The bootindex option creates an entry in the "bootorder" fwcfg file.
This file can be picked up by the guest firmware to determine the
bootorder. Nevertheless, it's not guaranteed that the guest firmware
uses the bootorder. At the moment, our OVMF ignores the bootorder. This
will change in the future.
If guest firmware supports the "bootorder" fwcfg file and no device uses
the bootindex option, the boot order is determined by the firmware
itself. If one or more devices specify a bootindex, the first bootable
device with the lowest bootindex will be booted. It's not garanteed that
devices without a bootindex will be recognized as bootable from the
firmware in that case.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D39285
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Most of these arguments were unused. Device models which do need
access to the vmctx in one of these methods can obtain it from the
pi_vmctx member of the pci_devinst argument instead.
Reviewed by: corvink, markj
Differential Revision: https://reviews.freebsd.org/D38096
The ident string for NVMe and VirtIO block deivces do not contain the
bus, and the various fields can potentially use up to three characters
when printed as unsigned values (full range of uint8_t) even if not
likely in practice.
Reviewed by: corvink, chuck
Differential Revision: https://reviews.freebsd.org/D37488
This is easier to read and addresses some compiler warnings.
One might expect these tables to be read-only but it seems that the
snapshot/restore code may modify them.
MFC after: 2 weeks
Register a resize callback with the blockif interface. When the
callback fires, update the size of the disk and notify the guest via a
configuration change interrupt.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30506
The old prototype requires callers to inspect flags of each descriptors
to get the starting position of host-writable iovecs.
vq_getchain() is changed to return a virtio request with the number of
host-readable iovecs and host-writable iovecs instead. Callers can avoid
boilerplate code of getting the start offset of host-writable iovecs.
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Reviewed by: afedorov
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29433
Replace the existing ad-hoc configuration via various global variables
with a small database of key-value pairs. The database supports
heirarchical keys using a MIB-like syntax to name the path to a given
key. Values are always stored as strings. The API used to manage
configuation values does include wrappers to handling boolean values.
Other values use non-string types require parsing by consumers.
The configuration values are stored in a tree using nvlists. Leaf
nodes hold string values. Configuration values are permitted to
reference other configuration values using '%(name)'. This permits
constructing template configurations.
All existing command line arguments now set configuration values. For
devices, the "-s" option parses its option argument to generate a list
of key-value pairs for the given device.
A new '-o' command line option permits setting an individual
configuration variable. The key name is always given as a full path
of dot-separated components.
A new '-k' command line option parses a simple configuration file.
This configuration file holds a flat list of 'key=value' lines where
the 'key' is the full path of a configuration variable. Lines
starting with a '#' are comments.
In general, bhyve starts by parsing command line options in sequence
and applying those settings to configuration values. Once this is
complete, bhyve then begins initializing its state based on the
configuration values. This means that subsequent configuration
options or files may override or supplement previously given settings.
A special 'config.dump' configuration value can be set to true to help
debug configuration issues. When this value is set, bhyve will print
out the configuration variables as a flat list of 'key=value' lines.
Most command line argments map to a single configuration variable,
e.g. '-w' sets the 'x86.strictmsr' value to false. A few command
line arguments have less obvious effects:
- Multiple '-p' options append their values (as a comma-seperated
list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number).
- For '-s' options, a pci.<bus>.<slot>.<function> node is created.
The first argument to '-s' (the device type) is used as the value of
a "device" variable. Additional comma-separated arguments are then
parsed into 'key=value' pairs and used to set additional variables
under the device node. A PCI device emulation driver can provide
its own hook to override the parsing of the additonal '-s' arguments
after the device type.
After the configuration phase as completed, the init_pci hook
then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the
"device" value to find the device model to use. The device
model's init routine is passed a reference to its nvlist node
in the configuration tree which it can query for specific
variables.
The result is that a lot of the string parsing is removed from
the device models and centralized. In addition, adding a new
variable just requires teaching the model to look for the new
variable.
- For '-l' options, a similar model is used where the string is
parsed into values that are later read during initialization.
One key note here is that the serial ports use the commonly
used lowercase names from existing documentation and examples
(e.g. "lpc.com1") instead of the uppercase names previously
used internally in bhyve.
Reviewed by: grehan
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D26035
Definitions inside usr.sbin/bhyve/virtio.h are thrown away.
Definitions in sys/dev/virtio are used instead.
This reduces code duplication.
Sponsored by: The FreeBSD Foundation
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29084
If bhyve is used to emulate 512e access in guest OS, then discard addresses should be properly aligned.
Otherwise ioctl DIOCGDELETE fails for 512b requires on devices with 4K sector size.
see g_dev_ioctl() in sys/geom/geom_dev.c
Submitted by: Vitaliy Gusev <gusev.vitaliy@gmail.com>
MFC after: 1 week
Sponsored by: vStack.com
Differential Revision: https://reviews.freebsd.org/D27075
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
This will advertise support for TRIM to the guest virtio-blk driver and
perform the DIOCGDELETE ioctl on the backing storage if it supports it.
Thanks to Jason King and others at Joyent and illumos for expanding on
my original patch, adding improvements including better error handling
and making sure to following the virtio spec.
Submitted by: Jason King <jason.king@joyent.com> (improvements)
Reviewed by: jhb
Obtained from: illumos-joyent (improvements)
MFC after: 1 month
Relnotes: yes
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D21707
Add printf() wrapper to use CR/CRLF terminators depending on whether
stdio is mapped to a tty open in raw mode.
Try to use the wrapper everywhere.
For now we leave the custom DPRINTF/WPRINTF defined by device
models, but we may remove them in the future.
Reviewed by: grehan, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22657
Some of the printf statements only use LF to get a newline. However, a CR character is also required for the serial console to print debug logs in a nice way.
Fix those code locations that only use LF, by adding a CR character.
Reviewed by: markj, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22552
The Windows virtio driver ignores the advertized seg_max field and
assumes the host can accept up to 67 segments in indirect descriptors,
triggering an assert in the bhyve process.
This brings back r282922 but with a couple of changes:
- It raises the block interface segment limit to 128 instead of 67.
- Linux's virtio driver assumes that the segment limit is no
larger than the ring size. To avoid breaking Linux guests,
raise the VirtIO ring size to 128, and cap the VirtIO segment
limit at ring size - 2 (effectively 126).
Reviewed by: rgrimes, Patrick Mooney <pmooney@pfmooney.com>
Obtained from: Joyent (Linux workaround)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18831
to avoid buffer accessed out of bounds, also switch to snprintf(3).
PR: 200859
Submitted by: Caglar <caglar@10ur.org>
Obtained from: https://github.com/mist64/xhyve/pull/24
MFC after: 4 weeks
Sponsored by: iXsystems Inc.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
GEOM does not support scatter/gather lists in its I/Os. Such requests
are cut in pieces by physio(), that may be problematic, if those pieces
are not multiple of provider's sector size. If such case is detected,
move the data through temporary sequential buffer.
MFC after: 2 weeks
There are a number of assumptions about legacy interrupts always
being available in virtio so don't allow back-ends to make the
decision to support them.
This fixes the issue seen with virtio-rnd on OpenBSD. MSI-x vectors
were not being used, and the virtio-rnd backend wasn't allocating a
legacy interrupt resulting in a bhyve assert and guest exit.
Reported by: Julian Hsiao, madoka at nyanisore dot net
Reviewed by: neel
MFC after: 1 week
I/O interface.
Asynchronous operation, based on r280026 change, allows to not block virtual
CPU during I/O processing, that on slow/busy storage can take seconds.
Use of recently improved block I/O interface allows to process multiple
requests same time, that improves random I/O performance on wide storages.
Benchmarks of virtual disk, backed by ZVOL on RAID10 pool of 4 HDDs, show
~3.5 times random read performance improvements, while no degradation on
linear I/O. Guest CPU usage during test dropped from 100% to almost zero.
MFC after: 2 weeks
Original virtqueue design allows queued and out-of-order processing, but
helpers added in r253440 suppose only direct blocking in-order one.
It could be fine for network, etc., but it is a huge limitation for storage
devices.
Passing through physical block size/offset from underlying storage allows
guest to manage proper data and I/O alignment to improve performance.
MFC after: 2 weeks
This gets rid of the following error message during FreeBSD guest bootup:
"vtbd0: hard error cmd=flush fsbn 0"
Reported by: rodrigc
Reviewed by: grehan
the virtio backends.
- Add a new ioctl to export the count of pins on the I/O APIC from vmm
to the hypervisor.
- Use pins on the I/O APIC >= 16 for PCI interrupts leaving 0-15 for
ISA interrupts.
- Populate the MP Table with I/O interrupt entries for any PCI INTx
interrupts.
- Create a _PRT table under the PCI root bridge in ACPI to route any
PCI INTx interrupts appropriately.
- Track which INTx interrupts are in use per-slot so that functions
that share a slot attempt to distribute their INTx interrupts across
the four available pins.
- Implicitly mask INTx interrupts if either MSI or MSI-X is enabled
and when the INTx DIS bit is set in a function's PCI command register.
Either assert or deassert the associated I/O APIC pin when the
state of one of those conditions changes.
- Add INTx support to the virtio backends.
- Always advertise the MSI capability in the virtio backends.
Submitted by: neel (7)
Reviewed by: neel
MFC after: 2 weeks
- Use #defines for capability bits
- Export the VTBLK_F_BLK_SIZE capability
- Fix bug in calculating capacity: it is in
512-byte units, not the underlying sector size
This allows virtio-blk to have backing devices
with non 512-byte sector sizes e.g. /dev/cd0, and
4K-block harddrives.
Reviewed by: neel
MFC after: 3 days
- Allow a hostbridge to be created with AMD as a vendor.
This passes the OpenBSD check to allow the use of MSI
on a PCI bus.
- Enable the i/o interrupt section of the mptable, and
populate it with unity ISA mappings. This allows the
'legacy' IRQ mappings of the PCI serial port to be
set up. Delete unused print routine that was obscuring code.
- Use the '-W' option to enable virtio single-vector MSI
rather than an environment variable. Update the virtio
net/block drivers to query this flag when setting up
interrupts.: bhyverun.c
- Fix the arithmetic used to derive the century byte in
RTC CMOS, as well as encoding it in BCD.
Reviewed by: neel
MFC after: 3 days
annoying verbose boot error of the form
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
The ident returned by bhyve is a text string 'BHYVE-XXXX-XXXX', where
the X's are the first bytes of the md5 hash of the backing filename.
Reviewed by: neel
Approved by: re (gjb)