Before r207410, the hold count of a page in a page queue was protected
by the queue lock, and, before laundering a page, the page daemon
removed managed writeable mappings of the page before releasing the
queue lock. This ensured that other threads could not concurrently
create transient writeable mappings using pmap_extract_and_hold() on a
user map, as is done for example by vmapbuf(). With that revision,
however, a race can allow the creation of such a mapping, meaning that
the page might be modified as it is being laundered, potentially
resulting in it being marked clean when its contents do not match
those given to the pager. Close the race by using the page lock to
synchronize the hold count check in vm_pageout_cluster() with the
removal of writeable managed mappings.
Reported by: alc
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12084
Decouple the pageout cluster size from the size of the hash table entry
used by the swap pager for mapping (object, pindex) to a block on the
swap device(s), and keep the size of a hash table entry at its current
size.
Eliminate a pointless macro.
Reviewed by: kib, markj (an earlier version)
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D11305
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
A comment near kmem_reclaim() implies that we already did that.
Calling the hook is useful, because some handlers, e.g. ARC,
might be able to release significant amounts of KVA.
Now that we have more than one place where vm_lowmem hook is called,
use this change as an opportunity to introduce flags that describe
a reason for calling the hook. No handler makes use of the flags yet.
Reviewed by: markj, kib
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9764
There could be a race between the vm daemon setting RACCT_RSS based on
the vm space and vmspace_exit (called from exit1) resetting RACCT_RSS to
zero. In that case we can get a zombie process with non-zero RACCT_RSS.
If the process is jailed, that may break accounting for the jail.
There could be other consequences.
Fix this race in the vm daemon by updating RACCT_RSS only when a process
is in the normal state. Also, make accounting a little bit more
accurate by refreshing the page resident count after calling
vm_pageout_map_deactivate_pages().
Finally, add an assert that the RSS is zero when a process is reaped.
PR: 210315
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D9464
On systems without a configured swap device, an attempt to launder pages
from a swap object will always fail and result in the page being
reactivated. This means that the page daemon will continuously scan pages
that can never be evicted. With this change, anonymous pages are instead
moved to PQ_UNSWAPPABLE after a failed laundering attempt when no swap
devices are configured. PQ_UNSWAPPABLE is not scanned unless a swap device
is configured, so unreferenced unswappable pages are excluded from the page
daemon's workload.
Reviewed by: alc
The swap pager enqueues laundered pages near the head of the inactive queue
to avoid another trip through LRU before reclamation. This change adds
support for this behaviour to the vnode pager and makes use of it in UFS and
ext2fs. Some ioflag handling is consolidated into a common subroutine so
that this support can be easily extended to other filesystems which make use
of the buffer cache. No changes are needed for ZFS since its putpages
routine always undirties the pages before returning, and the laundry
thread requeues the pages appropriately in this case.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D8589
pages, specificially, dirty pages that have passed once through the inactive
queue. A new, dedicated thread is responsible for both deciding when to
launder pages and actually laundering them. The new policy uses the
relative sizes of the inactive and laundry queues to determine whether to
launder pages at a given point in time. In general, this leads to more
intelligent swapping behavior, since the laundry thread will avoid pageouts
when the marginal benefit of doing so is low. Previously, without a
dedicated queue for dirty pages, the page daemon didn't have the information
to determine whether pageout provides any benefit to the system. Thus, the
previous policy often resulted in small but steadily increasing amounts of
swap usage when the system is under memory pressure, even when the inactive
queue consisted mostly of clean pages. This change addresses that issue,
and also paves the way for some future virtual memory system improvements by
removing the last source of object-cached clean pages, i.e., PG_CACHE pages.
The new laundry thread sleeps while waiting for a request from the page
daemon thread(s). A request is raised by setting the variable
vm_laundry_request and waking the laundry thread. We request launderings
for two reasons: to try and balance the inactive and laundry queue sizes
("background laundering"), and to quickly make up for a shortage of free
pages and clean inactive pages ("shortfall laundering"). When background
laundering is requested, the laundry thread computes the number of page
daemon wakeups that have taken place since the last laundering. If this
number is large enough relative to the ratio of the laundry and (global)
inactive queue sizes, we will launder vm_background_launder_target pages at
vm_background_launder_rate KB/s. Otherwise, the laundry thread goes back
to sleep without doing any work. When scanning the laundry queue during
background laundering, reactivated pages are counted towards the laundry
thread's target.
In contrast, shortfall laundering is requested when an inactive queue scan
fails to meet its target. In this case, the laundry thread attempts to
launder enough pages to meet v_free_target within 0.5s, which is the
inactive queue scan period.
A laundry request can be latched while another is currently being
serviced. In particular, a shortfall request will immediately preempt a
background laundering.
This change also redefines the meaning of vm_cnt.v_reactivated and removes
the functions vm_page_cache() and vm_page_try_to_cache(). The new meaning
of vm_cnt.v_reactivated now better reflects its name. It represents the
number of inactive or laundry pages that are returned to the active queue
on account of a reference.
In collaboration with: markj
Reviewed by: kib
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8302
by vm_pageout_scan() local to vm_pageout_worker(). There is no reason
to store the pass in the NUMA domain structure.
Reviewed by: kib
MFC after: 3 weeks
target was met.
Previously, vm_pageout_worker() itself checked the length of the free page
queues to determine whether vm_pageout_scan(pass >= 1)'s inactive queue scan
freed enough pages to meet the free page target. Specifically,
vm_pageout_worker() used vm_paging_needed(). The trouble with
vm_paging_needed() is that it compares the length of the free page queues to
the wakeup threshold for the page daemon, which is much lower than the free
page target. Consequently, vm_pageout_worker() could conclude that the
inactive queue scan succeeded in meeting its free page target when in fact
it did not; and rather than immediately triggering an all-out laundering
pass over the inactive queue, vm_pageout_worker() would go back to sleep
waiting for the free page count to fall below the page daemon wakeup
threshold again, at which point it will perform another limited (pass == 1)
scan over the inactive queue.
Changing vm_pageout_worker() to use vm_page_count_target() instead of
vm_paging_needed() won't work because any page allocations that happen
concurrently with the inactive queue scan will result in the free page count
being below the target at the end of a successful scan. Instead, having
vm_pageout_scan() return a value indicating success or failure is the most
straightforward fix.
Reviewed by: kib, markj
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8111
In particular, fix factual, grammatical, and spelling errors in various
comments, and remove comments that are out of place in this function.
Reviewed by: kib, markj
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7410
to r254304, we had separate functions for reclamation and laundering
(vm_pageout_scan) versus updating usage information, i.e., "reference
bits", on active pages (vm_pageout_page_stats), and we only performed
vm_req_vmdaemon(VM_SWAP_IDLE) if vm_pages_needed was true. However, since
r254303, if vm_swap_idle_enabled was "1", we have performed
vm_req_vmdaemon(VM_SWAP_IDLE) regardless of whether we are short of free
pages. This was unintended and too aggressive, so I suspect no one uses
this feature. With this change, we restore the historical behavior and
only perform vm_req_vmdaemon(VM_SWAP_IDLE) when we are short of free
pages.
Reviewed by: kib, markj
It's a threshold for v_free_count, which is of type u_int. This also lets
us get rid of a cast in vm_paging_needed().
Reviewed by: alc
MFC after: 1 week
There is an order between covered vnode lock and allproc_lock, which
is established by calling mountcheckdirs() while owning the covered
vnode lock. mountcheckdirs() iterates over the processes, protected by
allproc_lock. This order is needed and seems to be not avoidable.
On the other hand, various VM daemons also need to iterate over all
processes, and they lock and unlock user maps. Since unlock of the
user map may trigger processing of the deferred map entries, it causes
vnode locking to occur. Or, when vmspace is freed, dropping references
on the vnode-backed object also lock vnodes. We get reverted order
comparing with the mount/unmount order.
For VM daemons, there is no need to own allproc_lock while we operate
on vmspaces. If the process is held, it serves as the marker for
allproc list, which allows to continue the iteration.
Add _PHOLD_LITE() macro, similar to _PHOLD(), but not causing swap-in
of the kernel stacks. It is used instead of _PHOLD() in vm code,
since e.g. calling faultin() in OOM conditions only exaggerates the
problem.
Modernize comment describing PHOLD.
Reported by: lists@yamagi.org
Tested by: pho (previous version)
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 week
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D6679
indicate that threads are waiting for free pages to become available and
(2) to indicate whether a wakeup call has been sent to the page daemon.
The trouble is that a single flag cannot really serve both purposes, because
we have two distinct targets for when to wakeup threads waiting for free
pages versus when the page daemon has completed its work. In particular,
the flag will be cleared by vm_page_free() before the page daemon has met
its target, and this can lead to the OOM killer being invoked prematurely.
To address this problem, a new flag "vm_pageout_wanted" is introduced.
Discussed with: jeff
Reviewed by: kib, markj
Tested by: markj
Sponsored by: EMC / Isilon Storage Division
VM_NUMA_ALLOC is used to enable use of domain-aware memory allocation in
the virtual memory system. DEVICE_NUMA is used to enable affinity
reporting for devices such as bus_get_domain().
MAXMEMDOM must still be set to a value greater than for any NUMA support
to be effective. Note that 'cpuset -gd' always works if MAXMEMDOM is
enabled and the system supports NUMA.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5782
address and use this mechanism when:
1. kmem_alloc_{attr,contig}() can't find suitable free pages in the physical
memory allocator's free page lists. This replaces the long-standing
approach of scanning the inactive and inactive queues, converting clean
pages into PG_CACHED pages and laundering dirty pages. In contrast, the
new mechanism does not use PG_CACHED pages nor does it trigger a large
number of I/O operations.
2. on 32-bit MIPS processors, uma_small_alloc() and the pmap can't find
free pages in the physical memory allocator's free page lists that are
covered by the direct map. Tested by: adrian
3. ttm_bo_global_init() and ttm_vm_page_alloc_dma32() can't find suitable
free pages in the physical memory allocator's free page lists.
In the coming months, I expect that this new mechanism will be applied in
other places. For example, balloon drivers should use relocation to
minimize fragmentation of the guest physical address space.
Make vm_phys_alloc_contig() a little smarter (and more efficient in some
cases). Specifically, use vm_phys_segs[] earlier to avoid scanning free
page lists that can't possibly contain suitable pages.
Reviewed by: kib, markj
Glanced at: jhb
Discussed with: jeff
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4444
active queue scan initiated write.
Re-trying from the inactive queue when doing active scan makes the
loop never end if number of domains is greater than 1 and inactive or
active scan cannot reach the target.
Reported and tested by: Andrew Gallatin <gallatin@netflix.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
checks for the swap space consumption plus checks that the amount of
the free pages exceeds some limit, in case pagedeamon did not coped
with the page shortage in one of the late passes. This is wrong
because it does not account for the presence of the reclamaible pages
in the queues which are not selectable for reclaim immediately. E.g.,
on the swap-less systems, large active queue easily triggered OOM.
Instead, only raise OOM when pagedaemon is unable to produce a free
page in several back-to-back passes. Track the failed passes per
pagedaemon thread.
The number of passes to trigger OOM was selected empirically and
tested both on small (32M-64M i386 VM) and large (32G amd64)
configurations. If the specifics of the load require tuning, sysctl
vm.pageout_oom_seq sets the number of back-to-back passes which must
fail before OOM is raised. Each pass takes 1/2 of seconds. Less the
value, more sensible the pagedaemon is to the page shortage.
In future, some heuristic to calculate the value of the tunable might
be designed based on the system configuration and load. But before it
can be done, the i/o system must be fixed to reliably time-out
pagedaemon writes, even if waiting for the memory to proceed. Then,
code can account for the in-flight page-outs and postpone OOM until
all of them finished, which should reduce the need in tuning. Right
now, ignoring the in-flight writes and the counter allows to break
deadlocks due to write path doing sleepable memory allocations.
Reported by: Dmitry Sivachenko, bde, many others
Tested by: pho, bde, tuexen (arm)
Reviewed by: alc
Discussed with: bde, imp
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Residency count track the number of pte entries installed into the
current pmap, which does not reflect the consumption of the physical
memory by the address map. Due to several mechanisms like pv entries
reclamation, copy on write etc. the resident pte entries count may be
much less than the amount of physical memory kept by the process.
Provide the OOM-specific vm_pageout_oom_pagecount() function which
estimates the amount of reclamaible memory which could be stolen if
the process is killed.
Reported and tested by: pho
Reviewed by: alc
Comments text by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
other actions, swaps out kernel stacks of the processes. On the other
hand, currentl OOM logic which selects a process to kill in the
critical condition, skips process with swapped-out thread. Under some
loads, this results in the big(gest) process being ignored by OOM.
Do not skip a process which has inhibited thread due to the swap-out,
in the OOM selection loop. Note that killing such process requires
the thread stack page-in, but sometimes this is the only way to
recover.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
reclaimed in FIFO order by the pagedaemon. Previously we would enqueue
such pages at the head of the inactive queue, yielding a LIFO reclaim order.
Reviewed by: alc
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
in vm_pageout_fallback_object_lock() and vm_pageout_page_lock(). The
check for the m->queue == queue assumes that the page does belong to a
queue.
Modify the 'unchanged' calculation bu dereferencing the marker tailq
pointers, which is known to belong to the queue. Since for a page m
linked to the queue, m->queue must be equal to the queue index, assert
this instead of checking.
In collaboration with: alc
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 2 weeks
should not assume that vm_pages_needed will remain set while it sleeps.
Other threads can clear vm_pages_needed by performing a sufficient
number of vm_page_free() calls, e.g., process termination. The effect
of this error was that vm_pageout_worker() would free and/or launder
pages when, in fact, there was no shortage of free pages.
Rewrite a nearby comment to describe all of the possible cases and not
just the most common case. The problem being that the comment made
the most common case seem like the only case.
Reviewed by: kib
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
so that there is only one place where pages are freed and only one place
where pages are moved to the tail of the queue.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
pages will have left the inactive queue before the page daemon performs
its next scan. Also, ignore references to pages from terminated objects.
This allows the clean pages to be freed a little sooner.
Move some comments to their proper place, i.e., next to the code that
they describe, and update other nearby comments.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
it may involve a pmap operation that iterates over the page's PV list, so
unnecessarily holding the page lock is undesirable.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Currently vm_pageout_scan() uses a ticks-based scheme to rate-limit
the number of times that the vm_lowmem event will happen. However
if no events happen for long enough for ticks to roll over, this
leaves us in a long window in which vm_lowmem events will not
happen.
Replace the use of ticks with time_t to prevent rollover from ever
being an issue.
Reviewed by: ian
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3439
to vm_page_try_to_cache() from vm_pageout_flush(). Other changes, most
recently r286814, have made this call unnecessary.
Reviewed by: kib
Discussed with: jeff
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
However, I've observed the active queue scan stopping when there are
frequent free page shortages and the inactive queue is steadily refilled
by other mechanisms, such as the sequential access heuristic in vm_fault()
or madvise(2). To remedy this problem, record the time of the last active
queue scan, and always scan a number of pages proportional to the time
since the last scan, regardless of whether that last scan was a
timeout-triggered ("pass == 0") or free-page-shortage-triggered ("pass >
0") scan.
Also, on a timeout-triggered scan, allow a full scan of the active queue
when the system is short of inactive pages.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
they coould be dirty. Move the handling if the invalid pages in the
inactive scan earlier.
Remove some code duplication in the scan by introducing the
'drop_page' label, which centralizes the object and the page unlock.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
pages in vm_pageout_scan(). The reactivation rate of cache pages created
by vm_pageout_scan() is extremely low; typically no more than 0.5% to
2.25% of the pages are ever reactivated. At the same time, caching pages
is more expensive than freeing them. For example, in a test with
PostgreSQL, this change reduced the amount of time spent in the inactive
queue scan by 1/6.
Differential Revision: https://reviews.freebsd.org/D2805
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
