r256095:
- Add gnu/usr.bin/rcs back to the base system.
r256120:
- Add WITHOUT_RCS back to src.conf.5.
r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.
Requested by: many
Approved by: re (marius)
Discussed with: core
The libarchive-based replacements have been used since 2009; the GNU
ones were kept to support source upgrades from FreeBSD 6.
Approved by: re@ (delphij)
errors when you enable WITH_GNUCXX to build libstdc++, since it will
include C++ headers from the libc++ installation under ${WORLDTMP}, and
those are not compatible with libstdc++ at all.
To fix this, add -stdlib=libstdc++ to CXXFLAGS when building libstdc++
(and its companion libsupc++) with clang.
Approved by: re (delphij)
To enable them, set WITH_GCC and WITH_GNUCXX in src.conf.
Make clang default to using libc++ on FreeBSD 10.
Bumped __FreeBSD_version for the change.
GCC is still enabled on PC98, because the PC98 bootloader requires GCC to build
(or, at least, hard-codes the use of gcc into its build).
Thanks to everyone who helped make the ports tree ready for this (and bapt
for coordinating them all). Also to imp for reviewing this and working on the
forward-porting of the changes in our gcc so that we're getting to a much
better place with regard to external toolchains.
Sorry to all of the people who helped who I forgot to mention by name.
Reviewed by: bapt, imp, dim, ...
The old (2.1) GNU patch has outlived its days. The major
local changes have been moved into the less restrictedly
licensed patch(1) we adopted in usr.bin/ .
A much newer version of GNU patch is available in the
ports tree (devel/patch).
Disconnect from the build and remove.
-maes option, but not the -mpclmul option as I ran out of bits in
the 32 bit flags field... You can -D__PCLMUL__ to get this, but it
won't be compatible w/ clang and modern gcc...
Reviewed by: -current, -toolchain
As promised, drop the option to make the older GNU patch
the default.
GNU patch is still being built but something drastic may
happen to it to it before Release.
echo xxx | grep -D skip xxx
returns nothing. Instead of just removing added S_ISFIFO condition
(originally absent in this version of grep), make it work as latest
GNU version does: don't skip directories and devices if fd == STDIN_FILENO.
The BSD-licensed patch(1) command has matured and it's behaviour
can be considered equivalent to the older version of GNU patch
in the tree.
The switch has been extensively tested [1] and only two ports
presented regressions, which have since been fixed.
For convenience a new WITH_GNU_PATCH option is available,
but it will likely be removed in the near future.
PR: 176313
Approved by: portmgr
accurately fills the read buffer.
Callers of pgets() still mis-process the buffer contents if the read line
contains NUL characters, but this at least makes pgets() accurate.
The former makes a copy of stdin, but was not accurately putting the
content of stdin into a temp file. This lead to the undercounting
the number of lines in hunks containing NUL characters when reading
from stdin. Thus resulting in "unexpected end of file in patch" errors.
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
Change several int variables to size_t, ssize_t, or ptrdiff_t.
This should fix the bug described in CVE-2012-5667 when an input
line is so long that its length cannot be stored in an int
variable.
This is based on NetBSD's revision which says:
This change to NetBSD's version of GNU grep 2.5.1 (licenced under
GPLv2) was made without direct reference to any code licenced
under GPLv3.
Obtained from: NetBSD
MFC after: 3 days
Originally we disabled libcompiler-rt on MIPS and SPARC64, because of an
issue where __clzdi2 and __ctzdi2 would cause endless recursion. This
bug has been fixed in r230021 already, but for some reason we only
switched to libcompiler-rt on SPARC64 -- not MIPS.
This means we can finally use <stdatomic.h> on all our architectures.
When looking up the absolute path for a kld, call find_kld_path() first.
This enables locating the module in a different directory than the one
stored in kernel memory.
With this change, kgdb can now be run on a kernel & vmcore whose associated
modules are located in the same directory as the kernel. This makes
independent triaging of problems much easier.
This change also does not break the normal kgdb use case where no arguments
are specified; in that case kgdb loads the running kernel and its modules.
Reviewed by: adrian
Approved by: ken (mentor)
Sponsored by: Spectra Logic
MFC after: 1 month
the symbols in compiler-rt, including the ones not available in the old
libgcc. This fixes the build with clang which generates calls to funstions
that are missing from libgcc_s.
* document the kgdb -b flag
* better verify what's valid with -b
* add more comprehensive command line help
PR: kern/175743
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
on a core, when the core was stopped, by calling kgdb_trgt_core_pcb().
This has 2 advantages:
1. We don't need to include a machine-specific header anymore and as
such kthr.c is truly machine independent. This allows the code to
be used in a cross-debugger.
2. We don't need to lookup stoppcbs in generic code when it's an
inherently target-spicific symbol. It does not exist for ia64.
Implement kgdb_trgt_core_pcb() for all architectures, except ia64, by
calling a common function called kgdb_trgt_stop_pcb(). This function
differs from kgdb_trgt_core_pcb() in that it gets the size of the PCB
structure as an argument and as such remains machine independent.
On ia64 the PCB for stopped cores is in the PCPU structure itself.
This for better scaling. The implementation of kgdb_trgt_core_pcb()
for ia64 uses the cpuid_to_pcpu[] array to to obtain the address of
the PCB structure.
DragonflyBSD and install it as bsdpatch. WITH_BSD_PATCH makes it
default and installs GNU patch as gnupatch.
Submitted by: pfg
Obtained from: The DragonflyBSD Project
that were causing the runtime and STL libraries to see different versions of
various classes and functions when libstdc++ is used as a filter.
Note: This changes the ABI for libcxxrt, but libcxxrt is currently only in
-STABLE for testing and is not used by anything unless explicitly enabled by
the end user. No default compiler configurations use it.
libc++ will need to be recompiled after this change. make buildworld will do
this automatically, but make in lib/libc++ will not necessarily work unless the
new libcxxrt is installed first.
PR: kern/171610, stand/175453
Reviewed by: kib
MFC after: 1 week
be used on the host system (and not installed on the device, if required). The
GPL'd one is still available if there are any devices that need it (make
universe passes with it, including kernels that use fdt, but there may be some
out-of-tree ones). WITH_GPL_DTC can be used to select the old one, for now.
Probably won't be MFC'd, but we'll remove the GPL'd version in head after the
new one has had a lot more testing and ship it in 10.0.
This allows a remote session to be specified with '-r' as well as a
non-default baudrate setting using '-b'.
TODO: add to the kgdb manpage.
MFC after: 2 weeks
ARM EABI support is disabled by default and can be enabled by setting
WITH_ARM_EABI when building, however only the kernel-toolchain target will
work with this flag until the rest of the support is added.