  There are also a few additional
		debugging ioctls available through this interface.

		Add header splitting support to the ti(4) driver.

		Tweak some of the default interrupt coalescing
		parameters to more useful defaults.

		Add hooks for supporting transmit flow control, but
		leave it turned off with a comment describing why it
		is turned off.

if_tireg.h:	Change the firmware rev to 12.4.11, since we're really
		at 12.4.11 plus fixes from 12.4.13.

		Add defines needed for debugging.

		Remove the ti_stats structure, it is now defined in
		sys/tiio.h.

ti_fw.h:	12.4.11 firmware.

ti_fw2.h:	12.4.11 firmware, plus selected fixes from 12.4.13,
		and my header splitting patches.  Revision 12.4.13
		doesn't handle 10/100 negotiation properly.  (This
		firmware is the same as what was in the tree previously,
		with the addition of header splitting support.)

sys/jumbo.h:	Jumbo buffer allocator interface.

sys/mbuf.h:	Add a new external mbuf type, EXT_DISPOSABLE, to
		indicate that the payload buffer can be thrown away /
		flipped to a userland process.

socketvar.h:	Add prototype for socow_setup.

tiio.h:		ioctl interface to the character portion of the ti(4)
		driver, plus associated structure/type definitions.

uio.h:		Change prototype for uiomoveco() so that we'll know
		whether the source page is disposable.

ufs_readwrite.c:Update for new prototype of uiomoveco().

vm_fault.c:	In vm_fault(), check to see whether we need to do a page
		based copy on write fault.

vm_object.c:	Add a new function, vm_object_allocate_wait().  This
		does the same thing that vm_object allocate does, except
		that it gives the caller the opportunity to specify whether
		it should wait on the uma_zalloc() of the object structre.

		This allows vm objects to be allocated while holding a
		mutex.  (Without generating WITNESS warnings.)

		vm_object_allocate() is implemented as a call to
		vm_object_allocate_wait() with the malloc flag set to
		M_WAITOK.

vm_object.h:	Add prototype for vm_object_allocate_wait().

vm_page.c:	Add page-based copy on write setup, clear and fault
		routines.

vm_page.h:	Add page based COW function prototypes and variable in
		the vm_page structure.

Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
Brooks Davis
0fddbf8747 vlan.h is obsolete, don't create it anymore. 2001-09-05 23:47:02 +00:00
David E. O'Brien
c68159a6d8 Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
Peter Wemm
64db83a8ab Use .include <bsd.kmod.mk> to get to ../../*/conf/kmod.mk instead of
encoding the relative path.
2000-05-27 01:14:33 +00:00
Peter Wemm
56ca39961b Pull in sys/conf/kmod.mk, rather than /usr/share/mk/bsd.kmod.mk.
This means that the kernel can be totally self contained now and is not
dependent on the last buildworld to update /usr/share/mk.  This might
also make it easier to build 5.x kernels on 4.0 boxes etc, assuming
gensetdefs and config(8) are updated.
2000-05-04 12:08:52 +00:00
Bruce Evans
9e4be63dd6 Add ${DEBUG_FLAGS} to CFLAGS in bsd.kmod.mk, not in scattered module
makefiles.  Bad examples in fxp/Makefile keep getting copied to new
makefiles.
2000-01-28 11:26:46 +00:00
Bruce Evans
6f940b3847 Removed special rules for building and cleaning device interface files
and empty options files.  The rules are now generated automatically in
bsd.kmod.mk.  Cleaned up related things ($S and ${CLEANFILES}).
1999-11-28 18:53:47 +00:00
Peter Wemm
f274c85d8b Zap some unused echo "#define NFOO 1" > foo.h style defunct stuff. 1999-09-27 01:04:44 +00:00
Peter Wemm
18b039eb04 Don't generate 'bpf.h' since it's not used. 1999-09-27 00:34:02 +00:00
David E. O'Brien
40ec3caac8 Change the name of the installed KLM to contain a leading "if_".
Except for miibus which is now installed as miibus.ko.

Discussed by:	msmith, peter, and wpaul
1999-09-20 06:11:48 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
08339b4fa4 Convert the VIA Rhine driver to newbus and set it up to be compiled as
a module. Also modified the code to work on FreeBSD/alpha and added
device vr0 to the alpha GENERIC config.

While I was in the neighborhood, I noticed that I was still using
#define NFPX 1 in all of the Makefiles that I'd copied from the fxp
module. I don't really use #define Nfoo X so it didn't matter, but
I decided to customize this correctly anyway.
1999-08-10 17:15:20 +00:00
Bill Paul
98edb3e178 Create module directories for the xl, ti, tl and sk drivers and add
them to the Makefile so that modules will be generated for /modules.
1999-07-23 05:48:01 +00:00