- Use AES_XTS_IV_LEN instead of the key length as the IV length.
- Use G_ELI_IVKEYLEN as the size of the zeroed iv[] array in
g_eli_crypto_cipher() to match geli_io().
PR: 261172
Reported by: Malcolm Matalka <mmatalka@gmail.com>, mikael
Reviewed by: markj
Sponsored by: FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33884
This helps mesuring what's happening when we load the kernel/modules/mfsroot.
This also adds TSENTER2 which uses the third argument of TSRAW, same
as in the kernel.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33699
Shortlinks occupy the space of both di_db and di_ib when used. However,
everywhere that wants to read or write a shortlink takes a pointer do
di_db and promptly runs off the end of it into di_ib. This is fine on
most architectures, if a little dodgy. However, on CHERI, the compiler
can optionally restrict the bounds on pointers to subobjects to just
that subobject, in order to mitigate intra-object buffer overflows, and
this is enabled in CheriBSD's pure-capability kernels.
Instead, clean this up by inserting a union such that a new di_shortlink
can be added with the right size and element type, avoiding the need to
cast and allowing the use of the DIP macro to access the field. This
also mirrors how the ext2fs code implements extents support, with the
exact same structure other than having a uint32_t i_data[] instead of a
char di_shortlink[].
Reviewed by: mckusick, jhb
Differential Revision: https://reviews.freebsd.org/D33650
tftp_open reads the first block so copy it in the cached data.
If we have more than one block (i.e. we called tftp_read before
tftp_preload) simply just reset the transfer.
Reported by: mmel
Reviewed by: mmel, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33697
The preload method will transfer the whole file in a buffer and cache it
so read/lseek operations are faster.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33410
When we load an ELF file (kernel or module) we do seek(2) a lot to
parse/load the different sections of the ELF file.
Protocol like TFTP suffers a lot from this as there is no resume or
a way to start the tranfer from a specified offset in the file.
fs_preload is added to help those protocol.
Call preload just after opening the ELF file that we need to load so
the underlying method can cache the hole file and then read/lseek operations
are faster.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33409
getsecs is very costly, reuse the values we got before.
Fetching a ~30MB kernel with the tftp command use to take ~26 seconds
and now it's ~18 seconds.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33408
When we load a kernel or module we open/close it a few times.
Since we're using the same port number each time and that we requested
the same file the ACK that we send are valid on the server side and the
server send us the file multiple times.
This makes tftp loading time very inconsistant due to the UDP "flood" that
we have to process.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33407
readtest will simply load the file in memory, useful for timing
loading on some filesystems.
Reviewed by: tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33411
tftp-hpa sends NAK with tftp error set to 0 when trying to get
a directory and this is the first thing that loader tries to do
and this make it hangs.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33406
As part of decommissioning mips support, remove the boot loader
support. Do this in advance of other boot loader work to limit the
amount of work that will be thrown away.
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33377
The STDSB macro is passed to the ffs_sbget() routine to fetch a
UFS/FFS superblock "from the stadard place". It was identically defined
in lib/libufs/libufs.h, stand/libsa/ufs.c, sys/ufs/ffs/ffs_extern.h,
and sys/ufs/ffs/ffs_subr.c. Delete it from these four files and
define it instead in sys/ufs/ffs/fs.h. All existing uses of this macro
already include sys/ufs/ffs/fs.h so no include changes need to be made.
No functional change intended.
Sponsored by: Netflix
net_open() does replace f_devdata with pointer to netdev_sock,
this will cause memory leak when device is closed, but also does
alter the devopen() logic.
We should store &netdev_sock to dev->d_opendata instead, this
would preserve and follow the devopen() logic.
Fixes network boot on aarch64 (tested by bz).
Reviewed-by: imp
MFC After: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32227
Pass the ivlen along through, and just drop this KASSERT() if we're
building _STANDALONE for the time being.
Fixes: 1833d6042c ("crypto: Permit variable-sized IVs ...")
Booting FreeBSD on an EC2 c5.xlarge instance, the loader "twiddles"
810 times over the course of 510 ms, a rate of 1.59 kHz. Even accepting
that many systems are slower than this particular VM and will take
longer to boot (especially if using spinning-rust disks), this seems
like an unhelpfully large amount of twiddling when compared to the
~60 Hz frame rate of many displays; printing the twiddles also consumes
roughly 10% of the boot time on the aforementioned VM.
Setting the default globaldiv to 16 dramatically reduces the time spent
printing twiddles to the console while still twiddling at roughly 100
Hz; this should be ample even for systems which take longer to boot and
consequently twiddle slower.
Note that this can adjusted via the twiddle_divisor variable in
loader.conf, but that file is not processed until nearly halfway
through the loader's runtime.
Reviewed by: allanjude, jrtc27, kevans
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: <https://reviews.freebsd.org/D32163>
Now that the loader tslog code doesn't call printf, we can profile
printf using TSLOG. On an EC2 c5.xlarge instance, we spend roughly
45 ms here (out of roughly 500 ms), presumably due to the time spent
writing output to the console.
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
We want to keep our root file system open to preserve bcache segment
between file accesses, thus reducing physical disk IO.
Reviewed by: imp, allanjude, kevans (previous version)
Differential Revision: https://reviews.freebsd.org/D30848
MFC after: 1 month
Summary:
Open file list is currently created as statically allocated array (64 items).
Once this array is filled up, loader will not be able to operate with files.
In most cases, this mechanism is good enough, but the problem appears, when
we have many disks with zfs pool(s). In current loader implementation, all
discovered zfs pool configurations are kept in memory and disk devices open -
consuming the open file array. Rewrite the open file mechanism to use
dynamically allocated list.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31364
servip is set from bootp bp_siaddr (if present) and rootip is
set immediately from servip in tha sane bootp code.
However, the common/dev_net.c does only set rootip (based on
url processing etc). Therefore, we should also use rootip in tftp
reader.
Fixes hung tftp based boot when bp_siaddr is not provided.
MFC after: 1 week
In my initial testing, these are the functions which showed up as
being worth instrumenting. More may be added later.
common/console.c: cons_probe
common/gfx_fb.c: read_list, insert_font, autoload_font
common/interp.c: interact
common/interp_lua.c: interp_init, interp_run
efi/libefi/efipart.c: efipart_readwrite
i386/libi386/biosdisk.c: bd_init, bd_open, bd_edd_io, bd_chs_io, bd_io
libsa/open.c: open
libsa/read.c: read
libsa/twiddle.c: twiddle
Note that profiling interp_run may be of questionable utility as it
may depend on user behaviour (e.g. pressing keys).
Reviewed by: kevans (earlier version)
At present this only supports x86, due to the use of the rdtsc
instruction; and is inert unless a buffer is allocated and passed to
the tslog code (which will be done by a future commit).
Reviewed by: kevans
A bug in the loader's bzipfs & gzipfs filesystems caused compressed
kernel and modules not to work on EFI systems with a veriexec-enabled
loader. Since the size of files in these filesystems are not known
_a priori_ `stat` would initialize the size to -1 and the loader would
then hang in an infinite loop while trying to seek (read) to the end
of file since the loop termination condition compares the current
offset to that negative target position.
Reviewers: vangyzen, imp, Bret Ketchum (Bret.Ketchum@dell.com)
Differential Revision: https://reviews.freebsd.org/D30414
Sponsored by: Dell EMC Isilon
MFC to: stable/12, stable/13
MFC after: 1 week
LLVM12 complains if you change the symbol binding:
`error: _longjmp changed binding to STB_GLOBAL`
In this case LLVM actually ignored the weak directive and used the
later .global, but GNU as would mark the symbol as weak.
None of the other architectures mark the libsa _setjmp as weak so
just drop this directive.
Parentheses added to HASZERO macro to avoid a GCC warning, and formatted
with clang-format as we have adopted these and don't consider them
'contrib' code.
Obtained from: musl (snapshot at commit 4d0a82170a25)
Reviewed by: kib (libc integration), mjg (both earlier)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17630
Notable upstream changes:
778869fa1 Fix reporting of mount progress
e7adccf7f Disable use of hardware crypto offload drivers on FreeBSD
03e02e5b5 Fix checksum errors not being counted on repeated repair
64e0fe14f Restore FreeBSD resource usage accounting
11f2e9a49 Fix panic if scrubbing after removing a slog device
MFC after: 2 weeks
Caller is not interested in symlinks follow them.
Throw an error if too many links encountered.
Reviewed by: stevek
Sponsored by: Juniper Networks
--This line, and those below, will be ignored--
> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization.
> Empty fields above will be automatically removed.
Change-Id: I4ef92ff256f503c620dc5bba79ed93b32cb2330d
The integer arrays are encoded in nvlist as counted array <count, i0, i1...>,
loader xdr_array() is missing the count. This will affect the pool import when
there are hole devices in pool.
Also fix the new data add and print functions.
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
We don't have NEON available in the boot loader, so we have to disable
it. OpenZFS included ZSTD which used the wrong symbol to bring in neon
support. Change to use the code that's been submitted upstream as a
pull request to both.
__ARM_NEON is the proper symbol, defined in ARM C Language Extensions
Release 2.1 (https://developer.arm.com/documentation/ihi0053/d/). Some
sources suggest __ARM_NEON__, but that's the obsolete spelling from
prior versions of the standard.
OpenZFS Pull Request: https://github.com/openzfs/zfs/pull/11055
ZSTD Pull Request: https://github.com/facebook/zstd/pull/2356
We are using asize property from pool label and we do not depend
on partition data to find last two pool labels and to validate LBA for disk IO.
This does allow us to re-enable support for partitionless disk setups.
The OpenZFS code that uses the BMI instructions is broken. Forcibly
disable them to prevent their use. When enabled, the build breaks.
This fixes the build when compiled for a core with BMI instructions.
This is the same fix committed in r364777, for the same issue.
Submitted by: Jung-uk Kim
Add support to the _STANDALONE environment enough bits of the kernel
that we can compile it. We still have a small zstd_shim.c since there
were 3 items that were a bit hard to nail down and may be cleaned up
in the future. These go hand in hand with a number of commits to
sys/sys in the past weeks, should this need be MFCd.
Discussed with: mmacy (in review and on IRC/Slack)
Reviewed by: freqlabs (on openzfs repo)
Differential Revision: https://reviews.freebsd.org/D26218
OpenZFS will start using some of the kernel timekeeping bits
shortly. This implements the bare minimum of that which currently
is just the time_seconds variable.
During devswitch probe, we pick boot pool based on boot disk, if the boot
disk happens to have multiple pools in freebsd-zfs partitions, the current
code does pick last pool from boot disk as boot pool. While there is no
way at that stage to test, the more logical approach would be to pick
first matching pool.
This patch is assuming we do pass pool guid pointer with guid value 0,
this will help us to determine, if the guid value is already set or not.
The general suggestion would be not to share disk between different pools.
Reported by: Alexander Leidinger
There was a small window cp was broken. Work around this by using :>
instead of cp /dev/null. Ideally, we'd keep the cp /dev/null in the
build as a regression test, but doing so breaks people that upgraded
during the cp breakage and this is simpler than bootstrapping a
working cp since there's no good __FreeBSD_version sign posts for
that.
Suggested by: lots of people
Too stubborn for his own good: imp
