Commit Graph

41 Commits

Author SHA1 Message Date
Brooks Davis
4204224162 Finish removing FDDI and tokenring media support.
This fixes media display for 802.11 wireless devices.

Software outside the base system that uses these media types and
defines should use #ifdef IFM_FDDI or IFM_TOKEN to include or remove
support.

Reported by:	zeising
Reviewed by:	emaste, kib, zeising
Tested by:	zeising
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D15170
2018-04-23 21:10:33 +00:00
Brooks Davis
eec02418d8 Remove support for FDDI and token ring media types in userland utilities.
Reviewed by:	kib
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D15077
2018-04-16 18:07:51 +00:00
Brooks Davis
0437c8e3b1 Remove support for FDDI networks.
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).

Reviewed by:	kib, jhb
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D15017
2018-04-11 17:28:24 +00:00
Pedro F. Giffuni
df57947f08 spdx: initial adoption of licensing ID tags.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes:	yes
Differential Revision:	https://reviews.freebsd.org/D13133
2017-11-18 14:26:50 +00:00
Alan Somers
a80379c6d9 Fix a comment that's been wrong ever since this file was imported in 1997 2017-05-01 01:42:26 +00:00
Don Lewis
c871174916 Use strlcpy() instead of strncpy() when copying ifname to ensure
that it is NUL terminated.  Additional NUL padding is not required
for short names.

Use sizeof(destination) in a few places instead of IFNAMSIZ.

Cast afp->af_ridreq and afp->af_addreq  to make the intent of
the code more obvious.

Reported by:	Coverity
CID:		1009628, 1009630, 1009631, 1009632, 1009633, 1009635, 1009638
CID:		1009639, 1009640, 1009641, 1009642, 1009643, 1009644, 1009645
CID:		1009646, 1009647, 1010049, 1010050, 1010051, 1010052, 1010053
CID:		1010054, 1011293, 1011294, 1011295, 1011296, 1011297, 1011298
CID:		1011299, 1305821, 1351720, 1351721
MFC after:	1 week
2016-05-16 00:25:24 +00:00
Enji Cooper
abd7105060 Replace N #defines with nitems to simplify ifconfig code slightly
MFC after: 1 week
2015-09-27 07:51:18 +00:00
Eric Joyner
eb7e25b22f ifmedia changes:
- Extend the number of available subtypes for Ethernet media by using some
of the ifmedia word's option bits to help denote subtypes. As a result, the
number of possible Ethernet subtype values increases from 31 to 511.

- Use some of those new values to define new media types.

- lacp_compose_key() recgonizes the new Ethernet media types added.
  (Change made as required by a comment in if_media.h)

- New ioctl, SIOGIFXMEDIA, to handle getting the new extended media types.
  SIOCGIFMEDIA is retained for backwards compatibility.

- Changes to ifconfig to allow it to handle the new extended media types.

Submitted by:	mike@karels.net (original), hselasky
Reviewed by:	jfvogel, gnn, hselasky
Approved by:	jfvogel (mentor), gnn (mentor)
Differential Revision: http://reviews.freebsd.org/D1965
2015-04-07 21:31:17 +00:00
Marius Strobl
6f135a7584 When setting media always and not just in case of switching to IFM_AUTO
clear the options of the current media, i.e. only inherit the instance,
which matches what NetBSD does. Without this it's really non-intuitive
that the following sequence:
	ifconfig bge0 media 1000baseT mediaopt full-duplex
	ifconfig bge0 media 100baseTX
results in 100baseTX full-duplex to be set or that:
	ifconfig bge0 media autoselect mediaopt flowcontrol
	ifconfig bge0 media 1000baseT mediaopt full-duplex
tries to set 1000baseT full-duplex with flowcontrol, which isn't suported
und thus fails while the following:
	ifconfig re0 media 1000baseT mediaopt flowcontrol,full-duplex
	ifconfig re0 media autoselect
just switches to autoselection without flowcontrol.

MFC after:	2 weeks
2011-05-15 12:51:00 +00:00
Marius Strobl
a0fc3825c3 Teach ifconfig(8) the handy shared option shortcut aliases the NetBSD
counterpart also takes, i.e. "fdx" for "full-duplex", "flow" for
"flowcontrol", "hdx" for "half-duplex" as well as "loop" and "loopback"
for "hw-loopback".

MFC after:	1 week
2011-01-05 15:28:30 +00:00
Joel Dahl
f041f6a7b7 Remove the advertising clause from UCB copyrighted files in sbin. This
is in accordance with the information at
ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change
2010-12-12 21:26:12 +00:00
Marius Strobl
8d88402858 When setting a media with no sub-type specified also reset the type
specific options along with the global ones so these options don't
stick when f.e. switching to IFM_AUTO.

MFC after:	2 weeks
2010-11-13 22:40:37 +00:00
Marius Strobl
a84e1b3b24 When printing media with more than one media option set aggregate these
in a comma delimited list instead of repeating "mediaopt" for each one.
This matches how the options of the active media are printed with
print_media_word() and brings us in line what NetBSD does.

MFC after:	2 weeks
2010-11-13 21:03:19 +00:00
Rui Paulo
59aa14a91d Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.

Authentication and encryption are not implemented.

There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).

A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.

Drivers that support mesh networks right now are: ath, ral and mwl.

More information at: http://wiki.freebsd.org/WifiMesh

Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.

Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.

Reviewed by:	sam
Approved by:	re (kensmith)
Obtained from:	projects/mesh11s
2009-07-11 15:02:45 +00:00
Xin LI
b59dcaeeb3 - Use size_t instead of int when appropriate;
- Use C99 sparse initialization.

With these changes ifconfig(8) is WARNS=2 clean.
2009-06-23 23:49:52 +00:00
Sam Leffler
b032f27c36 Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00
Sam Leffler
8f3591a5bb Update for revised 802.11 support:
o revised channel handling support; ifconfig now queries the kernel to
  find the list of available channels and handles channel promotion;
  channel attributes can be specified as part of the channel; e.g. 36:a
  for channel 36 in 11a (as opposed to turbo A or HT A)
o use channel list to map between freq and IEEE channel #; this eliminates
  all knowledge of how the mapping is done and fixes handling of cases
  where channels overlap in the IEEE channel # space but are distinct in
  the frequency+attributes space (e.g. PSB)
o add new knobs: bgscan, ff (Atheors fast frames), dturbo (Atheros
  Dynamic Turbo mode), bgscanidle, bgscanintvl, scanvalid, roam:rssi11a,
  roam:rssi11b, roam:rssi11g, roam:rate11a, roam:rate11b, roam:rate11g
  (roaming parameters), burst, doth (forthcoming 11h support)
o print contents of WME, ATH, WPA, RSN, information elements with -v option
o print signal strength in dBm
o print noise floor in dBm
o add list txpow to print tx power caps/channel
o change default channel display in status to be more informative
2007-06-11 03:56:33 +00:00
Marius Strobl
98b0eedaf5 Actually fully emulate NetBSD and print the media instance number
only for non-zero instances so the typical output for IFM_IEEE80211
type media doesn't overflow 80 columns.

Requested by:	sam
2007-01-22 13:42:07 +00:00
Marius Strobl
1113949379 - Display the media instance numbers and allow the user to set the active
one. This is based on NetBSD but unlike NetBSD this implementation prints
  the instance number for all media instances and doesn't skip it for the
  first one as I don't see a reason to suppress it except for the vague
  reason to preserve the output for single-instance configurations.
- Fix some whitespace nits.
2007-01-20 00:56:49 +00:00
Jung-uk Kim
f7c6b0a8c6 Clear full-duplex when half-duplex flag is set. This actually makes
'mediaopt half-duplex' working as it should.  It is now equivalent of
'-mediaopt full-duplex'.
2006-12-19 22:50:49 +00:00
Thomas Quinot
68e160886a (media_status): Factor common code between IFM_ETHER and IFM_ATM cases.
(print_media_word, print_media_word_ifconfig): Remove unnecessary
goto following test for null desc.

PR:		bin/102354
Submitted by:	Ricardo Nabinger Sanchez <rnsanchez@gmail.com>
MFC after:	1 week
2006-08-22 23:49:36 +00:00
Doug Ambrisko
1cc59a99c0 Grab the media from the passed in structure to put it into the
global structure.

PR:	bin/91399
Submitted by:	Spencer Minear
2006-01-11 22:37:59 +00:00
Doug Ambrisko
499e862cae Change the ifr_media operation to only get its value and only set
its value once per ifconfig run.  Use Sam's new callback
operation to set it when everything is done.

The purpose for this is that if you did something like
	ifconfig bge0 media 100baseTX mediaopt full-duplex
multiple times it would end up causing the PHY to re-sync
since it would send the IOCTLs:
	ifconfig bge0 media 100baseTX -mediaopt full-duplex
	ifconfig bge0 media 100baseTX mediaopt full-duplex
This would cause the PHY to be updated twice even though
there really wasn't any change since the check in
sys/net/if_media.c would always fail.

Caveat is that this doesn't fix the case of:
	ifconfig bge0 media autoselect
etc. since in sys/net/if_media.c it forces an autoselect to go through
the entire process in ifmedia_ioctl :-( :
          /*
           * If no change, we're done.
           * XXX Automedia may invole software intervention.
           *     Keep going in case the the connected media changed.
           *     Similarly, if best match changed (kernel debugger?).
           */
           if ((IFM_SUBTYPE(newmedia) != IFM_AUTO) &&
                (newmedia == ifm->ifm_media) &&
                (match == ifm->ifm_cur))
                     return 0;

Briefly looked at by:	sam
2005-01-27 16:40:12 +00:00
Sam Leffler
90c4b74cbe Fix special status reporting. Prior to the reorg there was
special-purpose code to display status for an interface for
state that was not address-oriented.  This status reporting
was merged in to the address-oriented status reporting but
did not work for link address reporting (as discovered with
fwip interfaces).  Correct this mis-merge and eliminate the
bogus kludge that was used for link-level address reporting.

o add an af_other_status method for an address family for
  reporting status of things like media, vlan, etc.
o call the af_other_status methods after reporting address
  status for an interface
o special-case link address status; when reporting all
  status for an interface invoke it specially prior to
  reporting af_other_status methods (since it requires the
  sockaddr_dl that is passed in to status separately from
  the rtmsg address state)
o correct the calling convention for link address status;
  don't cast types, construct the proper parameter

This fixes ifconfig on fwip interfaces.
2004-12-31 19:46:27 +00:00
Sam Leffler
5faf8dcb55 Overhaul to cleanup some of the tangled logic that's grown over the years.
o break per-address family support out into separate files
o modularize per-address family and functional operations using
  a registration mechanism; this permits configuration according
  to which files you include (but beware that order of the files
  is important to insure backwards compatibility)
o many cleanups to eliminate incestuous behaviour, global variables,
  and poor coding practices (still much more to fix)

The original motivation of this work was to support dynamic addition
of functionality based on the interface so we can eliminate the various
little control programs and so that vendors can distribute ifconfig
plugins that support their in-kernel code.  That work is still to be
completed.

o Update 802.11 support for all the new net80211 functionality; some
  of these operations (e.g. list *) may be better suited in a different
  program
2004-12-08 19:18:07 +00:00
Sam Leffler
fbc5a4076e 802.11 mode bits are now masks; convert to suit 2004-01-15 15:19:19 +00:00
Sam Leffler
2559c28876 o correct mode request handling
o add 802.11 alias support
o suppress display of the default "mode autoselect" when showing the "phy mode"
2003-06-25 15:05:17 +00:00
Hartmut Brandt
2b75e097f1 Add media types and options for ATM. While on most ATM cards media cannot
be changed, it is very convenient to be able to toggle SDH/Sonet,
idle/unassigned cells and scrambled mode and to see the carrier
state.

Reviewed by:	-arch (if_media.h definitions)
2003-04-29 17:23:23 +00:00
Sam Leffler
4e61f6f1f6 add a "mode" directive to specify the operating mode for multi-mode devices;
this is mostly intended for use with multi-mode 802.11 devices that support
some combination of 11a, 11b, and 11g
2003-04-28 16:37:38 +00:00
Warner Losh
bc123897ed De-__P, use ansi function definitions 2002-04-18 17:14:09 +00:00
Jeroen Ruigrok van der Werven
a72945b799 Back out previous commit.
This works for wi(4), but apparantly other wireless drivers seem to do
the right thing.

Submitter and yours truly both got Mislead(tm).

Submitted by:	udp <udp@sneakerz.org>
2001-11-15 16:55:39 +00:00
Jeroen Ruigrok van der Werven
aabb3df7da Report ad hoc mode correctly.
Submitted by:	udp <udp@sneakerz.org>
2001-11-15 15:31:51 +00:00
Yaroslav Tykhiy
f23badd91d Cosmetic: Don't output a blank line if a driver provides
no media status.

PR:		bin/30587
Submitted by:	Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
MFC after:	1 week
2001-11-02 02:20:21 +00:00
Poul-Henning Kamp
ca299b1fc0 When using interfaces that support if_media, the supported media list is
printed on a single, very long, and generally unreadable line.  This
isn't very useful.  It's also really ugly and most of the time you don't
care what media is supported anyway.

PR:		27701
Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
2001-05-29 09:13:44 +00:00
Poul-Henning Kamp
419d8080a4 Currently, each wireless networking driver has it's own control program
despite the fact that most people want to set exactly the same settings
regardless of which card they have.  It has been repeatidly suggested
that this configuration should be done via ifconfig.  This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers.  It also provides partial, untested support for the
awi driver.

PR:		25577
Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
2001-05-26 09:27:08 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Bruce Evans
cc03533c8d Removed most unused includes of <net/if_var.h> outside the kernel. 1998-01-16 17:38:56 +00:00
Peter Wemm
41cd75b799 Make the supported media info output the default.
The -m switch is now accepted for backwards compatability.

Suggested by: davidg
1997-10-16 03:55:29 +00:00
Peter Wemm
c514950585 Clean up some more. Move parsing of sysctl iflist data into a single
place rather than updating the main loop's index variables from within
a subroutine and other revolting things like that.  Move some more
globals into local variables.
1997-05-10 17:14:53 +00:00
Peter Wemm
eca42d3ce0 Grumble.. My last patchup here didn't quite work either. I hate this
program and it's use of global variables.  Somehow, I managed to miss the
most obvious case.. "ifconfig ed0 10.0.0.1" failed (no "inet")

Submitted by: dfr
1997-05-10 14:47:35 +00:00
Peter Wemm
4edfe6b992 Bring in the ifmedia components of NetBSD's ifconfig as a seperate file.
Obtained from: Jason Thorpe via NetBSD
1997-05-04 06:22:27 +00:00