gzip(1). gdb doesn't understand these, but then again it didn't
understand compressed crashdumps either.
* Change a stray lseek() into a Lseek()
* Remove the extraneous prototype for log() which has apparently never
existed in FreeBSD's sources
Obtained from: NetBSD (partially)
MFC after: 2 weeks
COPTS towards the end of final CFLAGS so that it can be used to
override Makefile and other defaults. Using it in Makefiles risks
having options set using it clobbered when somebody uses it on the
command line.
Approved by: bde
where the headers should live, as the code references both "ip_fil.h" and
"netinet/ip_fil.h" (among others). As a consequence, put both
sys/contrib/ipfilter and sys/contrib/ipfilter/netinet to the include path
so either variant works.
PR: 29384
Pointed out by: Thomas.Quinot@Cuivre.FR.EU.ORG
Allow non-superuser to open, listen to, and send safe commands on the
routing socket. Superuser priviledge is required for all commands
but RTM_GET.
Lose `setuid root' bit of route(8).
Reviewed by: wollman, dd
At the times, restore(8) and rrestore(8) were the different
utilities. rrestore(8) was installed setuid `root', while
restore(8) with usual ownership and privileges. Later on,
on August 28, 1991 (what a coincidence!), rrestore(8) code
was merged with restore(8). The setgid `tty' bit then was
accidentally put.
default if the executable is named (called as) "mount_*", or can be
enabled with the -C option. This allows users to leave their old
fstab entires unchanged (modulo symlink'ing mdmfs to mount(md|mfs))
and have things behave the way they should (by emulating mount_mfs
silliness), while still allowing mdmfs to be used as a generic
make-an-md-and-mount-it type thing.
Right now, the only effects of this option is to set the mount-point
mode to 01777 as if "-p 1777" was given, and to complain about getting
command-line options that mount_mfs didn't take (e.g., -X, -L, et al).
The latter is mostly to try to catch operator errors.
Also implement -U, which turns on soft-updates. It's redundant (since
softdep is the default), but implement it anyway for compatibility.
bypass some extra anti-foot-shooting measures. Currently, its only
effect is to allow detaching a device while it's still open (e.g.,
mounted). This is useful for testing how the system reacts to a disk
suddenly going away, which can happen with some removeable media.
At this point, the force option is only checked on detach, so it
would've been possible to allow the option to be passed with the
MDIOCDETACH operation. This was not done to allow the possibility of
having the force flag influence other tests in the future, which may
not necessarily deal with detaching the device.
Reviewed by: sobomax
Approved by: phk
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
into sadb_x_sa2_sequence from sadb_x_sa2_reserved3 in the sadb_x_sa2
structure. Also the output of setkey is changed. sequence number
of the sadb is replaced to the end of the output.
Obtained from: KAME
pointed out by bde:
- Ask for user confirmation before adjusting to a head/cylinder
boundary (only when running interactively), and separate this
adjustment from the automatic calculation of c/h/s parameters.
- In sanitize_partition, don't change any values in the slice until
we know that the automatic adjustment will succeed.
- When auto-adjusting, ignore unused slices and give an appropriate
error for other zero-size slices depending on the cause.
- Change dos() to do all of the c/h/s calculations for a whole slice;
this fixes a bug where the ending c/h/s of an unused slice was set
incorrectly.
- When changing the active slice, detect the currently active slice
number instead of always defaulting to slice 4.
- Call fflush(stdout) before calling fgets().
- Test for fgets() returning NULL so we don't loop on EOF.
Reviewed by: bde
1.) prefix all functions in the library with devstat_ (compatability
functions are available for all functions that were chaned in an
incompatible way, but are deprecated).
2.) Add a pointer to a kvm_t as the first argument to functions that
used to get their information via sysctl; they behave the same
as before when NULL is passed as this argument, otherwise, the
information is obtained via libkvm using the supplied handle.
3.) Add a new function, devstat_compute_statistics(), that is intended
to replace the old compute_stats() function. It offers more
statistics data, and has a more flexible interface.
libdevstat does now require libkvm; a library depedency is added, so
that libkvm only needs to be explicitely specified for statically linked
programs.
The library major version number is bumped.
Submitted by: Sergey A. Osokin <osa@freebsd.org.ru>, ken (3)
Reviewed by: ken
- Declare mtabhead as an extern in mounttab.h and define it only in
mounttab.c.
- Remove shared global `verbose' and instead pass it as a parameter.
- Remove the `mtabp' argument to read_mtab(). It served no purpose
whatsoever, although read_mtab() did use it as a temporary local
variable.
- Don't check for impossible conditions when parsing mounttab, and
do detect zero-length fields.
- Correctly test for strtoul() failures - just testing ERANGE is wrong.
- Include a field name in syslog errors, and avoid passing NULL to
a syslog %s field.
- Don't test if arrays are NULL.
- If there are duplicates when writing out mounttab, keep the last
entry instead of the first, as it will have a later timestamp.
- Fix a few formatting issues.
Update rpc.umntall and umount to match the mounttab interface changes.
information for any command line error, the actual error message
almost always (and sometimes irretrievably) lost scrolling off the top
of the screen. Now just print the error. Give ipfw(8) no arguments for
the old usage summary.
Thanks to Lyndon Nerenberg <lyndon@orthanc.ab.ca> for the patch and
PR, but I had already done this when ru pointed out the PR.
PR: bin/28729
Approved by: ru
MFC after: 1 week
immediately if a host specified by the -h flag cannot be parsed
instead of attempting to unmount all NFS filesystems, which was
bad.
Add a missing return statement at the end of checkname(); this
could result in a non-zero exit status in some cases even if the
unmount succeeded.
Group two separate NFS-related operations into one block to make
it more obvious that a variable (hostp) is not dereferenced when
uninitialised. Initialise it to NULL anyway to avoid a warning.
Pass in the read_mtab()'s bogus argument as NULL instead of messing
with a local variable to achieve the same effect. A later commit
will clean up this mounttab interface.
forever by default. This matches what mount_nfs did before revision
1.40, and it is the generally expected behaviour for NFS mounts.
Document the current defaults near the start of the man page and
mention the options that can be used to change them.
Discussed on: -hackers
to give up after one attempt unless a background mount is requested.
Background mounts would retry 10000 times (at least 7 days) before
giving up.
For some situations such as diskless terminals, an NFS filesystem
may be critical to the boot process, so neither the "try once" nor
background mounts are appropiate. To cater for this situation,
unbreak the -R (retry count) parameter so that it also works in
the non-background case. Interpret a zero retry count as "retry
forever".
The defaults are now "try once" for non-background mounts and "retry
forever" for background mounts; both can be overridden via -R.
Add a description of this behaviour to the manpage.
device search code i introduce nearly six years ago in rev 1.8. Bruce
suggested to rather use the device name of the root filesystem instead
which is certainly the most sensible default. Since there are many
possible cases for a root filesystem name (device with and without
slices, consider /dev/vinum/root even though it currently could not
work as such), there's some heuristic using a RE in order to find out
the canonical device name from the mounted name. This probably won't
quite fit for a NFS root (can't test that right now), but then,
there's hard to find a good default for those machines anyway. ;-)
This unbreaks the functionality of rev 1.2 i once broke in 1.8. :)
to use 0xffffffff (INADDR_NONE) as a netmask value. The fix
is to use inet_addr(3) which doesn't suffer from this problem.
PR: bin/28873
Also, while here, fixed the bug when netmask value was ignored
(RTF_HOST flag was set) if the "destination gateway netmask"
syntax is used, e.g. ``route add 1.2.3.4 127.1 255.255.255.255''.
The original code was certainly broken; it knows that whereto is
to be used for a sockaddr_in, so it should be declared as such.
To support multiple protocols, there is also a sockaddr_storage
struct that can be used; I don't think struct sockaddr is supposed
to be used anywhere other than for casts and pointers.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
MFC after: 3 weeks
This one is strange and goes against my rusty compiler knowledge.
The global declaration
struct sockaddr whereto;
produces for both i386 && alpha:
.comm whereto,16,1
which means common storage, byte aligned. Ahem. I though structs
were supposed to be ALDOUBLE always? I mean, w/o pragma packed?
Later on, this address is coerced to:
to = (struct sockaddr_in *)&whereto;
Up until now, we've been fine on alpha because the address
just ended up aligned to a 4 byte boundary. Lately, though,
it end up as:
0000000120027b0f B whereto
And, tra la, you get unaligned access faults. The solution I picked, in
lieu of understanding what the compiler was doing, is to put whereto
as a union of a sockaddr and sockaddr_in. That's more formally correct
if somewhat awkward looking.
prematurely terminate the search for a usable disk. ENOENT is quite
normal in particulare now with the advent of devfs.
While being here, also remove /dev/wd0 and /dev/od0 from the list of
disks to search since we don't have them anymore.
MFC after: 1 week
backslash as nothing, treat it like a space so that adjacent lines
aren't glued together.
PR: 8479
Submitted by: Adrian Filipi-Martin <adrian@ubergeeks.com>
user runs with privilege, allowing the sending of icmp packets with
larger size (up to 48k, the default receive buffer size in ping),
which is useful for network driver development testing, as well
as experimentation with fragmentation.
Reviewed by: wpaul
ensure that we never proceed with the mount() syscall if the server
is replying from the wrong source address. Previously the userland
RPC call to the remote nfsd would succeed, but the kernel uses
connect() so it would not see the replies, resulting in a hung
mount.
