fixes the problem of UDP sockets getting wedged in a connected state (and
bound to their destination) under heavy load.
Temporary bind/connect should probably be deleted in future
as an optimization, as described in "A Faster UDP" [Partridge/Pink 1993].
Notes:
- INP_LOCK() is already held in udp_output(). The connection is in effect
happening at a layer lower than the socket layer, therefore in theory
socket locking should not be needed.
- Inlining the in_pcbdisconnect() operation buys us nothing (in the case
of the current state of the code), as laddr is not part of the
inpcb hash or the udbinfo hash. Therefore there should be no need
to rehash after restoring laddr in the error case (this was a
concern of the original author of the patch).
PR: kern/41765
Requested by: gnn
Submitted by: Jinmei Tatuya (with cleanups)
Tested by: spray(8)
labeling new mbufs created from sockets/inpcbs in IPv4. This helps avoid
the need for socket layer locking in the lower level network paths
where inpcb locks are already frequently held where needed. In
particular:
- Use the inpcb for label instead of socket in raw_append().
- Use the inpcb for label instead of socket in tcp_output().
- Use the inpcb for label instead of socket in tcp_respond().
- Use the inpcb for label instead of socket in tcp_twrespond().
- Use the inpcb for label instead of socket in syncache_respond().
While here, modify tcp_respond() to avoid assigning NULL to a stack
variable and centralize assertions about the inpcb when inp is
assigned.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, McAfee Research
the syscall arguments and does the suser() permission check, and
kern_mlock(), which does the resource limit checking and calls
vm_map_wire(). Split munlock() in a similar way.
Enable the RLIMIT_MEMLOCK checking code in kern_mlock().
Replace calls to vslock() and vsunlock() in the sysctl code with
calls to kern_mlock() and kern_munlock() so that the sysctl code
will obey the wired memory limits.
Nuke the vslock() and vsunlock() implementations, which are no
longer used.
Add a member to struct sysctl_req to track the amount of memory
that is wired to handle the request.
Modify sysctl_wire_old_buffer() to return an error if its call to
kern_mlock() fails. Only wire the minimum of the length specified
in the sysctl request and the length specified in its argument list.
It is recommended that sysctl handlers that use sysctl_wire_old_buffer()
should specify reasonable estimates for the amount of data they
want to return so that only the minimum amount of memory is wired
no matter what length has been specified by the request.
Modify the callers of sysctl_wire_old_buffer() to look for the
error return.
Modify sysctl_old_user to obey the wired buffer length and clean up
its implementation.
Reviewed by: bms
at packet arrival.
For benchmarking purposes SO_BINTIME is preferable to SO_TIMEVAL
since it has higher resolution and lower overhead. Simultaneous
use of the two options is possible and they will return consistent
timestamps.
This introduces an extra test and a function call for SO_TIMEVAL, but I have
not been able to measure that.
the routing table. Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.
It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination. Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.
tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.
It removes significant locking requirements from the tcp stack with
regard to the routing table.
Reviewed by: sam (mentor), bms
Reviewed by: -net, -current, core@kame.net (IPv6 parts)
Approved by: re (scottl)
the MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols. This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.
This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.
For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks. Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.
Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.
Reviewed by: sam, bms
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
This switch toggles between strict multicast delivery, and traditional
multicast delivery.
The traditional (default) behaviour is to deliver multicast datagrams to all
sockets which are members of that group, regardless of the network interface
where the datagrams were received.
The strict behaviour is to deliver multicast datagrams received on a
particular interface only to sockets whose membership is bound to that
interface.
Note that as a matter of course, multicast consumers specifying INADDR_ANY
for their interface get joined on the interface where the default route
happens to be bound. This switch has no effect if the interface which the
consumer specifies for IP_ADD_MEMBERSHIP is not UP and RUNNING.
The original patch has been cleaned up somewhat from that submitted. It has
been tested on a multihomed machine with multiple QuickTime RTP streams
running over the local switch, which doesn't do IGMP snooping.
PR: kern/58359
Submitted by: William A. Carrel
Reviewed by: rwatson
MFC after: 1 week
specific interfaces. This is required by aodvd, and may in future help us
in getting rid of the requirement for BPF from our import of isc-dhcp.
Suggested by: fenestro
Obtained from: BSD/OS
Reviewed by: mini, sam
Approved by: jake (mentor)
a server process bound to a wildcard UDP socket to select the IP
address from which outgoing packets are sent on a per-datagram
basis. When combined with IP_RECVDSTADDR, such a server process can
guarantee to reply to an incoming request using the same source IP
address as the destination IP address of the request, without having
to open one socket per server IP address.
Discussed on: -net
Approved by: re
to send datagrams from an unconnected socket, we used to first block
input, then connect the socket to the sendmsg/sendto destination,
send the datagram, and finally disconnect the socket and unblock
input.
We now use in_pcbconnect_setup() to check if a connect() would have
succeeded, but we never record the connection in the PCB (local
anonymous port allocation is still recorded, though). The result
from in_pcbconnect_setup() authorises the sending of the datagram
and selects the local address and port to use, so we just construct
the header and call ip_output().
Discussed on: -net
Approved by: re
configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).
As noted previously, don't use FAST_IPSEC with INET6 at the moment.
Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks
o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
inpcb parameter to ip_output and ip6_output to allow the IPsec code to
locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version
Reviewed by: julian, luigi (silent), -arch, -net, darren
Approved by: julian, silence from everyone else
Obtained from: openbsd (mostly)
MFC after: 1 month
we can use the names _receive() and _send() for the receive() and send()
checks. Rename related constants, policy implementations, etc.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
kernel access control.
Add MAC support for the UDP protocol. Invoke appropriate MAC entry
points to label packets that are generated by local UDP sockets,
and to authorize delivery of mbufs to local sockets both in the
multicast/broadcast case and the unicast case.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
SYSCTL_OUT() from blocking while locks are held. This should
only be done when it would be inconvenient to make a temporary copy of
the data and defer calling SYSCTL_OUT() until after the locks are
released.
indication of whether this happenned so the calling function
knows whether or not to unlock the pcb.
Submitted by: Jennifer Yang (yangjihui@yahoo.com)
Bug reported by: Sid Carter (sidcarter@symonds.net)
o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
socket buffer. The mutex in the receive buffer also protects the data
in struct socket.
o Determine the lock strategy for each members in struct socket.
o Lock down the following members:
- so_count
- so_options
- so_linger
- so_state
o Remove *_locked() socket APIs. Make the following socket APIs
touching the members above now require a locked socket:
- sodisconnect()
- soisconnected()
- soisconnecting()
- soisdisconnected()
- soisdisconnecting()
- sofree()
- soref()
- sorele()
- sorwakeup()
- sotryfree()
- sowakeup()
- sowwakeup()
Reviewed by: alfred
Requested by: bde
Since locking sigio_lock is usually followed by calling pgsigio(),
move the declaration of sigio_lock and the definitions of SIGIO_*() to
sys/signalvar.h.
While I am here, sort include files alphabetically, where possible.
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.
Discussed on: smp@
Move the network code from using cr_cansee() to check whether a
socket is visible to a requesting credential to using a new
function, cr_canseesocket(), which accepts a subject credential
and object socket. Implement cr_canseesocket() so that it does a
prison check, a uid check, and add a comment where shortly a MAC
hook will go. This will allow MAC policies to seperately
instrument the visibility of sockets from the visibility of
processes.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
