historical relic, and are no longer appropriate for either LAN or WAN
mounting. At modern (gigabit and 10 gigabit) LAN speeds packet loss
from socket buffer fill events is common, and sequence numbers wrap
quickly enough that data corruption is possible. TCP solves both of
these problems without imposing significant overhead.
MFC after: 1 month
Add a MULTIPLE INSTANCES section which provides an example of
setting up natd in multi-instance mode (based on the notes.natd
file from phk@).
Submitted by: "Andrey V. Elsukov" <bu7cher@yandex.ru>
Reviewed by: ru
process parallel checks in the same way as fsck, since fsck supports
pass numbers other than 0, 1 or 2. Without this, quotacheck would
ignore file systems with pass numbers > 2.
The -l (maxrun) option is now deprecated and can be tuned with pass
numbers in /etc/fstab if needed.
exposing them to all consumers of ip_fw.h. These structures are
used in both ipfw(8) and ipfw(4), but not part of the user<->kernel
interface for other applications to use, rather, shared
implementation.
MFC after: 3 days
Reported by: Paul Vixie <paul at vix dot com>
on a filesystem if the quota data files reside on a different
filesystem (e.g. the userquota=/somepath,groupquota=/somepath2
options are specified in /etc/fstab to place the quota files
somewhere other than the default location).
Fix quotacheck to only skip accounting if the quota data file
actually resides on the filesystem being checked.
rather than the memcmp() which is used for regular dumps: the
textdump string is one character shorter, so we need to stop
comparing at the end of the string.
Use independent version checking logic for architecture-specific
version number vs. textdump version number, as the version sequences
may (someday) differ.
Run into by: rrs
managed from userspace. It is largely a wrapper for sysctl()
calls, but because the sysctls for adding and removing scripts
are awkward to use directly, this provides an easier-to-use
interface.
MFC after: 3 months
Implement -E option which will erase the filesystem sectors before
making the new filesystem. Reserved space in front of the superblock
(bootcode) is not erased.
NB: Erasing can take as long time as writing every sector sequentially.
This is relevant for all flash based disks which use wearlevelling.
section (if nothing had been specified, or if the auto type had
been specified, a default layout is used).
PR: docs/116047
Submitted by: Ian Smith <smithi at nimnet dot asn dot au>
Minor modifications by me.
return -1 on error while any other return value from it can
indicate success. (See RETURN VALUE in our ioctl(2) manpage
and the POSIX spec.)
- Avoid assumptions about the state of the data buffer after
ioctl(2) failure.
Add a new option to newfs(8), -r, to specify reserved space at the
end of the device. It can be useful, e.g., when the device is to
become a member of a gmirror array later w/o losing the file system
on it.
Document the new option in the manpage.
While I'm here, improve error handling for -s option, which is
syntactically similar to -r; and document the fact that -s0 selects
the default fs size explicitly, which can be useful, e.g., in a
menu-based wrapper around newfs(8) requiring some value be entered
for the fs size.
Also fix a small typo in the help line for -s (missing space).
Idea and initial implementation by: marck
Discussed on: -fs
Critical review by: bde
Tested with: cmp(1)
- refer to the dummynet(4) man page only once, later use rather
the .Nm macro.
- use .Va macro when refering to the sysctl variables
- grammar and markup fixes
Reviewed by: keramida, trhodes, ru (roughly)
MFC-after: 1 week
If it is set to zero value (default) dummynet module will try to emulate
real link as close as possible (bandwidth & latency): packet will not leave
pipe faster than it should be on real link with given bandwidth.
(This is original behaviour of dummynet which was altered in previous commit)
If it is set to non-zero value only bandwidth is enforced: packet's latency
can be lower comparing to real link with given bandwidth.
- Document recently introduced dummynet(4) sysctl variables.
Requested by: luigi, julian
MFC after: 3 month
with ACCESSPERMS. Document in mount_ntfs(8) only the nine
low-order bits of mask are used (taken from mount_msdosfs(8)).
PR: kern/114856
Submitted by: Ighighi
MFC after: 1 month
interface. Once the limit is reached packets with unknown source addresses are
dropped until an existing host cache entry expires or is removed. Useful to
use with the STICKY cache option.
Sponsored by: miniSuperHappyDevHouse NZ
a valid PMBR. Without this fix, if label a disk with a GPT, then relabel
it with an MBR the GPT tables are still present. If you then try to create
a GPT with 'gpt create', gpt(8) will fail to open the device because the
partitions in the stale GPT overlap with the slices in the MBR.
MFC after: 1 week
disk devices have to consist of a block of sectors. Thus, when writing
gptboot to the boot partition, round the size of the gptboot file up to a
sector boundary, pre-zero it, and write out the full buffer to disk.
command would add incorrect routing entries if network numbers weren't
fully "spelled" out according to their class. For example:
# route add 128.0/16 (works)
# route add 128/16 (doesn't work)
# route add 193.0.0/24 (works)
# route add 193/24 (doesn't work)
Also, rework the way a netmask is deduced from network number if
it [netmask] is not specified.
Submitted by: Nuno Antunes <nuno.antunes@gmail.com> (mostly)
MFC after: 1 week
on i386 and amd64 machines. The overall process is that /boot/pmbr lives
in the PMBR (similar to /boot/mbr for MBR disks) and is responsible for
locating and loading /boot/gptboot. /boot/gptboot is similar to /boot/boot
except that it groks GPT rather than MBR + bsdlabel. Unlike /boot/boot,
/boot/gptboot lives in its own dedicated GPT partition with a new
"FreeBSD boot" type. This partition does not have a fixed size in that
/boot/pmbr will load the entire partition into the lower 640k. However,
it is limited in that it can only be 545k. That's still a lot better than
the current 7.5k limit for boot2 on MBR. gptboot mostly acts just like
boot2 in that it reads /boot.config and loads up /boot/loader. Some more
details:
- Include uuid_equal() and uuid_is_nil() in libstand.
- Add a new 'boot' command to gpt(8) which makes a GPT disk bootable using
/boot/pmbr and /boot/gptboot. Note that the disk must have some free
space for the boot partition.
- This required exposing the backend of the 'add' function as a
gpt_add_part() function to the rest of gpt(8). 'boot' uses this to
create a boot partition if needed.
- Don't cripple cgbase() in the UFS boot code for /boot/gptboot so that
it can handle a filesystem > 1.5 TB.
- /boot/gptboot has a simple loader (gptldr) that doesn't do any I/O
unlike boot1 since /boot/pmbr loads all of gptboot up front. The
C portion of gptboot (gptboot.c) has been repocopied from boot2.c.
The primary changes are to parse the GPT to find a root filesystem
and to use 64-bit disk addresses. Currently gptboot assumes that the
first UFS partition on the disk is the / filesystem, but this algorithm
will likely be improved in the future.
- Teach the biosdisk driver in /boot/loader to understand GPT tables.
GPT partitions are identified as 'disk0pX:' (e.g. disk0p2:) which is
similar to the /dev names the kernel uses (e.g. /dev/ad0p2).
- Add a new "freebsd-boot" alias to g_part() for the new boot UUID.
MFC after: 1 month
Discussed with: marcel (some things might still change, but am committing
what I have so far)
for kldstat(2).
This allows libdtrace to determine the exact file from which
a kernel module was loaded without having to guess.
The kldstat(2) API is versioned with the size of the
kld_file_stat structure, so this change creates version 2.
Add the pathname to the verbose output of kldstat(8) too.
MFC: 3 days
(it is established practice) and ``-o whiteout=whenneeded'' is less
disk-space using mode especially for resource restricted environments
like embedded environments. (Contributed by Ed Schouten. Thanks)
Submitted by: Masanori Ozawa <ozawa@ongs.co.jp> (unionfs developer)
Reviewed by: jeff, kensmith
Approved by: re (kensmith)
MFC after: 1 week
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
