is a completely separate TCP stack (tcp_bbr.ko) that will be built only if
you add the make options WITH_EXTRA_TCP_STACKS=1 and also include the option
TCPHPTS. You can also include the RATELIMIT option if you have a NIC interface that
supports hardware pacing, BBR understands how to use such a feature.
Note that this commit also adds in a general purpose time-filter which
allows you to have a min-filter or max-filter. A filter allows you to
have a low (or high) value for some period of time and degrade slowly
to another value has time passes. You can find out the details of
BBR by looking at the original paper at:
https://queue.acm.org/detail.cfm?id=3022184
or consult many other web resources you can find on the web
referenced by "BBR congestion control". It should be noted that
BBRv1 (which this is) does tend to unfairness in cases of small
buffered paths, and it will usually get less bandwidth in the case
of large BDP paths(when competing with new-reno or cubic flows). BBR
is still an active research area and we do plan on implementing V2
of BBR to see if it is an improvement over V1.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D21582
Instead of predicting the MSI-X bar index based on the device's MAC
type, read it from the device's PCI configuration instead.
PR: 239704
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21547
From Piotr:
r351152 introduced iflib_deregister() function calling
EVENTHANDLER_DEREGISTER() to unregister VLAN events. This patch removes
duplicate of EVENTHANDLER_DEREGISTER() calls placed in
iflib_device_deregister() as this function is now calling
iflib_deregister(). This is to avoid deregistering same event twice.
This patch also adds check in iflib_vlan_register() to prevent
registering VLAN while being in detach.
Patch co-authored by Krzysztof Galazka <krzysztof.galazka@intel.com>,
erj <erj@FreeBSD.org> and Jacob Keller <jacob.e.keller@intel.com>.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: gallatin@, erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21711
For a long time, some places in the NFS code have locked/unlocked the
NFS node lock with the macros NFSLOCKNODE()/NFSUNLOCKNODE() whereas
others have simply used mtx_lock()/mtx_unlock().
Since the NFS node mutex needs to change to an sx lock so it can be held when
vnode_pager_setsize() is called, replace all occurrences of mtx_lock/mtx_unlock
with the macros to simply making the change to an sx lock in future commit.
There is no semantic change as a result of this commit.
I am not sure if the change to an sx lock will be MFC'd soon, so I put
an MFC of 1 week on this commit so that it could be MFC'd with that commit.
Suggested by: kib
MFC after: 1 week
- track the total count of hot entries
- pre-read the lock when shrinking since it is typically already taken
- place the lock in its own cacheline
- shorten the hold time of hot lock list when zapping
Sponsored by: The FreeBSD Foundation
- For each queue pair precalculate CPU and domain it is bound to.
If queue pairs are not per-CPU, then use the domain of the device.
- Allocate most of queue pair memory from the domain it is bound to.
- Bind callouts to the same CPUs as queue pair to avoid migrations.
- Do not assign queue pairs to each SMT thread. It just wasted
resources and increased lock congestions.
- Remove fixed multiplier of CPUs per queue pair, spread them even.
This allows to use more queue pairs in some hardware configurations.
- If queue pair serves multiple CPUs, bind different NVMe devices to
different CPUs.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
There is no reason for these routines to be written in assembly. In
the ports of DTrace to other platforms, they are already written in C.
No functional change intended.
MFC after: 1 week
Sponsored by: Netflix
The direct map is never used for execution of code, so we might as well
set NX in the direct map's PML4Es. Also clarify the intent of the code
in create_pagetables() that restricts access protections on the region
of the direct map mapping the kernel text.
Reviewed by: alc, kib (previous version)
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21759
This is required for DPCPU and VNET data variable definitions to work when
KLDs are linked as DSOs. R_X86_64_RELATIVE relocations should not appear
in object files, so assert this in elf_relocaddr().
Reviewed by: kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21755
There does not appear to be any existing need for such mappings to be
executable.
Reviewed by: alc, kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21754
If robust mutex' owner terminated, causing kernel-assisted state
recovery, and then pthread_mutex_destroy() is executed as the next
action, assert is triggered about mutex still being on the list.
Ignore the mutex linkage in pthread_mutex_destroy() for shared robust
mutexes with dead owner, same as for enqueue_mutex().
Reported by: avg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
SYSINIT usage was added, but the <sys/kernel.h> dependency was not added.
This worked by coincidence, as most of the mips configs have DDB enabled and
pmap.c gets <sys/kernel.h> via ddb.h pollution.
Reported by: dim
The two options are
* nocover/cover: Prevent/allow mounting over an existing root mountpoint.
E.g., "mount -t ufs -o nocover /dev/sd1a /usr/local" will fail if /usr/local
is already a mountpoint.
* emptydir/noemptydir: Prevent/allow mounting on a non-empty directory.
E.g., "mount -t ufs -o emptydir /dev/sd1a /usr" will fail.
Neither of these options is intended to be a default, for historical and
compatibility reasons.
Reviewed by: allanjude, kib
Differential Revision: https://reviews.freebsd.org/D21458
by defining pg_nx as zero for non-PAE and correspondingly simplifying
some expressions.
Suggested and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21757
Decode PAT_UNCACHED.
When unknown pat mode is encountered, print the pte bits combination
instead of the index, which is always 8.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21738
Clang sees this construct and warns that adding an int to a string like this
does not concatenate the two. Fortunately, this is not what octeon-sdk
actually intended to do, so we take the path towards remediation that clang
offers: use array indexing instead.
These appear in octeon-sdk -- there are new releases, but they don't seem to
address the running issues in octeon-sdk. GCC4.2 is more than happy, but
clang is much less-so and most of them are fairly innocuous and perhaps a
by-product of their style guide, which may make some of the changes harder
to upstream (if this is even possible anymore).
Add support for kernel threads in kvm_getprocs() and the underlying
kvm_proclist() in libkvm when fetching from a kernel core file. This
has been missing/needed for several releases, when kernel threads became
normal threads. The loop over the processes now contains a sub-loop for
threads, which iterates beyond the first thread only when threads are
requested. Also set some fields such as tid that were previously
uninitialized.
Reviewed by: vangyzen jhb(earlier revision)
MFC after: 4 days
Sponsored by: Forcepoint LLC
Differential Revision: https://reviews.freebsd.org/D21461
This avoids a double lock bug in the NAT colliding state processing
of SCTP. Thanks to Felix Weinrank for finding and reporting this issue in
https://github.com/sctplab/usrsctp/issues/374
He found this bug using fuzz testing.
MFC after: 3 days
before computing the RTO.
This should fix an overflow issue reported by Felix Weinrank in
https://github.com/sctplab/usrsctp/issues/375
for the userland stack and found by running a fuzz tester.
MFC after: 3 days
Add a small wrapper around libzfs_core's lzc_send_space() to libzfs so
that every legacy ZFS_IOC_SEND consumer, along with their userland
counterpart estimate_ioctl(), can leverage ZFS_IOC_SEND_SPACE to
request send space estimation.
The legacy functionality in zfs_ioc_send() is left untouched for
compatibility purposes.
Obtained from: ZoL
Obtained from: zfsonlinux/zfs@cf7684bc8d
Author: loli10K <ezomori.nozomu@gmail.com>
MFC after: 2 weeks
Although there is always a single stream and the total size in the
summary is always equal to the size reported for the stream, it's nice
to follow the usual output format.
MFC after: 3 days
within a critical section, we must perform a lock-free check on the
faulting address.
Reported by: andrew
Reviewed by: andrew, markj
X-MFC with: r350579
Differential Revision: https://reviews.freebsd.org/D21685
The way jot(1) defaults missing arguments doesn't match the behaviour
described in the manpage, which states that with fewer than 3 arguments
missing values are supplied from left to right.
In fact, with one or two arguments, the last (s which is step size or seed)
defaults to 1 (or -1 if begin and end specify a descending range), and then
omitted arguments are set to default starting with the leftmost until three
arguments are available.
This is why `jot 2 1000` prints 1000 and 1001 instead of 1000 and 100.
PR: 135475
Submitted by: Jonathan McKeown <j.mckeown@ru.ac.za>
Approved by: doc (bcr)
Differential Revision: https://reviews.freebsd.org/D21736
Event: EuroBSDcon 2019
