Commit Graph

25 Commits

Author SHA1 Message Date
David E. O'Brien
677b542ea2 Use __FBSDID(). 2003-06-11 00:56:59 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Poul-Henning Kamp
182a9f7455 Make nokqfilter() return the correct return value.
Ditch the D_KQFILTER flag which was used to prevent calling NULL pointers.
2003-03-03 16:24:47 +00:00
Maxime Henrion
bca0668a92 We can now properly return ENODEV in nommap(), so do it.
Remove the now wrong comment which says we can't.
2003-02-27 14:48:53 +00:00
Maxime Henrion
07159f9c56 Cleanup of the d_mmap_t interface.
- Get rid of the useless atop() / pmap_phys_address() detour.  The
  device mmap handlers must now give back the physical address
  without atop()'ing it.
- Don't borrow the physical address of the mapping in the returned
  int.  Now we properly pass a vm_offset_t * and expect it to be
  filled by the mmap handler when the mapping was successful.  The
  mmap handler must now return 0 when successful, any other value
  is considered as an error.  Previously, returning -1 was the only
  way to fail.  This change thus accidentally fixes some devices
  which were bogusly returning errno constants which would have been
  considered as addresses by the device pager.
- Garbage collect the poorly named pmap_phys_address() now that it's
  no longer used.
- Convert all the d_mmap_t consumers to the new API.

I'm still not sure wheter we need a __FreeBSD_version bump for this,
since and we didn't guarantee API/ABI stability until 5.1-RELEASE.

Discussed with:		alc, phk, jake
Reviewed by:		peter
Compile-tested on:	LINT (i386), GENERIC (alpha and sparc64)
Runtime-tested on:	i386
2003-02-25 03:21:22 +00:00
Poul-Henning Kamp
2c6b49f6af NO_GEOM cleanup:
Retire the "d_dump_t" and use the "dumper_t" type instead.

Dumper_t takes a void * as first arg which is more general than the
dev_t taken by d_dump_t.  (Remember: we could have net-dumpers if
somebody wrote us one!)

Define the convention for GEOM controlled disk devices to be that the
first argument to the dumper function is the struct disk pointer.

Change device drivers accordingly.
2003-02-21 19:00:48 +00:00
Poul-Henning Kamp
81661c94b6 Here follows the new kernel dumping infrastructure.
Caveats:

The new savecore program is not complete in the sense that it emulates
enough of the old savecores features to do the job, but implements none
of the options yet.

I would appreciate if a userland hacker could help me out getting savecore
to do what we want it to do from a users point of view, compression,
email-notification, space reservation etc etc.  (send me email if
you are interested).

Currently, savecore will scan all devices marked as "swap" or "dump" in
/etc/fstab _or_ any devices specified on the command-line.

All architectures but i386 lack an implementation of dumpsys(), but
looking at the i386 version it should be trivial for anybody familiar
with the platform(s) to provide this function.

Documentation is quite sparse at this time, more to come.

Details:

ATA and SCSI drivers should work as the dump formatting code has been
removed.  The IDA, TWE and AAC have not yet been converted.

Dumpon now opens the device and uses ioctl(DIOCGKERNELDUMP) to set
the device as dumpdev.  To implement the "off" argument, /dev/null
is used as the device.

Savecore will fail if handed any options since they are not (yet)
implemented.  All devices marked "dump" or "swap" in /etc/fstab
will be scanned and dumps found will be saved to diskfiles
named from the MD5 hash of the header record.  The header record
is dumped in readable format in the .info file.  The kernel
is not saved.  Only complete dumps will be saved.

All maintainer rights for this code are disclaimed: feel free to
improve and extend.

Sponsored by:   DARPA, NAI Labs
2002-03-31 22:37:00 +00:00
Poul-Henning Kamp
d9888e41d5 GC the unused einval()
Obtained from:	~bde/sys.dif.gz
2002-02-10 22:07:41 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Jonathan Lemon
608a3ce62a Extend kqueue down to the device layer.
Backwards compatible approach suggested by: peter
2001-02-15 16:34:11 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Peter Wemm
ccb84588dd Try an fix a couple of dev_t/major/minor etc nits. 1999-05-12 22:30:50 +00:00
Doug Rabson
7095ee912b * Fix a couple of places in the device pager where an address was
truncated to 32 bits.
* Change the calling convention of the device mmap entry point to
  pass a vm_offset_t instead of an int for the offset allowing
  devices with a larger memory map than (1<<32) to be supported
  on the alpha (/dev/mem is one such).

These changes are required to allow the X server to mmap the various
I/O regions used for device port and memory access on the alpha.
1998-11-08 12:39:07 +00:00
Bruce Evans
5879dcdb05 Moved `nx' functions to the one place where they are used (su.c).
They shouldn't be used there either.  They should have gone away
about 3 years ago when the statically initialized devswitches went
away, but su.c unfortunately still frobs the cdevswitch in the old
way.
1998-08-20 06:10:42 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Peter Wemm
d87652c3de Zap nxselect and noselect. 1997-09-14 02:50:28 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
John Dyson
996c772f58 This is the kernel Lite/2 commit. There are some requisite userland
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.

The system boots and can mount UFS filesystems.

Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
		Mount_std mounts will not work until the getfsent
		library routine is changed.

Reviewed by:	various people
Submitted by:	Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
8b25681eb5 Replaced bogus macros for dummy devswitch entries by functions.
These functions went away:

	enosys (hasn't been used for some time)
	enxio
	enodev
	enoioctl (was used only once, actually for a vop)

if_tun.c:
Continued cleaning up...

conf.h:
Probably fixed the type of d_reset_t.  It is hard to tell the correct
type because there are no non-dummy device reset functions.

Removed last vestige of ambiguous sleep message strings.
1995-11-06 00:36:19 +00:00
Bruce Evans
e7451974bb Make pcvt and syscons live in the same kernel. If both are enabled, then
the first one in the config has priority.  They can be switched using
userconfig().

i386/i386/conf.c:
Initialize the shared syscons/pcvt cdevsw entry to `nx'.

Add cdevsw registration functions.

Use devsw functions of the correct type if they exist.

i386/i386/cons.c:
Add renamed syscons entry points to constab.

i386/i386/cons.h:
Declare the renamed syscons entry points.

i386/i386/machdep.c:
Repeat console initialization after userconfig() in case the current
console has become wrong.  This depends on cn functions not wiring down
anything important.

sys/conf.h:
Declare new functions.

i386/isa/isa.[ch]:
Add a function to decide which display driver has priority.  Should be
done better.

i386/isa/syscons.c:
Rename pccn* -> sccn*.

Initialize CRTC start address in case the previous driver has moved it.

i386/isa/syscons.c, i386/isa/pcvt/*
Initialize the bogusly shared variable Crtat dynamically in case the
stored value was changed by the previous driver.

Initialize cdevsw table from a template.

Don't grab the console if another display driver has priority.

i386/isa/syscons.h, i386/isa/pcvt/pcvt_hdr.h:
Don't externally declare now-static cdevsw functions.

i386/isa/pcvt/pcvt_hdr.h:
Set the sensitive hardware flag so that pcvt doesn't always have lower
priority than syscons.  This also fixes the "stupid" detection of the
display after filling the display with text.

i386/isa/pcvt/pcvt_out.c:
Don't be confused the off-screen cursor offset 0xffff set by syscons.

kern/subr_xxx.c:
Add enough nxio/nodev/null devsw functions of the correct type for syscons
and pcvt.
1995-09-10 21:36:12 +00:00
David Greenman
3c4dd3568f Added $Id$ 1994-08-02 07:55:43 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Rodney W. Grimes
df8bae1de4 BSD 4.4 Lite Kernel Sources 1994-05-24 10:09:53 +00:00