architectures. There's no definition for it, nobody uses it
and it is unlikely to ever work. We can put it back when someone
demonstrates it running...
The new default for armv6 is hard float, so extend that default
to the external toolchain support.
side effect of replacing /etc/{master.,}passwd and /etc/group.
Submitted by: O. Hartmann
Pointyhat to: gjb (myself)
Sponsored by: The FreeBSD Foundation
The old (^/stable/9) default was yes, not no ("no" was the new default
introduced recently that broke POLA). Restore it to keep POLA like
glebius intended in r299077
MFC after: 3 days
X-MFC with: r299086
Pointyhat to: ngie (research before assuming and committing next time)
Sponsored by: EMC / Isilon Storage Division
Without this the incremental build was broken since .depend.* are not
generated with .MAKE.MODE=meta and .meta files were not created to
track dependencies. Typically meta mode does not create .meta files
when building with curdir==objdir but the kernel build is special.
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
Sponsored by: EMC / Isilon Storage Division
This also protects them from trying to create .meta files
with WITH_META_MODE.
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
Sponsored by: EMC / Isilon Storage Division
created to avoid creating ${.OBJDIR}.
The duplicate REVISION/BRANCH/VERSION evaluation will be addressed
separately.
Sponsored by: The FreeBSD Foundation
When using meta mode with filemon, the build is reliably incremental
safe. Bmake will use the meta files, along with filemon information,
to rebuild targets when their dependencies change, commands change,
or files they generate are missing.
Sponsored by: EMC / Isilon Storage Division
Some of the clang libraries build in this phase and the cross-tools
phase. Later in the cross-tools phase when they build with a default
TOOLS_PREFIX, they see a changed build command in meta mode due to
the changed DEFAULT_SYSROOT. This is avoided by passing along
TOOLS_PREFIX earlier.
Sponsored by: EMC / Isilon Storage Division
This avoids 'build command changed' due to CFLAGS/CC changes during the
normal build. Without this the build-tools targets end up rebuilding
for the *target* rather than keeping the native versions built in
build-tools.
Sponsored by: EMC / Isilon Storage Division
The change in r284345 moved the creation of openpam_static_modules.o to
lib/libpam/static_modules but never managed to get them into libpam.a.
Move this logic to lib/libpam/static_libpam and have it create a static
library for libpam.a The main lib/libpam/libpam will only create a
shared library. No redundancy in compilation or installation exists
in this solution.
This avoids requiring a pass with -D_NO_LIBPAM_SO_YET.
Sponsored by: EMC / Isilon Storage Division
cause bizarre packaging failures with non-default OBJDIR
and/or MAKEOBJDIRPREFIX and REPODIR set to a location not
within OBJDIR.
Reported by: many
Tested by: sef
Sponsored by: The FreeBSD Foundation
GCC does add <sysroot>/usr/lib to the library search path but it comes after
/usr/local/lib which can find ports libraries such as libedit.so. The
bad path comes in as /usr/local/lib/gcc/x86_64-portbld-freebsd11.0/5.3.0/../../../
which corresponds to <prefix>/lib.
This partially reverts r297271.
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
In r296926 the -P <path> option was added to kbdcontrol, which enables
this change for a simplified compile-time default keymap build process.
PR: 193865
Reviewed by: Oliver Pinter
Tested by: Oliver Pinter
MFC After: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5708
The use of XCXXFLAGS is to assign it to CXX in CROSSENV.
XCFLAGS is also assigned here so there is no need to have
--syroot and -B flags again.
Sponsored by: EMC / Isilon Storage Division
Without this the default toolchain in /usr/bin/ would not use
WORLDTMP via --sysroot, and would lack --target if cross-building.
PR: 196193
Related: D3970
Sponsored by: EMC / Isilon Storage Division
- The -L WORLDTMP/usr/lib is not needed as GCC is already adding in
-L =/usr/lib internally with --sysroot. It does not do this for
header include paths though, thus passing -isystem =/usr/include is
still needed.
For the forced libc++ usage:
- Use -isystem rather than -I for libc++ headers.
- Use -std=c++11 rather than gnu++11.
- Use -nostdinc++ to ensure GCC's headers don't leak in.
Sponsored by: EMC / Isilon Storage Division
This overrides the cross-compiler's default sysroot to use the WORLD32's
sysroot for building the lib32 libraries. Previously the cross-compiler
would default the sysroot to the 64bit WORLDTMP and -B/-L/-isystem flags
were used to build using the lib32 files. This leads to multiple issues
discussed later. Some extra headers are now needed to be staged since the
64bit WORLDTMP is not referenced at all for headers. The 64bit WORLDTMP
is still used via PATH for build tools. Overriding the default
target/arch is retained in the CC/CXX overrides.
This allows reverting the LDSCRIPT rewriting in installworld from r296921 and
r235122, thus allowing read-only objdirs to work for installing again.
This removes the need for _LDSCRIPTROOT.
This allows progressing the change to always use --sysroot for the build
rather than only relying on the cross-compiler's default sysroot. The
work for that is in D3970 and needed to resolve WITHOUT_CROSS_COMPILER
not using a --sysroot [1].
PR: 196193 [1]
Sponsored by: EMC / Isilon Storage Division
This should fix the 'packages' target when MAKEOBJDIRPREFIX or
DESTDIR is set in the make(1) environment or via command line.
Reported by: kmoore, sef, Marko Turk
Sponsored by: The FreeBSD Foundation
for the armv6 ABI switch. This also make WITH_LIBSOFT functional on
the arm platform. As a transition thing, this seems to work even
without switching the ABI (we basically build the same libraries
twice when MK_LIBSOFT=yes until the ABI cut over next
month). MK_LIBSOFT remains default no.
This is in preparation for LIBSOFT.
This file only supports *1* LIBCOMPAT value currently and must be capitalized.
In Makefile.libcompat given LIBCOMPAT=FOO there can be values set for
LIBFOOCFLAGS, LIBFOOCPUFLAGS, LIBFOOWMAKEENV, LIBFOOWMAKEFLAGS, LIBFOOCPUFLAGS,
and LIBFOODTRACE. These will have the standard cross-build values appended
onto them.
This could be extended to support multiple libcompat libraries in the future
once there is a need.
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5612
similar Makefile.libsoft which will do the same for armv6 soft fp API
libraries in prep for pulling the trigger on moving to armv6 hard
float. Once there's two files, I'll work with bdrewery@ to merge the
two files as they are mostly the same. The high rate of churn for
Makefile* makes it quite difficult to make progress out of tree.
Differential Review: https://reviews.freebsd.org/D5566
Remove building of the legacy makewhatis(1) since it was only needed for
6.0 upgrades.
On my 2.2 GHz system libsqlite3 takes 60-100 seconds to build, which due to
its serialized nature can hold up the build waiting on it to finish in
bootstrap-tools.
makewhatis(1) was only required to be a build tool to support upgrades
from 6.0 which was properly removed in r208324 but later reverted due to
installworld using it. The installworld issue was fixed in r275622
when it was added to ITOOLS. A BOOTSTRAPPING check was missed when
makewhatis(1) was replaced with mandoc in r283777.
Sponsored by: EMC / Isilon Storage Division
When not using NO_ROOT the DESTDIR is implicitly created by the
distrib-dirs call. However with NO_ROOT it is trying to write
to the METALOG right away before running distrib-dirs which
may fail.
Sponsored by: EMC / Isilon Storage Division
shared library tracking.
Note, this requires a patched pkg(8) to do anything, but pkg(8)
does not complain when an option is specified that it does not
recognize.
Sponsored by: The FreeBSD Foundation
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
architectures we do not provide upstream pkg(8) packages.
This is not tied to anything as-is, and likely will break
your system if used (based on experience with testing with
powerpc).
There is an overwhelming amount of evil happening here,
so until the issues are fixed, it will not be tied into the
'packages' target.
Sponsored by: The FreeBSD Foundation
While functionally expected to be a no-op on big-iron hardware,
embedded hardware (arm, mips) do not have a GENERIC kernel, so
the KERNCONF value must be included in the package to avoid
conflicting packages for the default kernel (RPI-B versus RPI2,
for example).
While here, correct the kernel name in the metadata.
Sponsored by: The FreeBSD Foundation
Replace `make regress` (legacy test make target) and `make test` (incomplete
test make target added with the FreeBSD test suite) with make check as it's
consistent with other open source projects.
`make check` defaults to running tests from `.OBJDIR`, but can be overridden
with the `CHECKDIR` variable.
Add `make checkworld` target to simplify running the FreeBSD test suite from
`TESTSBASE` (i.e. the top-level tests directory), similar to buildworld.
Document `make check` and `make checkworld` in build(7).
Other minor changes:
- Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify
`make check`.
- Remove terse warnings attached to `beforetest`/`aftertest`.
- Add kyua binary check to check target in suite.test.mk; error out if it's
not found
The MFC is [partly] contingent on other build related changes being MFCed.
Differential Revision: https://reviews.freebsd.org/D4406
MFC after: 2 months
X-MFC to: stable/10
Relnotes: yes
Reviewed by: bdrewery, Evan Cramer <eccramer@gmail.com>
Sponsored by: EMC / Isilon Storage Division
One of the major pain points with how this was implemented
is the requirement of in-tree, hard-coded <name>.ucl, as
well as <name>-<suffix>.ucl where <suffix> can be lib32,
profile, development, debug, or any combination of the four.
This created significant overhead when adding new packages
and any of the files in any of the combinations were missing.
Instead of test(1)-ing if the <packagename>.ucl file exists,
hand off to a script to figure out what the final ucl file
name should be before invoking pkg(8).
The default behavior is 'template.ucl' is used as a fallback.
This affects only the userland packages, as the kernel code
is already smart enough to handle these variations.
Sponsored by: The FreeBSD Foundation
Only 'installworld' needs to be protected and only when not using
-DNO_ROOT, which implies not installing to / and not needing the
lib dependency protections.
Sponsored by: EMC / Isilon Storage Division
and kernel are staged before invoking the 'create-<foo>-packages'
targets.
Include PKG_VERSION value in the 'create-{world,kernel}-packages'
targets so the value is not redefined when packaging the kernel,
which otherwise results in inconsistent and confusing package
version results.
Sponsored by: The FreeBSD Foundation
with -DNO_ROOT to create the METALOG mtree(8) file.
Separate the default STAGEDIR for world (WSTAGEDIR) and kernel
(KSTAGEDIR).
Fix the 'create-kernel-packages' target to work properly.
Evaluate if 'kernel' is set when invoking mtree-to-plist.awk,
which splits the kernel and kernel.debug into separate plist
files.
Fix METALOG creation when building/packaging multiple kernels.
Sponsored by: The FreeBSD Foundation
to pkg(8) commands.
Move the resulting packages outside STAGEDIR to minimize
pollution.
When invoking 'pkg create', include the ABI in the REPODIR
path so the correct hierarchy is created for cross-builds.
Move the STAGEDIR and REPODIR declarations above the targets
that use them to keep things cleaner, and move the packages
target.
Include '-o ABIFILE=DESTDIR/bin/sh' in pkg(8) invocations in
the create-kernel-packages target.
Sponsored by: The FreeBSD Foundation