Commit Graph

546 Commits

Author SHA1 Message Date
Adrian Chadd
720e6a9c6f Add iwn-100 firmware.
The firmware is from the Linux firmware git repository; the intel
licence is the same as other firmware blobs.

Tested: iwn1: <Intel Centrino Wireless-N 100> mem 0xf4800000-0xf4801fff irq 19 at device 0.0 on pci5
2014-08-28 00:05:02 +00:00
Adrian Chadd
823b2cc633 Add some more OS_MARK() probes to the AR9300 HAL. 2014-08-11 00:03:50 +00:00
Adrian Chadd
2dc7b713de Work around some rather annoying chip hangs in the AR9331 chip.
If powersave is enabled and there are any transitions to network
or full sleep - even if they're pretty damned brief - eventually
something messes up somewhere and the bus glue between the AR9331
SoC and the AR9331 wifi stops working.  It shows up as stuck DMA
and LOCAL_TIMEOUT interrupts.

Both ath9k and the reference driver does a full chip reset if things
get stuck.

So:

* teach the AR9330 HAL about the force_full_reset option I added a
  couple of years ago;
* if the chip is currently in full-sleep, do a full-reset;
* if TX DMA and/or RX DMA are still enabled (eg, they did get
  stuck during reset) then do a full-reset.

Tested:

* AR9331 SoC, STA mode
2014-08-09 09:12:25 +00:00
Adrian Chadd
a32a326b6d store the AR9300 interrupts away when doing interrupt debugging. 2014-07-26 21:32:03 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Adrian Chadd
9a4cf01f45 Add Atheros AR1111 support to the HAL.
This seems to probe/attach as an AR9485 and thus nothing else besides
adding the device id seems to be required.

ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 1926.8
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000

The NIC I have here is a 1 antenna, 2GHz only device.

Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC.

Tested:

* AR1111 (pretending not to be an AR9485, but failing miserably);
  STA mode with powersave.

Relnotes:	yes
Sponsored by:	Netgate
2014-05-05 07:58:05 +00:00
Adrian Chadd
0694aa7903 Add ar9300_get_next_tbtt().
Tested:

* AR9380, STA mode
2014-04-30 02:29:31 +00:00
Adrian Chadd
91e198f6a2 Only track the power state variable if the power state is changed,
not if the self-generated frame state is changed.
2014-04-30 02:03:47 +00:00
Adrian Chadd
17102f802f Note that the AR9380 and later hardware supports MYBEACON.
(Yes, I said AR5416 in the committed code.  It's still strictly true.)
2014-04-27 23:37:39 +00:00
Kevin Lo
28bc7834e0 Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.
Committed over the TP-LINK TL-WN725N v2 (RTL8188EUS) on amd64 with WPA.
2014-04-25 08:01:22 +00:00
Adrian Chadd
e6f2713747 Fix ah_powerMode setting.
Reported by:	sbruno
2014-03-29 18:56:11 +00:00
Adrian Chadd
bbd4b4346c Also tag the current HAL power mode in ar9300_set_power_mode(). 2014-03-10 06:05:26 +00:00
Christian Brueffer
7f47cbd3ce Retire the nve(4) driver; nfe(4) has been the default driver for NVIDIA
nForce MCP adapters for a long time.

Yays:	jhb, remko, yongari
Nays:	none on the current and stable lists
2014-02-16 12:22:43 +00:00
Gavin Atkinson
e1a5283697 Add firmware for Intel Centrino Wireless-N 105 devices.
Committed from:	Centrino 105 device
2014-01-11 18:56:48 +00:00
Gavin Atkinson
fd71662513 Add firmware version 18.168.6.1 (API version 6) for Intel Centrino
Wireless-N 135 wireless adapters, soon to be supported by iwn(4).

Committed using:	Laptop with Centrino 135 chipset
Obtained from:	wireless.kernel.org firmware downloads
2014-01-05 01:07:14 +00:00
Ian Lepore
6a101ebe72 Remove 'inline' from ar9300_init_pll(), it's too big to inline.
Submitted by:	adrian@
2013-11-08 16:28:00 +00:00
Kevin Lo
24180b6a7d Update firmware for run(4) to version 0.33. 2013-10-18 07:40:50 +00:00
George V. Neville-Neil
06e8e46410 Add firmware for Centrino 2200-N wireless devices.
Driver software for this firmware will be updated in a following commit.
2013-08-28 15:12:51 +00:00
Jean-Sébastien Pédron
0adf4921fb drm/radeon: Import the Radeon KMS driver
This driver is based on Linux 3.8 and a previous effort by kan@.

More informations about this project can be found on the FreeBSD wiki:
    https://wiki.freebsd.org/AMD_GPU

The driver is split into:

  sys/dev/drm2:
    The driver sources.

  sys/modules/drm2/radeonkmw:
    The driver main kernel module's Makefile.

  sys/modules/drm2/radeonkmsfw:
    All firmware kernel module Makefiles. There's one directory and one
    Makefile for each firmware.

  sys/contrib/dev/drm2/radeonkmsfw:
    All firmware binary sources.

  tools/tools/drm/radeon
    Tools to update firmwares or regenerate some headers.

Merging the driver to FreeBSD 9.x may be possible but not a priority for
now.

Help from:	kib@, kan@
Tested by:	avg@, kwm@, ray@,
		Alexander Yerenkow <yerenkow@gmail.com>,
		Anders Bolt-Evensen <andersbo87@me.com>,
		Denis Djubajlo <stdedjub@googlemail.com>,
		J.R. Oldroyd <fbsd@opal.com>,
		Mikaël Urankar <mikael.urankar@gmail.com>,
		Pierre-Emmanuel Pédron <pepcitron@gmail.com>,
		Sam Fourman Jr. <sfourman@gmail.com>,
		Wade <wade-is-great@live.com>,
		(probably other I forgot...)
HW donations:	kyzh, Yakaz
2013-08-25 19:37:15 +00:00
Jung-uk Kim
79c6d94679 Merge ACPICA 20130823. 2013-08-23 23:25:58 +00:00
Adrian Chadd
aca5021d5f Add firmware for the Intel 2030 and variants.
Submitted by:	Cedric GROSS <cg@gross.info>
Obtained from:	Linux, Intel
2013-08-11 01:09:16 +00:00
Adrian Chadd
a887c8a18c Remove a now-unused firmware. 2013-08-11 01:04:07 +00:00
Adrian Chadd
0cdfe2ae89 Update the 6000g2a image.
Obtained from:	Linux, Intel
2013-08-11 01:03:32 +00:00
Rui Paulo
76e51bbc16 Realtek's RTL8712 firmware blob needed by the upcoming rsu(4) driver. 2013-07-29 06:53:42 +00:00
Jung-uk Kim
bf6fac21dc Merge ACPICA 20130725. 2013-07-26 21:34:09 +00:00
Hiren Panchasara
3c9d5a037d Adding urtwn(4) firmware and related changes.
Reviewed by:	rpaulo
Approved by:	sbruno (mentor)
2013-07-10 08:21:09 +00:00
Adrian Chadd
8978a6a9da Check the return value from ath_hal_malloc()
Reported by:	uqs
2013-06-29 16:49:00 +00:00
Jung-uk Kim
b1ddd13145 Move definitions required by userland applications out of acpica_machdep.h. 2013-06-27 00:22:40 +00:00
Jung-uk Kim
8d744e473f Merge ACPICA 20130626. 2013-06-27 00:16:54 +00:00
Adrian Chadd
92b9076a70 If EEPROM data is provided by the AHB layer, copy it in.
This is required for the flash layer code to correctly work.

Tested:

* AR9330 SoC (carambola 2)
2013-06-26 04:53:33 +00:00
Adrian Chadd
860487123c Re-enable the channel set code for the AR933x.
This required a HAL change to map the 2GHz frequency back to an IEEE
channel number in order to fetch some value(s) to program in.
2013-06-26 04:46:43 +00:00
Adrian Chadd
9855e2aff2 In preparation to support AR933x SoC builds, allow the AH_SUPPORT_AR93(xx)
options to set the AR9300 HAL defines.

This enables the Wasp, Hornet (and later Scorpion) SoC code.
2013-06-26 04:34:45 +00:00
Adrian Chadd
a778f8a19a Add a stub AR93xx RF module just to keep the linker happy.
When building AR933x test images, I'd like to only build only the ar9300
HAL.  To do this, it needs to supply an RF linker entry or it won't compile.

Tested:

* AR933x test builds
2013-06-26 04:33:57 +00:00
Adrian Chadd
8ccb8e813f The AR9300 HAL uses this config to program AR_PHY_SWITCH_COM_2 on AR9485
NICs which have bluetooth coexistence enabled.

The WB225 NIC has the common antenna switch configuration set to 0x0 which
disables all external switch bit setting. This obviously won't work when
doing coexistence.

This value is a magic value from the windows .inf files. It _looks_ right
but I haven't yet verified it - unfortunately my AR9285+AR3012 BT combo
has an earlier BT device which doesn't actually _have_ firmware on it.
So I have to fix ath3kfw to handle loading in firmware into the newer
NICs before I can finish testing this.

This may not hold true for CUS198, which is another custom AR9485 board.
2013-06-14 08:15:28 +00:00
Adrian Chadd
429eba61c2 Flip on AH_PRIVATE_DIAG by default; this will include the AR9300 EEPROM
dump code that is worth having around.
2013-06-14 08:13:21 +00:00
Adrian Chadd
b5ddd8005c Add bluetooth setup method functions to the HAL. 2013-06-14 06:15:23 +00:00
Adrian Chadd
94d5d4ada1 If chan is NULL, don't derefrence it.
The bluetooth setup code actually does a channel lookup during setup,
even though we haven't yet programmed in a channel. Sigh.

Tested:

* WB225 (AR9485) + bluetooth
2013-06-14 06:14:49 +00:00
Adrian Chadd
d9006e5951 Set the FreeBSD capability bit to indicate that LNA diversity is enabled.
This is true for the AR9485 and AR933x SoC.
2013-06-13 02:20:45 +00:00
Adrian Chadd
f4af8a6a62 Return HAL_ANT_VARIABLE for now, until it's unstubbed.
This is needed by the slow antenna diversity logic for the AR9485/AR9462
as it's only engaged if the TX diveristy is set to VARIABLE.
2013-06-13 02:19:53 +00:00
Adrian Chadd
a987ae075f Tie in the LNA diversity configuration functions into the HAL. 2013-06-12 15:23:17 +00:00
Adrian Chadd
6ba04f0d20 Fix a false -> AH_FALSE.
Now, why this hasn't tripped _any_ tinderbox builds yet, I dunno.
It's been like this for a while.
2013-05-29 04:21:42 +00:00
Jung-uk Kim
a9d8d09c46 Merge ACPICA 20130517. 2013-05-20 23:52:49 +00:00
Jung-uk Kim
be4147dd7c MFV: r250336
Fix for _INI regression introduced in version 20130328.
2013-05-08 00:20:35 +00:00
Adrian Chadd
0efc449468 Fix this code to compile without warnings - AH_DEBUG was pulling in
ichan, but OS_MARK was not using it.  It only uses it when
AH_DEBUG_ALQ is also defined.
2013-05-02 07:02:23 +00:00
Adrian Chadd
2f544eedb3 Add device identification and probe/attach support for the QCA9565.
The QCA9565 is a 1x1 2.4GHz 11n chip with integrated on-chip bluetooth.
The AR9300 HAL already has support for this chip; it just wasn't
included in the probe/attach path.

Tested:

* This commit brought to you over a QCA9565 wifi connection from
  FreeBSD.
* .. ie, basic STA, pings, no iperf or antenna diversity checking just yet.
2013-05-02 00:59:39 +00:00
Adrian Chadd
a371ba805e Disable TXCONT, it's not here in FreeBSD. 2013-05-01 01:50:33 +00:00
Adrian Chadd
fffa0eea61 There's no HAL_EEPROM in FreeBSD - use ar9300_eeprom_t instead. 2013-05-01 01:49:00 +00:00
Adrian Chadd
d82f130e70 Sync from git - ah_config is in 'ath_hal', not 'ath_hal_private' on
FreeBSD.
2013-04-29 23:57:41 +00:00
Adrian Chadd
e113789bdc Bring over my FreeBSD modifications for the AR9300 HAL to make it
work in FreeBSD.

This is still heavily a work in progress but I'd rather it start
shipping in -HEAD sooner rather than later.

This doesn't (yet) link it into the build system either for a static
kernel or as a module; that will come later (after many, many make universe
tests.)
2013-04-28 00:57:47 +00:00
Adrian Chadd
76bd547b9c Copy the vendor branch ar9300 code from qcamain_open_hal into this
directory.

Only copy the ar9300 HAL, we don't want to grab everything.
2013-04-28 00:53:31 +00:00