Commit Graph

66 Commits

Author SHA1 Message Date
Pawel Jakub Dawidek
0218292cdf Update copyright in files changed this year. 2005-02-16 22:14:52 +00:00
Pawel Jakub Dawidek
437566858a Increase default synchronization speed.
MFC after: 3 days
2005-01-09 14:43:39 +00:00
Pawel Jakub Dawidek
da84416791 Spoiling is now not possible, because we keep consumers open for writing
all the time. Remove unused code then.

MFC after:	4 days
2005-01-04 12:11:49 +00:00
Pawel Jakub Dawidek
fd6d312082 Fix 'rebuild' command (we ignore retaste event now, so don't relay on it). 2005-01-03 19:42:37 +00:00
John Baldwin
63710c4d35 Stop explicitly touching td_base_pri outside of the scheduler and simply
set a thread's priority via sched_prio() when that is the desired action.
The schedulers will start managing td_base_pri internally shortly.
2004-12-30 20:29:58 +00:00
Pawel Jakub Dawidek
538ff5ee7a Update disk->d_genid field when increasing sc->sc_genid. 2004-12-23 21:15:15 +00:00
Pawel Jakub Dawidek
9a9f504132 - Add genid field to the metadata which will allow to improve reliability a bit.
After this change, when component is disconnected because of an I/O error,
  it will not be connected and synchronized automatically, it will be logged
  as broken and skipped. Autosynchronization can occur, when component is
  disconnected (on orphan event) and connected again - there were no I/O
  error, so there is no need to not connected the component, but when there were
  writes while it wasn't connected, it will be synchronized.
  This fix cases, when component is disconnected because of I/O error and can be
  connected again and again.
- Bump version number.
- Add version change history.
- Implement backward compatibility mechanism. After this change when metadata in
  old version is detected, it is automatically upgraded to the new (current)
  version.
2004-12-22 23:09:32 +00:00
Pawel Jakub Dawidek
4485f00081 Now, when force device destruction is done on shutdown, hide warning,
that device cannot be destroyed immediately, under debug=1.

Suggested by:	simon
2004-12-21 19:50:18 +00:00
Pawel Jakub Dawidek
f663832b75 This should not be permitted, but some GEOM classes held the topology lock
while doing g_(read|write)_data() (e.g. BSD). This can cause a deadlock
in MIRROR class. Not sure if this is safe to drop the topology lock in BSD
class, so change the code in MIRROR class to avoid this deadlock.
2004-12-21 18:42:51 +00:00
Pawel Jakub Dawidek
dc7d54e7b3 Remove unused variables. 2004-12-19 23:55:49 +00:00
Pawel Jakub Dawidek
a2a7b44de0 - Argument 'flags' in g_mirror_destroy_consumer() function is unsed -
mark it as such.
- Before closing consumer check if it is open. It can be closed here
  when g_mirror_connect_disk() fails on g_access().
2004-12-19 23:33:59 +00:00
Pawel Jakub Dawidek
9eec299fab Some major cleanups.
Keeping consumers open when device is closed is very hard. We need to
open consumers sometimes to update metadata, etc.
Many hacks was introduced in the past to made it possible. You cannot
be sure that you can open consumer for writing always, even if you think
it should be allowed. If one of the mirror components is for example da0
and you try to open it, you can get EPERM when da0s1 is opened for reading
(because BSD class opens consumers (da0) with an extra 'e' bit set).
Waiting for the events queue to be empty may do the trick, but it makes
code much uglier (as you cannot always call g_waitidle()), it doesn't
solve all edge cases and it can introduce deadlocks if there are events
in the queue that wait for gmirror.

I removed those hacks. Now all consumers are open r1w1e1 always, even if
device is closed. Maybe it is less clean from GEOM perspective, but simpify
code a lot and make it much more reliable.
The only issue was retaste event which is sent when we close consumers
opened for writing. I ignore retaste event by not detaching consumer
immediately (so retaste event is not send to my class) and sending event
right after it to detach and destroy consumer.
2004-12-19 23:12:00 +00:00
Pawel Jakub Dawidek
c37e2f9bbf Don't quit on first failure, just skip failures. 2004-12-19 22:58:25 +00:00
Pawel Jakub Dawidek
085f43afae Before trying to update metadata (so open consumer for writing), be sure
that the events queue is empty. In other case we're able to hit the race
where for example da0s1 is tasted by some other class, which means that
da0 is open with exclusive bit set, which means that we can't open da0
for writing if it is our component.

Reported by:	Attila Nagy <bra@fsn.hu> (and somebody else sometime ago,
		                          but I cannot find who it was)
2004-11-09 23:27:21 +00:00
Pawel Jakub Dawidek
b36b4bfb55 Don't rely on DIRTY flag to be sure that consumer if open, because
DIRTY flag can be removed in idle process. Use consumer's acw field
instead to avoid opening consumer twice.
2004-11-09 23:15:40 +00:00
Pawel Jakub Dawidek
fdc3c6ce23 Drop Giant lock before grabbing the topology lock. 2004-11-09 00:35:08 +00:00
Pawel Jakub Dawidek
463674f7e0 If device is marked as beeing destroyed, deny all access requests. 2004-11-08 20:23:53 +00:00
Pawel Jakub Dawidek
9bb09163fc Don't forget to make sure that there are no not-finished requests before
marking components as clean.

Pointed out by:	scottl
2004-11-05 17:18:39 +00:00
Pawel Jakub Dawidek
6349471be3 Use shutdown hooks to mark mirrors as clean after all file systems are
unmounted.

Suggested by:	scottl
2004-11-05 12:35:21 +00:00
Pawel Jakub Dawidek
127cf38ee4 Remove unused #include. 2004-11-05 12:31:32 +00:00
Pawel Jakub Dawidek
14089dae44 - Add a sysctl kern.geom.mirror.idletime, so one can specify after how many
seconds of idling, DRITY flags are removed.
- If mirror is in idle state or is not open for writing, sleep without
  timeout when waiting for I/O requests.
- Don't use atomic operations, for now sysctls are protected by Giant.
- Update debugs.
2004-11-05 10:55:04 +00:00
Pawel Jakub Dawidek
2fdf5be172 MFp4:
- Fix for good (I hope) force-stopping mirrors and some filure cases
  (e.g. the last good component dies when synchronization is in progress).
  Don't use ->nstart/->nend consumer's fields, as this could be racy,
  because those fields are used in g_down/g_up, use ->index consumer's
  field instead for tracking number of not finished requests.

  Reported by:	marcel

- After 5 seconds of idle time (this should be configurable) mark all
  dirty providers as clean, so when mirror is not used in 5 seconds
  and there will be power failure, no synchronization on boot is needed.

  Idea from:	sorry, I can't find who suggested this

- When there are no ACTIVE components and no NEW components destroy whole
  mirror, not only provider.

- Fix one debug to show information about I/O request, before we change
  its command.
2004-11-05 09:05:15 +00:00
Pawel Jakub Dawidek
06697d4f59 Ehh. Introduce a hack: Wait for 3 seconds, so GEOM is able to give us
providers for tasting. Before this hack, race below is possible:
	SI_SUB_RAID (no not-fully-configured geoms, so don't block)
	GEOM tasting (now geoms are created)
	SI_SUB_MOUNT_ROOT (if root file system is placed on a mirror, it is
		possible that this mirror is not fully configured yet)
There is a lot of work to do to avoid such hacks and I need a working
solution before 5.3, sorry.

Reported by:	John Hay <jhay@icomtek.csir.co.za>
2004-10-14 07:55:29 +00:00
Pawel Jakub Dawidek
7aefe57c5c Be sure to always return 0 for negative access requests.
Reported by:	Maciej Kucharz <qk@comp.waw.pl>
2004-10-07 20:13:23 +00:00
Pawel Jakub Dawidek
dd12956ac7 Geoms without softc are geoms which are initialized, so wait for them. 2004-10-06 18:47:15 +00:00
Pawel Jakub Dawidek
18d2addc23 Look out for geoms without softc.
Reported by:	tegge
2004-10-06 14:15:47 +00:00
Pawel Jakub Dawidek
59883b3b34 Before root file system is mounted, wait for mirrors in degraded state. 2004-10-05 11:17:08 +00:00
Pawel Jakub Dawidek
604fce4f60 Just use MAXPHYS as maximum I/O request size, instead of using my own
#define for this purpose.
No functional change.
2004-09-28 07:33:37 +00:00
Pawel Jakub Dawidek
829c0864cb Minor, but very important condition fix. The current one can never be true. 2004-09-27 19:32:26 +00:00
Pawel Jakub Dawidek
cf41526bdc Decrease kern.geom.mirror.timeout to 4, so it is smaller than
vfs.root.mountdelay by default.
2004-09-27 13:47:37 +00:00
Pawel Jakub Dawidek
0217ba9893 Forgot to commit addition of ds_resync field. 2004-09-26 20:42:35 +00:00
Pawel Jakub Dawidek
e8adbe4499 Avoid race while synchronizing components. It is very hard to bump into,
but it is possible:
1. Read data from good component for synchronization.
2. Write data to the same area.
3. Write synchronization data, which are now stale.

Found by:	tegge
2004-09-26 20:41:07 +00:00
Pawel Jakub Dawidek
31522023f9 Simplify code a bit. 2004-09-26 20:30:15 +00:00
Pawel Jakub Dawidek
201dfcf143 This is not needed anymore, it is forced in GEOM now.
Actually, it can even cause some problems, because GEOM requires sectorsize
to be more than 0 on first access, not on provider creation, so we can skip
valid providers by doing this check here.

Reported by:	Divacky Roman <xdivac02@stud.fit.vutbr.cz>
		Sven Willenberger <sven@dmv.com>
2004-09-20 17:26:25 +00:00
Pawel Jakub Dawidek
f7b4d339ac Show current status of mirror device directly.
Suggested by:	Krzysztof Ciep³ucha <kris@home.pl>
2004-09-08 16:37:22 +00:00
Pawel Jakub Dawidek
6d7b8aecd3 Allow to configure debug level from /boot/loader.conf. 2004-08-30 18:50:06 +00:00
Pawel Jakub Dawidek
45d5e85a40 GCC, ehh. 2004-08-29 14:29:30 +00:00
Pawel Jakub Dawidek
29c78ab315 Skip providers with not defined sector size.
Reported by:	kuriyama
2004-08-26 12:42:47 +00:00
Pawel Jakub Dawidek
c8b906bcbe Allow to set kern.geom.mirror.timeout from /boot/loader.conf. 2004-08-23 20:42:34 +00:00
Pawel Jakub Dawidek
d86bc96cab We really don't want to receive spoil event for synchroniztion consumers. 2004-08-18 23:33:37 +00:00
Pawel Jakub Dawidek
f1ad62a4d8 Bump synchronization ID if we are sure, that we have ACTIVE components. 2004-08-18 07:28:48 +00:00
Pawel Jakub Dawidek
f62d59df32 Avoid code duplication by introducing g_mirror_write_metadata() function,
which is used now by g_mirror_clear_metadata() function and
g_mirror_update_metadata() function.
2004-08-15 13:58:29 +00:00
Pawel Jakub Dawidek
887c9fd564 MFp4: Simplify code a bit:
- Remove kern.geom.mirror.sync_block_size sysctl. It is quite obvious that we
  want to use the biggest size possible.
- Do not use UMA zone for sync data allocations. There could be only one
  synchronization request per synchronized disk at a time, so allocate memory
  for one request on whole synchronization process related to one disk.

Tested by synchronizing one component (out of three) and by synchronizing
two components (out of three) in parallel.
2004-08-11 23:41:53 +00:00
Pawel Jakub Dawidek
445a4b68f2 Actually, HARDCODED flag isn't stored in metadata, so don't bother
dumping it.
2004-08-11 22:16:42 +00:00
Pawel Jakub Dawidek
2def749bb1 - Fix typo.
- Dump HARDCODED flag.
2004-08-11 22:12:44 +00:00
Pawel Jakub Dawidek
6d8fb92d78 Try harder to not panic on 'stop -f'.
After the commit, this command should be really safe to use.
2004-08-11 11:10:46 +00:00
Pawel Jakub Dawidek
6b2b3e8745 - Recognize HARDCODED flag when dumping consumer configuration.
- Improve code readabilty a bit.
2004-08-10 19:53:31 +00:00
Pawel Jakub Dawidek
c38d2f4eca Forgot to commit those: introduce hardcoded provider functionality,
which allow to store provider's name in the metadata and avoid
problems when few providers share the same last sector.
2004-08-10 19:52:12 +00:00
Pawel Jakub Dawidek
6c74f5177c - Introduce option for hardcoding providers' names into metadata.
It allows to fix problems when last provider's sector is shared between few
  providers.
- Bump version number for CONCAT and STRIPE and add code for backward
  compatibility.
- Do not bump version number of MIRROR, as it wasn't officially introduced yet.
  Even if someone started to play with it, there is no big deal, because
  wrong MD5 sum of metadata will deny those providers.
- Update manual pages.
- Add version history to g_(stripe|concat).h files.
2004-08-09 11:29:42 +00:00
Poul-Henning Kamp
5721c9c76a Tag all geom classes in the tree with a version number. 2004-08-08 07:57:53 +00:00