release/Makefile.inc1 has git executions that were being ran for each of
these lookups. The results were not needed so just lookup what we want
directly instead.
Reviewed by: gjb, rlibby, emaste (maybe)
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27643
As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
I got annoyed by the number of warnings that the CheriBSD build was
emitting. It turns out that we are emitting lots of warnings during
bootstrap because bootstrap tools are built with the default compiler
flags and ignore the warnings flags that are set in bsd.sys.mk.
Looking at git blame, it appears that MK_WARNS=no has been passed since
rS112869, replacing the -DNO_WERROR option that was added in rS87775.
This commit changes MK_WARNS=no back to -DNO_WERROR. We need to pass
-DNO_WERROR, since the system compiler might have new warnings that we
don't know about yet, and we shouldn't fail the build in that case.
Reviewed By: imp, brooks
Differential Revision: https://reviews.freebsd.org/D27598
Having this as part of the bootstrap tools is useful to build disk images
to boot in QEMU (especially when building on a Linux/macOS host where
mkimg is not available). We have been bootstrapping mkimg in CheriBSD for
a long time (using LOCAL_XTOOL_DIRS) but I believe this is also useful
upstream.
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D27602
Only keep the widechar version of ncurses as libncursesw.so.9
Keep the old name to avoid breaking the ABI compatibility (the non
widechar version libncurses.so.9 is not binary compatible with
libncursesw.so.9) since all ports and base are already only linking
against the widechar version we can simply remove libncurses.so.9
Since the .9 version only lived in the dev branch and never ended in a
release, it is simply removed and not added to any binary compat
package.
Add symlinks to keep build time compatibility for anyone linking against
-lncurses
this way, it'll be automatically picked up by poudriere
That's quite handy when building pkgbase!
Submitted by: Mina Galić <me@igalic.co>
Reviewed By: bapt, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27690
While porting over the local changes from CheriBSD for upstreaming, I
accidentally committed a broken version of find_entry_point(): we have to
return NULL if the value is not found instead of a value with
ep->name == NULL, since the checks in main were changed to check ep instead
of ep->name for NULL.
This only matters if the crunched tool cannot be found using normal lookup
and one of the fallback paths is used, so it's unlikely to be triggered
in rescue. However, I noticed that one of our CheriBSD test scripts was
failing to run commands under `su` on minimal disk images where all
binaries are hardlinks to a `cheribsdbox` tool generated with crunchgen.
This also updates the bootstrapping check in Makefile.inc1 to bootstrap
crunchgen up to the next version bump.
Reviewed By: kevans
Differential Revision: https://reviews.freebsd.org/D27474
Default KERNCONF for powerpc64le should be GENERIC64, and powerpcspe should
select MPC85XXSPE
Reviewed by: bdragon,emaste
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27257
automatically by tools via /etc/make.conf, so remind people (me) where
to find where it's set..
It would be nice for someone to document what DISTDIR is better than:
where the file for a distribution gets installed
This adds a new target update-packages which will create the new packages
compared to the last run.
This is how to use it:
At this point we cut a release
$ make buildworld ...
$ make buildkernel
$ make packages
There is now a PKG_VERSION directory with latest link pointing to it
Distribute the packages to server
$ something something that update the source tree
$ make buildworld ...
$ make buildkernel
$ make update-packages
You know have a PKG_VERSION directory in the REPODIR and latest link pointing to it.
In PKG_VERSION dir only the packages which differs from the latest run are
named PKG_VERSION, otherwise the old packages are there.
The process is :
Build the new packages in the PKG_VERSION directory
Compare the internal data with the PKG_VERSION_FROM version. The comparison is done
by checking the internal hash of the packages.
By default PKG_VERSION_FROM is set to what the latest link points to.
If the old and new version matches, we rm the new package and cp the old one.
Differential Revision: https://reviews.freebsd.org/D25984
libjail is pretty small, so it makes for a good proof of concept demonstrating
how a system library can be wrapped to create a loadable Lua module for flua.
* Introduce 3lua section for man pages
* Add libjail module
Reviewed by: kevans, manpages
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26080
It turns out that the majority of the test time for the mkimg tests isn't
mkimg itself but rather the use of jot and hexdump which can be quite slow
on emulated platforms such as QEMU.
On QEMU-RISC-V this reduces the time for `kyua test mkimg_test` from 655
seconds to 200. And for CheriBSD on QEMU-CHERI this saves 4-5 hours (25%
of the time for the entire testsuite!) since jot ends up triggering slow
functions inside the QEMU emulation a lot.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D26796
makesyscalls.lua (and indeed makesyscalls.sh) are both safe to be run in
parallel, so let's do it.
This is a trivial difference because runtime per-target is pretty small, but
I like seeing it run in parallel when my muscle memory types `make -sj4`.
Reviewed by: brooks, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26594
This is the initial set up for PowerPC64LE.
The current plan is for this arch to remain experimental for FreeBSD 13.
This started as a weekend learning project for me and kinda snowballed from
there.
(More to follow momentarily.)
Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399
Otherwise we get lots of warnings when building on Linux/macOS during
installworld:
Scanning /local/scratch/alr48/cheri/output/freebsd-x86/usr/share/certs/blacklisted for certificates...
install: invalid option -- 'U'
Try 'install --help' for more information.
install: invalid option -- 'U'
....
Reviewed By: kevans
Differential Revision: https://reviews.freebsd.org/D26481
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
Contrary to my belief, installworld is not sufficient for getting certs
installed into VM images. Promote the rehash to both installworld and
distributeworld (notably: not stageworld) and rehash the base distdir so we
end up with /etc/ssl/certs populated in the base dist archive. A future
commit will remove the rehash from bsdinstall, which doesn't really need to
happen if they're installed into base.txz.
While here, fix a minor typo: s/CERTCLTFLAGS/CERTCTLFLAGS/
MFC after: 1 week
This was originally introduced back in r360833, and subsequently reverted
because it was broken for -DNO_ROOT builds and it may not have been the
correct place for it.
While debatably this may still not be 'the correct place,' it's much cleaner
than scattering rehashes all throughout the tree. brooks has fixed the issue
with -DNO_ROOT by properly writing to the METALOG in r361397.
Do note that this is different than what was originally committed; brooks
had revisions in D24932 that made it actually use the revised unprivileged
mode and write to METALOG, along with being a little more friendly to
foreign crossbuilds and just using the certctl in-tree.
With this change, I believe we should now have a populated /etc/ssl/certs in
the VM images.
MFC after: 1 week
We currently set MK_MAN=no in $BSARGS so MK_MAN_UTILS will also be false
which means that the makewhatis symlink will not be created.
This change fixes the build when using both -DBUILD_WITH_STRICT_TMPPATH and
-DBOOTSTRAP_ALL_TOOLS.
Tested by: andrew
Differential Revision: https://reviews.freebsd.org/D16761
This allows use of the standard src.conf configuration for controlling
whether the tree is cleaned before build or not. The default is still
to clean.
Setting either NOCLEAN or NO_CLEAN will mention the new src.conf option.
NOCLEAN remains a .warning, while for now NO_CLEAN is .info.
Reviewed by: bdrewery (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22762
This should be noticeably faster due to fewer processes being forked and
also handles other flags such as -S or writing to METALOG.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D26039
The most awkward bit in this patch is the bootstrapping of m4:
We can't simply use the host version of m4 since that is not compatible
with the flags passed by lex (at least on macOS, possibly also on Linux).
Therefore we need to bootstrap m4, but lex needs m4 to build and m4 also
depends on lex (which needs m4 to generate any files). To work around this
cyclic dependency we can build a bootstrap version of m4 (with pre-generated
files) then use that to build the real m4.
This patch also changes the xz/unxz/dd tools to always use the host version
since the version in the source tree cannot easily be bootstrapped on macOS
or Linux.
Reviewed By: brooks, imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D25992
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
Although I can't reproduce it, others are seeing different lex/yacc
programs always regenerated after my change to copy rather than
symlink the files. The reported fix is to add '-p' to the copies.
Since it doesn't hurt, go head and add it, though the reasons for
this mattering remain at best obscure and poorly articulated.
Without this change the buildworld/buildkernel epilogue looks like this:
>>> World built in 249 seconds, sysctl: cannot stat /proc/sys/hw/ncpu: No such file or directory
ncpu: , make -j72.
Reviewed By: emaste, bdrewery
Differential Revision: https://reviews.freebsd.org/D26056
This ensure that running make install inside buildenv correctly includes
the METALOG flags when building with -DNO_ROOT.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D26038
upstream so Version.inc now only defines LLD_VERSION_STRING.
This breaks the WANT_LINKER_VERSION magic and might lead to us building
more than needed (e.g., for croos-tools).
Change the awk script to parse LLD_VERSION_STRING instead of LLD_VERSION,
which not only unbreaks the current situation but should also be backwards
compatible as dim points out.
PR: 248818
Reviewed by: emaste, dim (seems right and the way to go)
MFC after: 4 weeks
X-MFC before: 364284
Some of the scripts used for libdtrace invoke nawk instead of awk
(for example cddl/contrib/opensolaris/lib/libdtrace/common/mknames.sh).
When bootstrapping all tools, we get the nawk -> awk link while building
usr.bin/awk, but when linking/copying the dependencies from the host we
were only adding awk but not nawk.
This was silently generating invalid files when building libdtrace with
BUILD_WITH_STRICT_TMPPATH=1 since those scripts invoke nawk instead of
awk. In addition to adding the missing link this commit also adds
set -e to those scripts to catch errors like this in the future.
Reviewed By: markj, emaste
Differential Revision: https://reviews.freebsd.org/D26025
Since the make variable STRIP is already used for other purposes, this
uses STRIPBIN (which is also used for the same purpose by install(1).
This allows using LLVM objcopy to strip binaries instead of the in-tree
elftoolchain objcopy. We make use of this in CheriBSD since passing
binaries generated by our toolchain to elftoolchain strip sometimes results
in assertion failures.
This allows working around https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=248516
by specifying STRIPBIN=/path/to/llvm-strip
Obtained from: CheriBSD
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D25988
make copies instead.
There's too many times that we can't run the new binaries with old
libraries. Making the links when things are known to be 'safe' is a
nice optimization, but a copy of all the binaries is only 30MB, so
saving the copies at the cost of increased support when new symbols
are added and used as part of the bootstrap seems to be unwise.
There may be additional optimizations possible here, especially for
!FreeBSD hosts. However, that's beyond the scope of the problem I'm
trying to fix with make failing mid-way through an installworld across
change r363679. This optimization there caused us to run a new binary
with an old library once a new make was installed due to the symbolic
link. One could just copy make, but then other binaries fail as well,
so rather than play whack-a-mole, I opted to take us back to the old
way. Before r340157 or so we did copies (thogh of a lot fewer
artifacts), and we didn't have issues like this.
Reviewed by: arichards@
Differential Revision: https://reviews.freebsd.org/D25967
The output dir is set to ${REPODIR}/${PKG_ABI}/${PKG_VERSION} now.
Add the possibility to specify the last componant and set it by default
to ${PKG_VERSION} as before.
This is useful for tests and also for building packages with the same
PKG_VERSION provided to check differences.
libarchive uses the SOURCE_DATE_EPOCH env variable to set the date of file
in an archive, this is useful for reproducibility.
Add a variable name PKG_TIMESTAMP that take a epoch time and set SOURCE_DATE_EPOCH
to this. By default it is the current time so no changes here.
In lib/Makefile, we document the dependency with SUBDIR_DEPEND
For buildworld orchestration, just prebuild libregex if GOOGLETEST is
enabled. googletest will get built in a later pass.