It's likely that the header was needed in the past for swi(9).
But now that code does not use swi(9) or any other interfaces defined
in sys/interrupt.h.
MFC after: 1 week
Probing host aware and host managed SMR drives got broken in revision
330796.
The added cam_periph_lock() calls were in areas in dadone() where
the peripheral lock was already held.
Since then, dadone() has been split into separate functions that are
dedicated to each probe state.
The result is that when probing a host aware drive, I ran into a recursive
lock acquisition in dadone_probeatalogdir(). I would have run into the
same problem in dadone_probeataiddir(), and in dadone_probeatasup() and
dadone_probeatazone() in the error paths had the probe continued.
The solution is to take out all of the extra cam_periph_lock() calls. I
also added cam_periph_assert(periph, MA_OWNED) near the top of each of
the dadone_* calls. These make it clear to anyone coming along in the
the future that the lock is held in the probe done functions.
Also add a locking assert in daprobedone(), to make it clear that it must
be called with the periph lock held.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D15764
When a disk disappears and the periph is invalidated, any I/Os that
are pending with the controller can cause a crash when they
complete. Move to holding the softc reference count taken in dastart()
until the I/O is complete rather than only until xpt_action()
returns. (This approach was suggested by Ken Merry.)
Sponsored by: Netflix
Submitted by: Chuck Silvers
Differential Revision: https://reviews.freebsd.org/D15435
a 1500 line switch statement. Callers now specify a discrete completion
handler, though they're still welcome to track state via ccb_state.
Sponsored by: Netflix
pointer. It's now unhelpful and misleading for callers to continue to set
it, so bring all callers into conformance. There's no real functional change,
but it makes reading the code a lot less confusing.
Sponsored by: Netflix
When the tape position is inside the Early Warning area, the tape
drive will return a sense key of NO SENSE, and an ASC/ASCQ of
0x00,0x02, which means: End-of-partition/medium detected". If
this was in response to a control command like WRITE FILEMARKS,
we correctly translate this as informational status and return
0 from saerror().
Programmable Early Warning should be handled the same way, but
we weren't handling it that way. As a result, if a PEW status
(sense key of NO SENSE, ASC/ASCQ of 0x00,0x07, "Programmable early
warning detected") came back in response to a WRITE FILEMARKS,
we returned an error.
The impact of this was that if an application was writing to a
sa(4) device, and a PEW area was set (in the Device Configuration
Extension subpage -- mode page 0x10, subpage 1), and a filemark
needed to be written on close, we could wind up returning an error
to the user on close because of a "failure" to write the filemarks.
It actually isn't a failure, but rather just a status report from
the drive, and shouldn't be treated as a failure.
sys/cam/scsi/scsi_sa.c:
For control commands in saerror(), treat asc/ascq 0x00,0x07
the same as 0x00,{0-5} -- not an error. Return 0, since
the command actually did succeed.
Reported by: Dr. Andreas Haakh <andreas@haakh.de>
Tested by: Dr. Andreas Haakh <andreas@haakh.de>
Sponsored by: Spectra Logic
MFC after: 3 days
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
have one pending. Otherwise, we can race and send two, which is
wasteful in close proximity. It can also cause the acaquire/release
count for TUR to be > 1, which is undexpected.
PR: 226510
Differential Review: https://reviews.freebsd.org/D14792
do this right, except when there's no BP and we do a TUR by request.
In that case, we clear the flag, but don't release the reference,
leaking the reference on rare occasion.
PR: 226510
Sponsored by: Netflix
<machine/stdarg.h> is a kernel-only header. The standard header for
userland is <stdarg.h>. Using the standard header in userland avoids
weird build errors when building with external compilers that include
their own stdarg.h header.
Reviewed by: arichardson, brooks, imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14776
The ch(4) driver was missed in change 328918, which changed
cam_periph_acquire() to return an errno instead of cam_status.
As a result, ch(4) failed to attach.
Sponsored by: Spectra Logic
softc for an async unit attention. CAM locks, sometimes, the periph
lock and other times does not. We were taking the lock always and
running into lock recursion issues on a non-recursive lock. Now we
take it selectively. It's not clear why xpt takes the lock selectively
before calling us, though, and that's still under investigation.
Reported by: avg
PR: 226510 (same panic, differnt circumstances)
Sponsored by: Netflix
kern.cam.{,a,n}da.X.invalidate=1 forces *daX to detach by calling
cam_periph_invalidate on the underlying periph. This is for testing
purposes only. Include only with options CAM_TEST_FAILURE and rename
the former [AN]DA_TEST_FAILURE, and fix nda to compile with it set.
We're using it at work to harden geom and the buffer cache to be
resilient in the face of drive failure. Today, it far too often
results in a panic. While much work was done on SIM initiated removal
for the USB thumnb drive removal work, little has been done for periph
initiated removal. This simulates what *daerror() does for some errors
nicely: we get the same panics with it that we do with failing drives.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14581
The ioctl objects contain pointers and require translation and some
refactoring of the infrastructure to work. For now prevent opertion
on garbage values. This is very slightly overbroad in that ENCIOC_INIT
is safe.
Reviewed by: imp, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14671
These take a union ccb argument which is full of kernel pointers.
Substantial translation efforts would be required to make this work.
By rejecting the request we avoid processing or returning entierly
wrong data.
Reviewed by: imp, ken, markj, cem
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14654
Make sure the periph lock is held around rmw access to softc data,
espeically flags, including work flags in iosched.
Add asserts for the periph lock where it should be held.
PR: 226510
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D14456
Introduce flags word to describe the capacities of the peripheral.
First bit will describe if the periph driver allows multiple
outstanding TRIMS to be active in a device.
Modify the I/O scheduler so that the nda driver can queue trims
for a while after the first one arrives. We'll queue until we see
a I/O scheduler tick, then we'll schedule as many TRIMs as allowed
by other factors (currently this is slocts in the NVMe controller).
This mariginally helps the read latency issues we see with reads,
but sets the stage for the nda driver to do TRIM collapsing like the
da and ada drivers do today.
Sponsored by: Netflix
There's no compelling reason to return a cam_status type for this
function and doing so only creates confusion with normal C
coding practices. It's technically an API change, but the periph API
isn't widely used. No efffective change to operation.
Reviewed by: imp, mav, ken
Sponsored by: Netflix
Differential Revision: D14063
leaks. We assume each source can be taken / dropped only once and
don't recurse. These are only enabled via DA_TRACK_REFS or
INVARIANTS. There appreas to be a reference leak under extreme load,
and these should help us colaberatively work it out. It also documents
better the reference / holding protocol better.
Reviewed by: ken@, scottl@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14040
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 3 weeks
Move the the NetBSD tag near to the related licence. Update it to reflect
better the point where we started diverging.
Use grouping parenthesis for the SPDX tag.
No functional change.
Ths change consists of two parts.
geom_disk: deny opening a disk for writing if it's marked as
write-protected. A new disk(9) flag is added to mark write protected
disks. A possible alternative could be to add another parameter to d_open,
so that the open mode could be passed to it and the disk drivers could
make the decision internally, but the flag required less churn.
scsi_da: add a new phase of disk probing to query the all pages mode
sense page. We can determine if the disk is write protected using bit 7
of the device specific field in the mode parameter header returned by
MODE SENSE.
PR: 224037
Reviewed by: mav
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D13360
inline ccbque.h into scsi_low.h. The file isn't MD, so shouldn't live
in i386/isa. It's only used by scsi_low, so move it there so no new
clients accidentally grow. scsi_low may not even still work, and the
locking here is still SPL based. CAM should do the right thing, but
I've received no reports of these cards still working. At least it
compiles still and there's one fewer files in sys/i386/isa. While I'm
here, ansify and de-splize. CCB_MWANTED appears to be a clear-only
flag, but I've not changed that.
Differential Review: https://reviews.freebsd.org/D13672
from the ada and da dump routines. This avoids difficult locking
problems from needing to be handled. While it might seem like this
would leave the periphs unprotected during dump, they were aleady
at risk of unexpected removal due to the dump functions not
keeping refcount state across the many calls that come in during
a dump. This is an exercise for future work.
Obtained from: Netflix
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
This provides a nice wrarpper around the XPT_PATH_INQ ccb creation and
calling.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13387
kernel scheduler is stopped, replace the by hand calling of
xpt_polled_action() with it.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13388
currently harmless for AC_UNIT_ATTENTION event (cam_periph_async does
nothing with them), it's still in error because if it were to start in
the future, it would be done twice.
Sponsored by: Netflix
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Like its predecessor ST8000AS0002, this is a drive-managed SMR drive, but
doesn't declare that in its ATA identify data.
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
sys/cam/scsi/scsi_da.c
Complete BIO_FLUSH commands immediately if the da(4) device hasn't
been written to since the last flush. If we haven't written to the
device, there is no reason to send a flush.
Submitted by: gibbs
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13106
In scsi_dev_advinfo(), if the physical path is being stored and there is a
malloc failure (malloc(9) is called with M_NOWAIT), we could wind up in a
situation where the device's physpath_len is set to the length the user
provided, but the physpath itself is NULL.
If another context then comes in to fetch the physical path value, we would
wind up trying to memcpy a NULL pointer into the caller's buffer.
So, set the physpath_len to 0 when we free the physpath on entry into the
store case for the physical path. Reset the length to a non-zero value only
after we've successfully malloced a buffer to hold it.
Submitted by: ken
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
