shared uses of a resource are recorded on a sub-list hanging off
a main resource object on a main resource list;
without this change a shared resource (e.g. irq) is reported only
once by devinfo -r/-u;
with this change the resource is reported for each driver that
allocates it (which is even more than what vmstat -i -a reports).
Approved by: jhb (mentor)
the command set (only so long as the module is present):
o add db_command_register and db_command_unregister to add and remove
commands, respectively
o replace linker sets with SYSINIT's (and SYSUINIT's) that register
commands
o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table
for registering top-level commands, show operands, and show all operands,
respectively
While here also:
o sort command lists
o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases
for existing commands
o add "show all trace" as an alias for "show alltrace"
o add "show all locks" as an alias for "show alllocks"
Submitted by: Guillaume Ballet <gballet@gmail.com> (original version)
Reviewed by: jhb
MFC after: 1 month
for overlaps, but more importantly, it collapses adjacent free regions.
This is needed to cope with BIOSen that split up ports for system devices
(like IPMI controllers) across multiple system resource entries.
- Now that rman_manage_region() is not so dumb, remove extra logic in the
x86 nexus drivers to populate the IRQ rman that manually coalesced the
regions.
MFC after: 1 week
subdrivers to hook up.
It should probably be rewritten to implement a simple bus to which
the sub drivers attach using some kind of hint.
Until then, provide a couple of crutch functions with big warning
signs so it can survive the recent changes to struct resource.
The external part is still called 'struct resource' but the contents
is now visible to drivers etc. This makes it part of the device
driver ABI so it not be changed lightly. A comment to this effect
is in place.
The internal part is called 'struct resource_i' and contain its external
counterpart as one field.
Move the bus_space tag+handle into the external struct resource, this
removes the need for device drivers to even know about these fields
in order to use bus_space to access hardware. (More in following commit).
1. Copy a NULL-terminated string into a fixed-length buffer, and
2. copyout that buffer to userland,
we really ought to
0. Zero the entire buffer
first.
Security: FreeBSD-SA-05:08.kmem
instead of failing.
When looking for a region to allocate, we used to check to see if the
start address was < end. In the case where A..B is allocated already,
and one wants to allocate A..C (B < C), then this test would
improperly fail (which means we'd examine that region as a possible
one), and we'd return the region B+1..C+(B-A+1) rather than NULL.
Since C+(B-A+1) is necessarily larger than C (end argument), this is
incorrect behavior for rman_reserve_resource_bound().
The fix is to exclude those regions where r->r_start + count - 1 > end
rather than r->r_start > end. This bug has been in this code for a
very long time. I believe that all other tests against end are
correctly done.
This is why sio0 generated a message about interrupts not being
enabled properly for the device. When fdc had a bug that allocated
from 0x3f7 to 0x3fb, sio0 was then given 0x3fc-0x404 rather than the
0x3f8-0x3ff that it wanted. Now when fdc has the same bug, sio0 fails
to allocate its ports, which is the proper behavior. Since the probe
failed, we never saw the messed up resources reported.
I suspect that there are other places in the tree that have weird
looping or other odd work arounds to try to cope with the observed
weirdness this bug can introduce. These workarounds should be located
and eliminated.
Minor debug write fix to match the above test done as well.
'nice' by: mdodd
Sponsored by: timing solutions (http://www.timing.com/)
better check for 'adjacent'. The old code assumed that if two resources
were adjacent in the linked list that they were also adjacent range wise.
This is not true when a resource manager has to manage disparate regions.
For example, the current interrupt code on i386/amd64 will instruct
irq_rman to manage two disjoint regions: 0-1 and 3-15 for the non-APIC
case. If IRQs 1 and 3 were allocated and then released, the old code
would coalesce across the 1 to 3 boundary because the resources were
adjacent in the linked list thus adding 2 to the area of resources that
irq_rman managed as a side effect. The fix adds extra checks so that
adjacent unallocated resources are only merged with the resource being
freed if the start and end values of the resources also match up. The
patch also consolidates the checks for adjacent resources being allocated.
create an ABI that encodes offsets and sizes of structures into client
drivers. The functions isolate the ABI from changes to the resource
structure. Since these are used very rarely (once at startup), the
speed penalty will be down in the noise.
Also, add r_rid to the structure so that clients can save the 'rid' of
the resource in the struct resource, plus accessor functions. Future
additions to newbus will make use of this to present a simplified
interface for resource specification.
Approved by: re (jhb)
Reviewed by: jhb, jake
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.
Tested on: i386, alpha, sparc64
argument specifying the boundary for the resource allocation.
Use ulmin()/ulmax() instead of min()/max() in some places to correctly
deal with the u_long resource range specifications.
splhigh() before the mtx_unlock and tsleep(). The splhigh() was probably
correct in the original code using simplelocks but is not correct in
5.0-current.
Noticed by: Andrew Reiter <awr@FreeBSD.org>
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
macros which provide the same functionality and are a bit more
efficient, convert use of CIRCLEQ's in resource manager to TAILQ's.
Approved by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
