we have another PCB which is bound to 0.0.0.0. If a PCB has the
INP_IPV6 flag, then we set its cost higher than IPv4 only PCBs.
Submitted by: Keiichi SHIMA <keiichi__at__iijlab.net>
Obtained from: KAME
MFC after: 1 week
store some pipe pointers on stack. If user reconfigures dummynet
in the interlock gap, we can work with freed pipes after relock.
To fix this, we decided not to send packets in transmit_event(),
but fill a queue. At the end of dummynet() and dummynet_io(),
after the lock is dropped, if there is something in the queue
we run dummynet_send() to process the queue.
In collaboration with: ru
filtering mechanisms to use the new rwlock(9) locking API:
- Drop the variables stored in the phil_head structure which were specific to
conditions and the home rolled read/write locking mechanism.
- Drop some includes which were used for condition variables
- Drop the inline functions, and convert them to macros. Also, move these
macros into pfil.h
- Move pfil list locking macros intp phil.h as well
- Rename ph_busy_count to ph_nhooks. This variable will represent the number
of IN/OUT hooks registered with the pfil head structure
- Define PFIL_HOOKED macro which evaluates to true if there are any
hooks to be ran by pfil_run_hooks
- In the IP/IP6 stacks, change the ph_busy_count comparison to use the new
PFIL_HOOKED macro.
- Drop optimization in pfil_run_hooks which checks to see if there are any
hooks to be ran, and returns if not. This check is already performed by the
IP stacks when they call:
if (!PFIL_HOOKED(ph))
goto skip_hooks;
- Drop in assertion which makes sure that the number of hooks never drops
below 0 for good measure. This in theory should never happen, and if it
does than there are problems somewhere
- Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep
- Drop variables which support home rolled read/write locking mechanism from
the IPFW firewall chain structure.
- Swap out the read/write firewall chain lock internal to use the rwlock(9)
API instead of our home rolled version
- Convert the inlined functions to macros
Reviewed by: mlaier, andre, glebius
Thanks to: jhb for the new locking API
and signifincantly improve the readability of ip_input() and
ip_output() again.
The resulting IPSEC hooks in ip_input() and ip_output() may be
used later on for making IPSEC loadable.
This move is mostly mechanical and should preserve current IPSEC
behaviour as-is. Nothing shall prevent improvements in the way
IPSEC interacts with the IPv4 stack.
Discussed with: bz, gnn, rwatson; (earlier version)
will be sent if there is an address on the bridge. Exclude the bridge from the
special arp handling.
This has been tested with all combinations of addresses on the bridge and members.
Pointed out by: Michal Mertl
however IPv4-in-IPv4 tunnels are now stable on SMP. Details:
- Add per-softc mutex.
- Hold the mutex on output.
The main problem was the rtentry, placed in softc. It could be
freed by ip_output(). Meanwhile, another thread being in
in_gif_output() can read and write this rtentry.
Reported by: many
Tested by: Alexander Shiryaev <aixp mail.ru>
ip_forward() would report back a zero MTU in ICMP needfrag messages
because on a IPSEC SP lookup failure no MTU got computed.
Fix this by changing the logic to compute a new MTU in any case if
IPSEC didn't do it.
Change MTU computation logic to use egress interface MTU if available
or the next smaller MTU compared to the current packet size instead
of falling back to a very small fixed MTU.
Fix associated comment.
PR: kern/91412
MFC after: 3 days
ia_hash only if it actually is an AF_INET address. All other places
test for sa_family == AF_INET but this one.
PR: kern/92091
Submitted by: Seth Kingsley <sethk-at-meowfishies.com>
MFC after: 3 days
If net.link.ether.inet.useloopback=1 and we send broadcast packet using our
own source ip address it may be rejected by uRPF rules.
Same bug was fixed for IPv6 in rev. 1.115 by suz.
PR: kern/76971
Approved by: glebius (mentor)
MFC after: 3 days
Vararg functions have a different calling convention than regular
functions on amd64. Casting a varag function to a regular one to
match the function pointer declaration will hide the varargs from
the caller and we will end up with an incorrectly setup stack.
Entirely remove the varargs from these functions and change the
functions to match the declaration of the function pointers.
Remove the now unnecessary casts.
Lots of explanations and help from: peter
Reviewed by: peter
PR: amd64/89261
MFC after: 6 days
errors from rn_inithead back to the ipfw initialization function.
- Check return value of rn_inithead for failure, if table allocation has
failed for any reason, free up any tables we have created and return ENOMEM
- In ipfw_init check the return value of init_tables and free up any mutexes or
UMA zones which may have been created.
- Assert that the supplied table is not NULL before attempting to dereference.
This fixes panics which were a result of invalid memory accesses due to failed
table allocation. This is an issue mainly because the R_Zalloc function is a
malloc(M_NOWAIT) wrapper, thus making it possible for allocations to fail.
Found by: Coverity Prevent (tm)
Coverity ID: CID79
MFC after: 1 week
This fixes a bug in the previous commit.
Found by: Coverity Prevent(tm)
Coverity ID: CID253
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
change the mbuf pointer and we don't have any way of passing
it back to the callers. Instead just fail silently without
updating the checksum but leaving the mbuf+chain intact.
A search in our GNATS database did not turn up any match for
the existing warning message when this case is encountered.
Found by: Coverity Prevent(tm)
Coverity ID: CID779
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
that currently can't be triggered. But better be safe than sorry
later on. Additionally it properly silences Coverity Prevent for
future tests.
Found by: Coverity Prevent(tm)
Coverity ID: CID802
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
route MTU.
This bug is very difficult to reach and not remotely exploitable.
Found by: Coverity Prevent(tm)
Coverity ID: CID162
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
may have changed by m_pullup() during fastforward processing.
While this is a bug it is actually never triggered in real world
situations and it is not remotely exploitable.
Found by: Coverity Prevent(tm)
Coverity ID: CID780
Sponsored by: TCP/IP Optimization Fundraise 2005
ipq_zone, to allocate fragment headers from, rather than using cast mbuf
storage. This was one of the few remaining uses of mbuf storage for
local data structures that relied on dtom(). Implement the resource
limit on ipq's using UMA zone limits, but preserve current sysctl
semantics using a sysctl proc.
MFC after: 3 weeks
Correct insecure temporary file usage in ee. [06:02]
Correct a race condition when setting file permissions, sanitize file
names by default, and fix a buffer overflow when handling files
larger than 4GB in cpio. [06:03]
Fix an error in the handling of IP fragments in ipfw which can cause
a kernel panic. [06:04]
Security: FreeBSD-SA-06:01.texindex
Security: FreeBSD-SA-06:02.ee
Security: FreeBSD-SA-06:03.cpio
Security: FreeBSD-SA-06:04.ipfw
interfaces to bridges, which will then send and receive IP protocol 97 packets.
Packets are Ethernet frames with an EtherIP header prepended.
Obtained from: NetBSD
MFC after: 2 weeks
action argument with the value obtained from table lookup. The feature
is now applicable only to "pipe", "queue", "divert", "tee", "netgraph"
and "ngtee" rules.
An example usage:
ipfw pipe 1000 config bw 1000Kbyte/s
ipfw pipe 4000 config bw 4000Kbyte/s
ipfw table 1 add x.x.x.x 1000
ipfw table 1 add x.x.x.y 4000
ipfw pipe tablearg ip from table(1) to any
In the example above the rule will throw different packets to different pipes.
TODO:
- Support "skipto" action, but without searching all rules.
- Improve parser, so that it warns about bad rules. These are:
- "tablearg" argument to action, but no "table" in the rule. All
traffic will be blocked.
- "tablearg" argument to action, but "table" searches for entry with
a specific value. All traffic will be blocked.
- "tablearg" argument to action, and two "table" looks - for src and
for dst. The last lookup will match.
of the radix lookup tables. Since several rnh_lookup() can run in
parallel on the same table, we can piggyback on the shared locking
provided by ipfw(4).
However, the single entry cache in the ip_fw_table can't be used lockless,
so it is removed. This pessimizes two cases: processing of bursts of similar
packets and matching one packet against the same table several times during
one ipfw_chk() lookup. To optimize the processing of similar packet bursts
administrator should use stateful firewall. To optimize the second problem
a solution will be provided soon.
Details:
o Since we piggyback on the ipfw(4) locking, and the latter is per-chain,
the tables are moved from the global declaration to the
struct ip_fw_chain.
o The struct ip_fw_table is shrunk to one entry and thus vanished.
o All table manipulating functions are extended to accept the struct
ip_fw_chain * argument.
o All table modifing functions use IPFW_WLOCK_ASSERT().
o Do not use ipfw_insn_pipe->pipe_ptr in locate_flowset(). The
_ipfw_insn_pipe isn't touched by this commit to preserve ABI
compatibility.
o To optimize the lookup of the pipe/flowset in locate_flowset()
introduce hashes for pipes and queues:
- To preserve ABI compatibility utilize the place of global list
pointer for SLIST_ENTRY.
- Introduce locate_flowset(queue nr) and locate_pipe(pipe nr).
o Rework all the dummynet code to deal with the hashes, not global
lists. Also did some style(9) changes in the code blocks that were
touched by this sweep:
- Be conservative about flowset and pipe variable names on stack,
use "fs" and "pipe" everywhere.
- Cleanup whitespaces.
- Sort variables.
- Give variables more meaningful names.
- Uppercase and dots in comments.
- ENOMEM when malloc(9) failed.
