Some hardware needs more than 32, bump this value.
We cannot use the _alloc for of getencprop as this function is called
too early in the boot before pmap is initialized and we only have
2k of stack when cninit is called.
Discussed with: ian
PowerPC, and possibly other architectures, use different address ranges for
PCI space vs physical address space, which is only mapped at resource
activation time, when the BAR gets written. The DRM kernel modules do not
activate the rman resources, soas not to waste KVA, instead only mapping
parts of the PCI memory at a time. This introduces a
BUS_TRANSLATE_RESOURCE() method, implemented in the Open Firmware/FDT PCI
driver, to perform this necessary translation without activating the
resource.
In addition to system KPI changes, LinuxKPI is updated to handle a
big-endian host, by adding proper endian swaps to the I/O functions.
Submitted by: mmacy
Reported by: hselasky
Differential Revision: https://reviews.freebsd.org/D21096
Pnpinfo is bus-specific and requires the bus name. The FDTCOMPAT_PNP_INFO()
macro makes it easier to define new FDT-based pnpinfo for busses other than
simplebus.
Differential Revision: https://reviews.freebsd.org/D20382
Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.
It's easy to apply/reapply when churn dies down.
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Nominal Mhz is either expressed via the clock-frequency property
or can be get via the clock property that holds the cpu clock.
Add support for the later.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D16346
Summary: In order to use cpufreq(4), a dev.cpu attachment must be created. If
the IBM property is found denoting SMT, attach only to the first thread setup,
so that a cpufreq device can bind.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15921
Summary:
Newer OPAL device trees, such as those on POWER9 systems, use 'pciex' for
device_type, not 'pci'. Rather than enumerating all possible variants, just
check for a 'pci' prefix.
Reviewed by: nwhitehorn, breno.leitao_gmail.com
Differential Revision: https://reviews.freebsd.org/D15817
Generating the pnp info have the side effect to include all nodes even
if the status isn't "okay".
That means that loading the module will load but not attach as it checks
the status in the probe function.
On pine64 before :
root@pine64-lts:~ # devmatch -u
unattached on ofwbus pnpinfo name=memory
unattached on ofwbus pnpinfo name=chosen
unattached on ofwbus pnpinfo name=sound_spdif compat=simple-audio-card
unattached on ofwbus pnpinfo name=spdif-out compat=linux,spdif-dit
unattached on simplebus pnpinfo name=dma-controller@1c02000 compat=allwinner,sun50i-a64-dma
unattached on simplebus pnpinfo name=mmc@1c10000 compat=allwinner,sun50i-a64-mmc
unattached on simplebus pnpinfo name=usb@1c19000 compat=allwinner,sun8i-a33-musb
unattached on simplebus pnpinfo name=spdif@1c21000 compat=allwinner,sun50i-a64-spdif
unattached on simplebus pnpinfo name=i2s@1c22000 compat=allwinner,sun50i-a64-i2s
unattached on simplebus pnpinfo name=i2s@1c22400 compat=allwinner,sun50i-a64-i2s
unattached on simplebus pnpinfo name=serial@1c28400 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c28800 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c28c00 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c29000 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=i2c@1c2ac00 compat=allwinner,sun6i-a31-i2c
unattached on simplebus pnpinfo name=i2c@1c2b000 compat=allwinner,sun6i-a31-i2c
unattached on simplebus pnpinfo name=i2c@1c2b400 compat=allwinner,sun6i-a31-i2c
unattached on ofwbus pnpinfo name=aliases
unattached on ofwbus pnpinfo name=symbols
All simplebus node are disabled
After :
root@pine64-lts:~ # devmatch -u
unattached on ofwbus pnpinfo name=memory
unattached on ofwbus pnpinfo name=chosen
unattached on ofwbus pnpinfo name=sound_spdif compat=simple-audio-card
unattached on ofwbus pnpinfo name=spdif-out compat=linux,spdif-dit
unattached on simplebus pnpinfo name=dma-controller@1c02000 compat=allwinner,sun50i-a64-dma
unattached on simplebus pnpinfo name=usb@1c19000 compat=allwinner,sun8i-a33-musb
unattached on ofwbus pnpinfo name=aliases
unattached on ofwbus pnpinfo name=symbols
Reviewed by: imp (with some objection)
Differential Revision: https://reviews.freebsd.org/D15770
Fix the behavior of ofw_fdt_getprop() and ofw_fdt_getprop() functions to match
the documentation as the non-fdt code.
Submitted by: Luis Pires <lffpires@ruabrasil.org>
Reviewed by: manu, jhibbits
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D15680
Change OF_getencprop_alloc semantics to be combination of malloc and
OF_getencprop and return size of the property, not number of elements
allocated.
For the use cases where number of elements is preferred introduce
OF_getencprop_alloc_multi helper function that copies semantics
of OF_getencprop_alloc prior to this change.
This is to make OF_getencprop_alloc and OF_getencprop_alloc_multi
function signatures consistent with OF_getencprop_alloc and
OF_getencprop_alloc_multi.
Functionality-wise this patch is mostly rename of OF_getencprop_alloc
to OF_getencprop_alloc_multi except two calls in ofw_bus_setup_iinfo
where 1 was used as a block size.
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
According to device tree binding 'assigned-addresses' can refer to PCIE MMIO
register space. New function ofw_bus_assigned_addresses_to_rl is
provided to support it.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14750
OF_finddevices returns ((phandle_t)-1) in case of failure. Some code
in existing drivers checked return value to be equal to 0 or
less/equal to 0 which is also wrong because phandle_t is unsigned
type. Most of these checks were for negative cases that were never
triggered so trhere was no impact on functionality.
Reviewed by: nwhitehorn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14645
libfdt now provides methods to iterate through subnodes and properties in a
convenient fashion.
Replace our ofw_fdt_{peer,child} searches with calls to their corresponding
libfdt methods. Rework ofw_fdt_nextprop to use the
fdt_for_each_property_offset macro, making it even more obvious what it's
doing.
No functional change intended.
Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14225
zero, matching the IEEE 1275 standard. Since these internal error paths
have never, to my knowledge, been taken, behavior is unchanged.
Reported by: gonzo
MFC after: 2 weeks
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This patch modifies function ofw_fdt_setprop (called by OF_setprop),
so that it can add property, when replacing is not possible.
Adding property is needed to fixup FDT's that have missing
properties.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: nwhitehorn, cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11879
Before this patch function ofw_bus_find_compatible was using
memory allocations in order to find compatible node and the property's
length. This way there was always a suited buffer for property,
however this approach had also disadvantages - ofw_bus_find_compatible
couldn't be used when malloc is not available, e.g. during fdt fixup stage.
In order to remove the usage limitation of ofw_bus_find_compatible(),
this patch modifies the function to use ofw_bus_node_is_compatible()
(instead of the one without _int suffix), which uses a fixed
buffer on stack instead of dynamic allocations.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: nwhitehorn, cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11880
Sometimes it's convenient to provide fixup to many boards
that use the same SoC family (eg. Marvell Armada 38x).
Instead of putting multiple entries in fdt_fixup_table,
use one entry which refers to all boards with given SoC.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: nwhitehorn, cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11878
not consider a "disabled" cpu as a CPU we have to ignore, and we should use
them if they provide a "enable-method".
While I'm there, support "ok" as well as "okay", while ePAPR only accepts
"okay", linux accepts "ok" too so we can expect it to be used.
Reviewed by: andrew (partially)
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Convert PCIe hot plug support over to asking the firmware, if any, for
permission to use the HotPlug hardware. Implement pci_request_feature
for ACPI. All other host pci connections to allowing all valid feature
requests.
Sponsored by: Netflix
method
Method could be used before we can access device_t structure.
As per simple phandle_t handle we can access FDT to check
if specified node has been enabled.
It will be used in Marvell's common configuration code.
Submitted by: Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: zbb, meloun-miracle-cz
Differential revision: https://reviews.freebsd.org/D9218
Summary:
If the environment variable is set, U-boot adds a 'bootargs' property to
/chosen. This is already handled by ARM and MIPS, but should be handled in a
central location. For now, ofw_subr.c is a good place until we determine if it
should be moved to init_main.c, or somewhere more central to all architectures.
Eventually arm and mips should be modified to use ofw_parse_bootargs() as well,
rather than using the duplicate code already.
Reviewed By: adrian
Differential Revision: https://reviews.freebsd.org/D7846
Summary:
Some device trees put "fsl,ns16650" first in the compatible list. This causes
the probe code to choke, even though the device is compatible with ns16650, and
has it listed later in the tree.
Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7676
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
Make FDT blob available via opaque hw.fdt.dtb sysctl, if a DTB has been
installed by the time sysctls are registered.
Reviewed by: andrew
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D7411
